Wildgame N6E User manual

Model # N6E
602 Fountain Parkway
Grand Prairie, TX 75050
800.847.8269
“Wildgame Innovations”and the“Button Logo”are TM trademarks of Wildgame Innovations, LLC.
“Sport Responsible” , “Redux” and “Flextime”are TM trademarks of WGI Innovations, LTD. User’s Manual
Infrared Digital Scouting Camera

Includes
Features
USB Cable 2 - Bungee Cords User Manual
Camera UnitFlextime Player
Software
RESOLUTION
FLASH
FLASH RANGE
SENSOR
SENSOR RANGE
IMAGE FORMAT
MEMORY
USB
IMAGE RESOLUTION
POWER SUPPLY
AUXILIARY POWER
BATTERY LIFE
ONBOARD POWER
HOUSING
MOUNTING
REDUX
MAX: 6 MP
30 High Intensity Infrared LED’s
up to 65 feet
Passive Infrared Sensor (PIR) Motion and Heat
up to 60 feet
JPEG - Digital Still / AVI - Digital Video
up to 32GB SD Card (not included)
5-PIN Mini USB style - included
High (6MP)
Medium (4MP)
Low (2MP)
4 C-Cell batteries (not included)
External power port
Estimated up to 3 months (in PIR mode)
Battery life may be reduced in Flextime mode
(depending on Flextime setting)
Built in battery to retain Time and Settings
Weather resistant with rubber gaskets
2 Bungee cords - included
Technology to reduce motion blur during
transition time
page 1
page 2
NOTE: Flextime Player Software is optional.
Flextime files can be played by using most
media players.

Includes
Features
USB Cable 2 - Bungee Cords User Manual
Camera UnitFlextime Player
Software
RESOLUTION
FLASH
FLASH RANGE
SENSOR
SENSOR RANGE
IMAGE FORMAT
MEMORY
USB
IMAGE RESOLUTION
POWER SUPPLY
AUXILIARY POWER
BATTERY LIFE
ONBOARD POWER
HOUSING
MOUNTING
REDUX
MAX: 6 MP
30 High Intensity Infrared LED’s
up to 65 feet
Passive Infrared Sensor (PIR) Motion and Heat
up to 60 feet
JPEG - Digital Still / AVI - Digital Video
up to 32GB SD Card (not included)
5-PIN Mini USB style - included
High (6MP)
Medium (4MP)
Low (2MP)
4 C-Cell batteries (not included)
External power port
Estimated up to 3 months (in PIR mode)
Battery life may be reduced in Flextime mode
(depending on Flextime setting)
Built in battery to retain Time and Settings
Weather resistant with rubber gaskets
2 Bungee cords - included
Technology to reduce motion blur during
transition time
page 1
page 2
NOTE: Flextime Player Software is optional.
Flextime files can be played by using most
media players.

Installing Batteries
Open the door at the bottom of the camera by
unlatching the locking tabs.
1.
With the camera facing open, open the battery
compartment cover by sliding the latch to the
left. (Illustration A and B)
2.
With the bottom of the camera
towards you, load two C-cell batteries
with the positive ends towards you in
the left battery chamber and load two
C-cell batteries with the negative
ends towards you in the right battery
chamber.
3.
Close battery compartment cover. To
latch the cover simply pull the latch
slightly to the left as you close the
battery compartment cover.
4.
Load SD memory card (up to 32GB not
included) into the SD card slot with the
connectors facing up.
5.
Illustration A
Illustration B
POWER
TIPS:
Make sure the SD Card is unlocked (small
switch on the side of the SD Card) or the
camera LCD will read “LOCK”.
page 3
page 4

