Wholesale Interiors BRADY User manual

ITEM : BRADY - KB
4
5
E
L
F
NO PART LIST QTY
HEADBOARD
CUSHION 1PC
WING
(L)
FOOTBOARD
FOOTBOARD
LEG
ITEM HARDWARE QTY
SPRING WASHER
FLAT WASHER
SCREW
M4 x 32MM
L - KEY
M5 x 65MM
1PC
1PC
1PC
2PCS
4PCS
14PCS
14PCS
8PCS
1PC
1
2
3
4
5
A
B
C
D
E
6
2PCS
SIDE RAIL
(L/R)
WING
(R)
7
SIDE RAIL
(L/R) 2PCS
SIDE RAIL
SUPPORT LEG 2PCS
8
9
10
SLAT
SUPPORT LEG
WITH ADJUSTABLE FEET
4PCS
8PCS
JCBB SCREW
M8 x 20MM
JCBC SCREW
M6 x 25MM
JCBC SCREW
M6 x 35MM
JCBC SCREW
M6 x 70MM
WOOD DOWEL
M8 x 30
L - KEY
M4 x 65MM
2PCS
2PCS
JCBC SCREW
M8 x 50MM 4PCS
8PCS
14PCS
1PC
F
G
H
I
J
K
WOOD DOWEL
M10 x 30 4PCS
L
SPRING WASHER
(FOR M8)
FLAT WASHER
(FOR M8)
M
N
4PCS
4PCS
NOTE : AFTER A FEW DAYS OF ASSEMBLY , IT WILL HAVE ACCLIMATIZEDTO THE ENVIRONMENT
PLEASE TIGHTEN ALL HARDWARE. CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
1
BACK 2
3
L
R
I
H
C
L
STEP 1
Begin assembly by attaching each wing (2) & (3) to each side of headboard cushion (1) by
aligning the hole and securing with 3 Allen Bolts (C) , 3 spring washer (H) , 3 flat washer (I)
per side using L-key (L).
STEP 2
Attach each footboard legs (5) to the bottom of the footboard cushion (4) by inserting a dowel
(F) & securing with 1 Allen Bolt (E) per leg using L-key (L).

8
6(L)
7(L)
K
L
C
STEP 5.1
J
9
STEP 5.2
9
10
1
3
2
4
STEP 4.1
STEP 4.2
DMN
K
A
I
H
B
L
G
6(R)
7(R)
6(L)
7(L)
7(R)
6(R)
ASSEMBLY
COMPLETED
NOTE : AFTER A FEW DAYS OF ASSEMBLY , IT WILL HAVE ACCLIMATIZED TO THE ENVIRONMENT.
PLEASE TIGHTEN ALL HARDWARE. CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
Attach the side rail support legs (8) to the join of the side rail (6) &
side rail (7) by securing with 4 Allen Bolts (B) , 4 spring washer
(H) , 4 flat washer (I) per support using L-key (L).
STEP 3 STEP 4
Attach side rail to the wing (2) & (3) by inserting 2 wood dowel
(G). Aligning the holes and securing with 2 Allen Bolts (D) , 2
spring washer (M) , 2 flat washer (N) each side using L-key (K).
Attached side rail to footboard (4) by securing with 2 Allen Bolts
(A) using L-key (K).
STEP 5
Attach support legs (10) to slat (9) by securing with 1 Allen Bolt
(C) per support leg. Attach slat (9) to side rail by securing with 1
screw (J) per each side. Tighten all screws using philips head screw
driver (NOT INCLUDED). Tighten all bolts on step 3 & 4 using
L-key (L) & tighten bolts on step 5 using L-key (K).
STEP 6