Wholesale Interiors BBT6570 User manual

10
3
5
4
ASSEMBLY INSTRUCTIONS HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB BOLT M8 x 30mm 4 PCS
2 JCBB BOLT M8 x 40mm 6 PCS
3 JCBB BOLT M8 x 50mm 4 PCS
4 M8 FLAT WASHER 6 PCS
5M8 SPRING WASHER 6 PCS
6 WOOD SCREW M3.5 x 16mm 12 PCS
7 PVC BLACK WASHER 4 PCS
8BED SLAT SIDE FITTER 26 PCS
9BED SLAT CENTER FITTER 26 PCS
10 M5 ALLEN KEY (BALL SHAPE) 1 PC
MODEL : BBT6570 (W1980 x L2070mm) BED PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL (L) 1 PC
DSIDE RAIL (R) 1 PC
ECENTER RAIL 2 PCS
FCENTER SUPPORT 3 PCS
GCENTER SUPPORT LEG 6 PCS
HBED SLAT 39 PCS
IBED LEG 4 PCS
1 of 3
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
STEP A
STEP B
STEP 1 STEP 2
I
7
B
A
G
E
A
BACK VIEW
FRONT VIEW
x4

ASSEMBLY INSTRUCTIONS 2 of 3
Loosely fit bolt (1) into Footboard (B) as picture shown.
Loosely fit bolt (2) into Headboard (A) as picture shown.
STEP 3
STEP 5
1
B
2
A
E
A
C
6
F
STEP B
STEP A
STEP A
STEP C
STEP B
BACK VIEW
STEP 4.1
B
1
10
D
A
C
10 2
4
52
10
STEP 4.2
Don't screw tied
Don't screw tied
Step C
i) Open the headboard backing zip at bottom.
ii) Tighten the Headboard and Side rail with Bolt (2)
and M8 spring washer (5) and
M8 flat washer (4) from side as picture shown.
**Finish step C,
Please screw tied the step A & B bolt.

Palm
Palm
H
8
H
H
9
STEP A
STEP B
ASSEMBLY INSTRUCTIONS 3 of 3
STEP 6 STEP 7
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
9
8
H