Installing Batteries
Open the door at the bottom of the camera by
unlatching the locking tabs.
1.
With the camera facing open, open the battery
compartment cover by sliding the latch to the
left. (Illustration A and B)
2.
With the bottom of the camera
towards you, load two C-cell batteries
with the positive ends towards you in
the left battery chamber and load two
C-cell batteries with the negative
ends towards you in the right battery
chamber.
3.
Close battery compartment cover. To
latch the cover simply pull the latch
slightly to the left as you close the
battery compartment cover.
4.
Load SD memory card (up to 32GB not
included) into the SD card slot with the
connectors facing up.
5.
Illustration A
Illustration B
POWER
TIPS:
Make sure the SD Card is unlocked (small
switch on the side of the SD Card) or the
camera LCD will read “LOCK”.
page 3
page 4

Power Save
Power On
Setting Time
1.
Check the battery level icon to ensure
the batteries just installed contain the
proper charge level. If so, you are ok to
proceed with camera use.
2.
To turn the unit ON press and release
the power button.
1. To change date and time, start by
pressing and release the center
navigation button to set the hour.
2. Press the left or right navigation
button to go up or down in sequence.
3. When the hour is set, repeat steps 1
and 2 to set the minutes.
POWER
POWER
POWER
POWER
page 5
page 6
Test Mode
POWER
PIR LED Status Light: During the first
2 minutes of Ready Mode, the red light
will illuminate when a PIR event is
triggered. The red light will blink for
2-3 seconds when photo is taken
during this first 2 minutes. After 2
minutes all indicator lights will turn
off until a button is pressed.
1. LCD Ready Mode: The camera will
automatically enter Ready Mode if a
button is not pressed for greater than
30 seconds. The status lights will
illuminate for a total of 2 minutes.
2.
After 30 seconds without any buttons
being pushed, the LCD will turn off and
camera enters into Power Save or
Ready Mode.
1.
The LCD screen can be awakened by
pressing the Power button briefly.
Note: The LCD will not “wake up” when
camera is writing to memory.
2.

Power Save
Power On
Setting Time
1.
Check the battery level icon to ensure
the batteries just installed contain the
proper charge level. If so, you are ok to
proceed with camera use.
2.
To turn the unit ON press and release
the power button.
1. To change date and time, start by
pressing and release the center
navigation button to set the hour.
2. Press the left or right navigation
button to go up or down in sequence.
3. When the hour is set, repeat steps 1
and 2 to set the minutes.
POWER
POWER
POWER
POWER
page 5
page 6
Test Mode
POWER
PIR LED Status Light: During the first
2 minutes of Ready Mode, the red light
will illuminate when a PIR event is
triggered. The red light will blink for
2-3 seconds when photo is taken
during this first 2 minutes. After 2
minutes all indicator lights will turn
off until a button is pressed.
1. LCD Ready Mode: The camera will
automatically enter Ready Mode if a
button is not pressed for greater than
30 seconds. The status lights will
illuminate for a total of 2 minutes.
2.
After 30 seconds without any buttons
being pushed, the LCD will turn off and
camera enters into Power Save or
Ready Mode.
1.
The LCD screen can be awakened by
pressing the Power button briefly.
Note: The LCD will not “wake up” when
camera is writing to memory.
2.

Setting Date
Trigger Flextime
Location
1. Press the center navigation button
after setting the minute to change the
Day.
2. Press the left or right navigation
button to go up or down in sequence.
3. When the DAY is set, repeat steps 1
and 2 to set the Month and Year.
POWER
POWER
POWER
POWER
1. Press the center navigation button
while Location is selected. The first
character will be blinking.
1. Press the center navigation button
while Trigger is selected. The
highlighted option will be blinking.
2. Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
2. Press the left or right navigation
button to go up or down in sequence.
Press the center navigation button
when the character shown is what you
want and move to the next character.
3. Repeat steps 1 and 2 to set the rest of
the characters. Press the center
navigation button to skip spaces and
save the location name.
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
1. Press the center navigation button
while Flextime is selected. The
highlighted option will be blinking.
2. Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
POWER
POWER
page 7
page 8
TRIGGER:
PIR MODE: Takes a photo or video only
when the PIR sensor is triggered.
FLEXTIME (Time Lapse): Takes time lapse
images at set intervals during the key
movement periods of the day, depending
on your Flextime settings.
BOTH: Both PIR and Flextime are active.
The Interval setting is set by the Delay
Setting on the camera with a 1 minute
minimum Flextime delay. See chart on
the next page for Flextime options.
NOTE: Camera needs at least 48 hours
in the field to acclimate to the environ-
ment for Flextime to function properly.

