Wido KF100PROB User manual

ASSEMBLY INSTRUCTIONS FOR KF100PROB
Before assembling your new facial bed, please make sure your
package includes the following.
Parts Included:
Legs Long Pole Adjustable long head lever
A=2X B=1X C1=1X
Adjustable short leg lever
C2=1X
Arm Rest Long Spring Head Pillow
D=2X E=2X F=1X

***Until all parts are in place, it is very important to keep ALL
screws and bolts loosen while assembling this unit***
1. Connect part B pole in to A poles. Refer to diagram .Attach part
C to part A. The handle for the adjustable levers will need to be
opposite direction of each other.
2. Place the facial bed downwards and position the base frame on
top.

***Until all parts are in place, it is very important to keep ALL
screws and bolts loosen while assembling this unit***
3. Mount part A (the frame) on to the facial bed with the screws
provided while keeping the screws still loosen.
4. Now tighten all the screws in this following order: C,, B and A
5. Part E (long spring) attaches to the top portion of the facial bed
and also attaches to the bottom portion of the facial bed. To
attach the springs, adjust the top portion of the facial bed
positioning it at a 90 degree angle and adjust the bottom portion
positioning it at a 45 degree angle.
6. Connect the bendable arm rest to the facial bed.
Your Facial bed is now complete!