Wholesale Interiors BBT6423 User manual

MODEL : BBT6423 QUEEN BED
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
ASSEMBLY INSTRUCTIONS
STEP 1
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL 2 PCS
DCENTER RAIL 1 PC
ECENTER SUPPORT 2 PCS
FBED LEG 2 PCS
GCENTER SUPPORT LEG (LONG) 2 PCS
HBED SLAT 26 PCS
IDRAWER BOX 1 PC
JCENTER SUPPORT LEG (SHORT) 1 PC
KDRAWER BOX SUPPORT LEG
(BLACK COLOUR) 2 PCS
HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBB BOLT M8 x 30MM 12 PCS
2JCBC BOLT M6 x 45MM 8 PCS
3WOOD SCREW M3.5 x 16MM 8 PCS
4BED SLAT CENTER FITTER 13 PCS
5BED SLAT SIDE FITTER 26 PCS
6M5 ALLEN KEY (BALL SHAPE) 1 PC
7M4 ALLEN KEY (BALL SHAPE) 1 PC
8M6 FLAT WASHER 8 PCS
9WOOD DOWEL M8 x 30mm 4 PCS
F
STEP 3STEP 2
6
C
A
1
JG
K
I
K
Loosely fix in the bolt.
PAGE 1 OF 2
7
2
8
STEP A STEP B
9
IC
Loosely fix in the bolt.

ASSEMBLY INSTRUCTIONS PAGE 2 OF 2
STEP 4 STEP 5
STEP 6
Palm
Palm
H
5
H
4
D
A
3
C
E
STEP 7
H
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
B
C
1
6
Attached Footboard (B) on drawer box using bolt (1) and tighten
with allen key (6).
Then,screw tied the step 2 and step 3 bolt. Center rails with short center support legs face to
footboard,it will be on top of drawer box.