Whyte WT51-10 User manual

5 Wire Taps & Splitters
INSTRUCTION MANUAL
WT51-10 | WT51-20 | WT52-10 | WT52-20
WT53-10 | WT53-20 | WT52-05
www.whytetechnologies.com
In the interest of connuous improvement,
all specicaons of products within this brochure are
subject to change without noce.

CONTENTS
Safety
Precauons
Guarantee
General Descripon
Technical Descripon
Example 5 wire 4-way splier
Example 5 wire 5-way splier
Example Applicaon
Specicaon
3
3
3
4
5
6
8
12
14
SAFETY
The Mulswitches are intended for indoor use only.
Do not install the Mulswitch in damp, humid, hot or dusty areas.
Switch o and remove the power supply when making connecons to the
Mulswitch to avoid damaging the unit.
Always earth bond the Mulswitch using the Earth Bonding Lug and/or the
Earth Terminal Bars to a suitable earth bonding point using minimum 4mm²
diameter earth cable.
PRECAUTIONS
To ensure trouble free operaon:
Do not remove the cover of the Mulswitch or disassemble it as this will
invalidate the guarantee.
The female F connectors on this unit were designed for use with '100' type
coaxial cable with a centre core diameter of 1mm². When using larger CT125
or CT167 cables, you must ensure that suitable F connectors with reducing
pins are used otherwise damage to the unit will occur which will invalidate the
guarantee.
Do not over ghten the F connectors (nger ght only).
GUARANTEE
All Whyte products are guaranteed for a period of 4 years from the date of
purchase against defects. Within this guarantee period, Whyte Technologies
will repair or replace the faulty product. In the unlikely event, please return
any faulty products to your dealer.
The Guarantee will be deemed as void if the serial number on the product
is removed, damaged or illegible. The Guarantee excludes defects caused by
incorrect use, accidental damage, disassembly, water/re/lightning damage or
lack of venlaon.
2 3

EXAMPLE 5 WIRE
4-WAY SPLITTER
EXAMPLE 5 WIRE
5-WAY SPLITTER
WT52-10
+
WS52-05
WT52-10
+
WT52-10
GENERAL DESCRIPTION
Whyte Series 5 Taps & Spliers are a range of 5 wire passive devices that
distribute IF and Terrestrial Signals. The range includes 1 way, 2 way and 3
way Taps with either 10dB or 20dB tap-os and a 2 way Splier with 2 x 4dB
tap-os.
For ease of installaon, each Tap & Splier comes complete with colour coded
600mm F-type leads which enables the Mulswitch to be posioned either
side of the Tap as well as vercally or horizontally to suit the available space.
The Tap outputs are located on the top of the unit to make installaon and
servicing easier. A Green LED indicates the presence of power on the HL and
HH trunk lines.
TECHNICAL DESCRIPTION
Whyte Series 5 Taps and Spliers are DC passing on all IF Trunk Lines. The HL
and HH Tap Lines are DC passing whilst the VL, VH and Terrestrial Tap Lines
are isolated.
An Auxiliary 18V Input is provided on all Taps and Spliers which enables a
Whyte Power Supply Unit to be conveniently connected anywhere on the
system. The Auxiliary Input injects 18V DC on to the HH and HL trunk lines
upwards and downwards.
Whyte Series 5 Taps and spliers can be coupled together to create a multude
of 5 wire spliers with various combinaons of outputs and tap losses as can
be seen below.
2x Outputs
7dB Loss
1x Outputs
6dB Loss
2x Outputs
10dB Loss
2x Outputs
13dB Loss
QUICK FIT
COUPLERS
WT52-10
5 Wire 2 Way
Tap - 10dB
TERR: Freq Range 47~790 MHz Trunk Loss 2dB Tap Loss 10dB
SAT: Freq Range 950~2150 MHz Trunk Loss 3dB Tap Loss 10dB
T
A
P
2
T
A
P
1
DC IN 18V
Whyte
HL VH HH
TERR
VL
HHVH
HL
VL TERR
HHVH
HL
VL TERR
HL VH HH
TERR
VL
WS52-05
5 Wire 2 Way Splitter - 4dB
Whyte
WT52-10
5 Wire 2 Way
Tap - 10dB
TERR: Freq Range 47~790 MHz Trunk Loss 2dB Tap Loss 10dB
SAT: Freq Range 950~2150 MHz Trunk Loss 3dB Tap Loss 10dB
T
A
P
2
T
A
P
1
DC IN 18V
Whyte
HL VH HH
TERR
VL
HHVH
HL
VL TERR
WT52-10
5 Wire 2 Way
Tap - 10dB
TERR: Freq Range 47~790 MHz Trunk Loss 2dB Tap Loss 10dB
SAT: Freq Range 950~2150 MHz Trunk Loss 3dB Tap Loss 10dB
T
A
P
2
T
A
P
1
DC IN 18V
Whyte
HL VH HH
TERR
VL
HHVH
HL
VL TERR
4 5