Setting Date
Trigger Flextime
Location
1. Press the center navigation button
after setting the minute to change the
Day.
2. Press the left or right navigation
button to go up or down in sequence.
3. When the DAY is set, repeat steps 1
and 2 to set the Month and Year.
POWER
POWER
POWER
POWER
1. Press the center navigation button
while Location is selected. The first
character will be blinking.
1. Press the center navigation button
while Trigger is selected. The
highlighted option will be blinking.
2. Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
2. Press the left or right navigation
button to go up or down in sequence.
Press the center navigation button
when the character shown is what you
want and move to the next character.
3. Repeat steps 1 and 2 to set the rest of
the characters. Press the center
navigation button to skip spaces and
save the location name.
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
1. Press the center navigation button
while Flextime is selected. The
highlighted option will be blinking.
2. Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
POWER
POWER
page 7
page 8
TRIGGER:
PIR MODE: Takes a photo or video only
when the PIR sensor is triggered.
FLEXTIME (Time Lapse): Takes time lapse
images at set intervals during the key
movement periods of the day, depending
on your Flextime settings.
BOTH: Both PIR and Flextime are active.
The Interval setting is set by the Delay
Setting on the camera with a 1 minute
minimum Flextime delay. See chart on
the next page for Flextime options.
NOTE: Camera needs at least 48 hours
in the field to acclimate to the environ-
ment for Flextime to function properly.

PIR Mode
1. Press the center navigation button
while PIR Mode is selected. The
highlighted option will be blinking.
PIR MODE:
STILL: The camera takes still
photographs.
VIDEO: The camera takes 30
second videos.
2. Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
POWER
POWER
PIR Active
1. Press the center navigation button
while PIR Active is selected. The
highlighted option will be blinking.
PIR ACTIVE:
24 HR: The PIR can be active at all
times.
DAY: The PIR can be active in
daylight hours only.
NIGHT: The PIR can be active in
nighttime hours only.
2. Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
POWER
POWER
page 9
page 10
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime period:
1. 15 min before Sunrise
to 15 min after Sunset
1 HOUR
AFTER
SUNRISE
1 HOUR
BEFORE
SUNSET
15 MINUTES
BEFORE
SUNRISE
15 MINUTES
AFTER
SUNSET
FLEX
TIME FLEX TIME
FLEX
TIME FLEX TIME
PIR
INACTIVE
Camera is inactive before and after Flextime periods. Flextime is active twice a day.
Flextime is active twice a day.
Flextime is active during daytime.
Camera is in PIR mode before and after Flextime periods.
Camera is in PIR mode before and after Flextime periods.
INACTIVE
INACTIVE
INACTIVE
INACTIVE
INACTIVE
PIR
PIR
FLEXTIME
PIR PIR
P1
FLEXTIME selected
BOTH selected
P2
INTERVAL
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime + PIR period:
1. 15 min before Sunrise
to 1 hour after Sunrise.
2. 1 hour before Sunset
to 15 min after Sunset
Flextime + PIR period:
1. 15 min before Sunrise
to 15 min after Sunset
P1
P2
INTERVAL
1 HOUR
AFTER
SUNRISE
1 HOUR
BEFORE
SUNSET
15 MINUTES
BEFORE
SUNRISE
15 MINUTES
AFTER
SUNSET
FLEX
TIME FLEX TIME
FLEX
TIME FLEX TIME
PIR
PIR PIR
PIR PIRPIR
PIR
FLEXTIME & PIR
PIR PIR
Camera is inactive before and after Flextime + PIR periods. Flextime + PIR is active twice a day.
Camera is in PIR mode before and after Flextime + PIR periods. Flextime + PIR is active twice a day.
Camera is in PIR mode before and after Flextime + PIR periods. Flextime + PIR is active during daytime.