Wholesale Interiors CAMELIA User manual

CAMELIA DAYBED
6
Tighten all Bolts from step 2 using L-key (K) and step 3 using L-key (J)
that has been provided. Attach slat (7) to front rail (4) and back rail (5)
by unrolling and securing with 2 screws (I) per each side. Tighten all
screws using Philips Head screwdriver. (not included)
Attach back panel (3) to the back of each left arm & right arm by aligning
the holes and securing with 2 Allen Bolts (D) , 2 Spring Washer (E) , 2
Flat Washer (F) per each side using L-key (J).
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Begin assembly by attaching each leg (6) to the bottom of left arm (1) &
right arm (2) securing with 2 Allen Bolts (B) per panel using L-key (J).
Attach the front rail (4) and back rail (5) to the left arm (1) & right arm (2).
Aligning holes and securing with 2 Allen Bolts (A) per each end using
L-key (K).
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)

Your daybed should be done assembly as below. Attach the trundle front panel (8) & trundle back panel (9) to
the trundle side rail (10) by aligning holes and securing with 2
Allen Bolts (A) per each end. Tighten all Bolts using the
L-key (K).
Attaching 2 castors (13) to the bottom of slat (11) according to
the pre-mark line. Securing with 4 screws (H) per each castor
(13) using Philips Head screwdriver (not included).
Attach slat (11) with castor to the trundle front panel (8) &
trundle back panel (9) securing with 2 Allen Bolts (C) ,
2 Spring Washer (E) , 2 Flat Washer (G) , by using L-key (J)
per each side of slat.
Attach slat (12) to the trundle front panel & trundle back panel
by unrolling and securing with 2 screws (I) per each side.
Tighten all screws using Philips Head screwdriver
(not included).