EXAMPLE CONFIGURATION SPECIFICATION
2.5A Power Supply Unit
Short Circuit & Overload Protection
Model: WPSU - 2.5A
Input: 110- 240VAC 50/60Hz
Output: 18V 2.5A
Gain Gain Gain Gain Gain
Slope Slope Slope Slope Slope
VL HL VH HH
TERR
DC 12V
OFF
ON
VL HL VH HH
TERR
WATS-530
4 X IF + TERR
Launch Amp
Whyte
ON
OFF
DC12V
4G 5G
Multiswitch WM512
Freq Range TERR
Freq Range SAT
Gain TERR
Gain SAT
Max Output TERR
Max Output SAT
Current Consumption
47~790 MHz
950~2150 MHz
9dB
10dB
85dBµV
100dBµV
210mAMax
Whyte
REC6
REC2 REC4 REC8 REC10 REC12
REC5
REC1 REC3 REC7 REC9 REC11
+DC
+DC
DC IN 18V DC OUT 18V
AUXILIARY
ON
OFF
DC12V
4G 5G
Multiswitch WM512
Freq Range TERR
Freq Range SAT
Gain TERR
Gain SAT
Max Output TERR
Max Output SAT
Current Consumption
47~790 MHz
950~2150 MHz
9dB
10dB
85dBµV
100dBµV
210mAMax
Whyte
REC6
REC2 REC4 REC8 REC10 REC12
REC5
REC1 REC3 REC7 REC9 REC11
+DC
+DC
DC IN 18V DC OUT 18V
AUXILIARY
TERR: Freq Range 87~790 MHz Trunk Loss 2dB TapLoss 20dB
SAT: Freq Range 950~2150 MHz Trunk Loss 3dB TapLoss 20dB
T
A
P
2
T
A
P
1
WT52-20
5 Wire 2 Way
Tap - 20dB
DC IN 18V
T
A
P
2
T
A
P
1
Whyte
HL VH HH
TERR
VL
HHVH
HL
VL TERR
HL VH HH
TERR
VL
WT51-10
5 Wire 1 Way Tap - 10dB
TERR: Freq Range 87~790 MHz Trunk Loss 2dB TapLoss 10dB
SAT: Freq Range 950~2150 MHz Trunk Loss 2dB TapLoss 10dB
T
A
P
DC IN 18V
Whyte
HHVH
HL
VL TERR
ON
OFF
DC12V
4G 5G
Multiswitch WM524
Whyte
Freq Range TERR
Freq Range SAT
Gain TERR
Gain SAT
Max Output TERR
Max Output SAT
Current Consumption
47~790 MHz
950~2150 MHz
9dB
10dB
85dBµV
100dBµV
230mAMax
+DC
+DC
REC6
REC2 REC4 REC8 REC10 REC12 REC14 REC16 REC18 REC20 REC22 REC24
REC5
REC1 REC3 REC7 REC9 REC11 REC13 REC15 REC17 REC19 REC21 REC23
DC IN 18V DC OUT 18V
AUXILIARY
ON
OFF
DC12V
4G 5G
Multiswitch WM524
Whyte
Freq Range TERR
Freq Range SAT
Gain TERR
Gain SAT
Max Output TERR
Max Output SAT
Current Consumption
47~790 MHz
950~2150 MHz
9dB
10dB
85dBµV
100dBµV
230mAMax
+DC
+DC
REC6
REC2 REC4 REC8 REC10 REC12 REC14 REC16 REC18 REC20 REC22 REC24
REC5
REC1 REC3 REC7 REC9 REC11 REC13 REC15 REC17 REC19 REC21 REC23
DC IN 18V DC OUT 18V
AUXILIARY
DC IN 18V
ON
OFF
DC12V
4G 5G
Multiswitch WM508
Freq Range TERR
Freq Range SAT
Gain TERR
Gain SAT
Max Output TERR
Max Output SAT
Current Consumption
87~790 MHz
950~2150 MHz
9dB
10dB
85dBµV
100dBµV
210mA Max
Whyte
+DC
+DC
REC6
REC2 REC4 REC8
REC5
REC1 REC3 REC7
DC OUT 18V
AUXILIARY
WT52-10
5 Wire 2 Way
Tap - 10dB
TERR: Freq Range 47~790 MHz Trunk Loss 2dB TapLoss 10dB
SAT: Freq Range 950~2150 MHz Trunk Loss 3dB TapLoss 10dB
T
A
P
2
T
A
P
1
DC IN 18V
Whyte
HL VH HH
TERR
VL
HHVH
HL
VL TERR
TERR: Freq Range 87~790 MHz Trunk Loss 2dB TapLoss 20dB
SAT: Freq Range 950~2150 MHz Trunk Loss 3dB TapLoss 20dB
T
A
P
2
T
A
P
1
WT52-20
5 Wire 2 Way
Tap - 20dB
DC IN 18V
T
A
P
2
T
A
P
1
Whyte
HL VH HH
TERR
VL
HHVH
HL
VL TERR
ON
OFF
DC12V
4G 5G
Multiswitch WM524
Whyte
Freq Range TERR
Freq Range SAT
Gain TERR
Gain SAT
Max Output TERR
Max Output SAT
Current Consumption
47~790 MHz
950~2150 MHz
9dB
10dB
85dBµV
100dBµV
230mA Max
+DC
+DC
REC6
REC2 REC4 REC8 REC10 REC12 REC14 REC16 REC18 REC20 REC22 REC24
REC5
REC1 REC3 REC7 REC9 REC11 REC13 REC15 REC17 REC19 REC21 REC23
DC IN 18V DC OUT 18V
AUXILIARY
ON
OFF
DC12V
4G 5G
Multiswitch WM524
Whyte
Freq Range TERR
Freq Range SAT
Gain TERR
Gain SAT
Max Output TERR
Max Output SAT
Current Consumption
47~790 MHz
950~2150 MHz
9dB
10dB
85dBµV
100dBµV
230mA Max
+DC
+DC
REC6
REC2 REC4 REC8 REC10 REC12 REC14 REC16 REC18 REC20 REC22 REC24
REC5
REC1 REC3 REC7 REC9 REC11 REC13 REC15 REC17 REC19 REC21 REC23
DC IN 18V DC OUT 18V
AUXILIARY
WPSU -2.5A
WATS-530
WM524
WM524
WM524
WM512
WM524
WM508
WM512
WT52-20
WT52-20
WT51-10
WT52-10
Series 5 Taps & Splier
WT51-10 | WT51-20 | WS52-05
950-2150MHz
87-790MHz
4 SAT + 1 TERR
2x 4 SAT + 2x TERR
HL + HH SAT
YES
NO
YES
NO
2dB±1dB
2dB±1dB
10dB
10dB
4dB
>30dB
2A
LED
156 x 136 x 43
YES - 1 Set
384g
950-2150MHz
87-790MHz
4 SAT + 1 TERR
2x 4 SAT + 2x TERR
HL + HH SAT
YES
NO
YES
NO
2dB±1dB
2dB±1dB
20dB
20dB
4dB
>30dB
2A
LED
156 x 136 x 43
YES - 1 Set
376g
950-2150MHz
87-790MHz
4 SAT + 1 TERR
2x 4 SAT + 2x TERR
HL + HH SAT
YES
NO
~
~
~
~
4dB±1dB
4dB±1dB
4dB
>30db
2A
LED
156 x 136 x 43
YES - 1 Set
376g
SAT
TERR
SAT
TERR
SAT
TERR
SAT
TERR
SAT
TERR
Frequency
Inputs (F-Type Connector)
Outputs (F-Type Connector)
DC Input (Injecon of DC applied to)
DC Pass Trunk to Tap
DC Pass Trunk to Trunk
Trunk Through Loss
Tap Loss
Fixed Slope Taps (SAT)
Isolaon
Max Current Pass
(Trunk/Trunk Trunk/Tap)
Power Indicaon
Dimensions W x L x H (mm)
Tap Leads Included
Weight
MODEL WT51-10 WT51-20 WS52-05
Whyte Technologies - Unit 13 Watermill Business Centre, Edison Road, Eneld, EN3 7XF | Tel: [phone] | www.whytetechnologies.com
4 Years Warranty
Inbuilt LTE lter
LED power indicator
Colour coded inputs and outputs
Comes with high quality colour coded leads included
Tap outputs on top of unit for easy access
Auxiliary 18V Input injects power to HL & HH trunk cables
Taps and Spliers can be connected together to create a
multude of spliers with varying aenuaon levels
Whyte Series 5 Taps & Spliers are a range of 5 wire passive
devices that distribute Satellite and Terrestrial Signals. The range
includes 1 way, 2 way and 3 way Taps with either a 10dB or 20dB
tap o and a 2 way Splier. For ease of installaon, each unit
comes complete with high quality colour coded 600mm F-type
leads.
This enables the Mulswitches to be posioned either side of
the Tap or Splier, and to be orientated vercally or horizontally
depending on available space.
In the interest of connuous improvement, all specicaons of products are subject to change without noce.
6 7

Unit 13, Watermill Business Centre. Edison Road, Eneld. EN3 7XF
Tel: [phone] | [email protected] | www.whytetechnologies.com
Copyright © Whyte Technologies June 2020