Wildix WIZYCONF-VOICE User manual


Answer / Hang up a call via Bluetooth
Short press the button to answer an incoming call, long
press to reject an incoming call.
During a call, short press the button to hang up.

Turn off the Bluetooth function
Press and hold (2secs) the Bluetooth button .

Mute the speakers
Press the button to mute the speaker, the button turns
red.

Mute the microphones
Press the button to mute the microphones, the button
turns red.

Adjust volume
Press the button to increase the volume level.
Press the button to decrease the volume level.

ON/OFF switch
Move the switch situated on the sidebar to ON position:
Wizyconf-Voice is now using the built-in battery.
ON/OFF state does not affect USB charging and USB
connection to the PC.
Note: keep the switch in the OFF position to save the
battery power, when you are not using the unit.

Separate microphone selection
Press the button to turn on only one microphone
which is closer to the talker and mute two others. The
operating microphone’s indicator turns green.
Charging the unit
The battery indicator turns red and flashes, when
less than 10 minutes of talk time remain. Connect the unit to
the PC or charging adapter to charge the battery.
Note: when using the charging adapter, make sure it is a
qualified one and the output voltage is less than 5V.
Sound pickup range
In normal room conditions, the reception distance can reach
up to 4 meters. Three built-in microphones provide
360-degree coverage.
The sound pickup range may differ depending on the
operating environment and conditions.
Connecting external mics WIZYCONF-VOICE-2EXTMIC
Connect the microphone cord to one of the MIC ports
situated on the back of the Wizyconf-Voice speakerphone.
Position the microphones for the best voice pick up.


Muting/Unmuting the microphones during a call 
The microphones volume is on by default when the
Wizyconf-Voice speakerphone is powered on.
Tap the button on the expansion microphone to mute all
the microphones, including the 3 microphones on the
Wizyconf-Voice speakerphone. All microphone indicator
lights turn red.
Tap the button again on the expansion microphone to
unmute all the microphones.










- 3 - - 4 - 

Key instruction


1.Bluetooth
2.Mute speaker
3.Volume down
4.Volume up
5.Mute microphone
6.Battery level / Choose 
microphone
7.Microphones
8.Speaker
9.Microphone indicators


Connection diagram

Connect to laptop using USB cable / connect to mobile
device / Vision/ SuperVision/ WP600AXX/ W-AIR Office/
W-AIR LifeSaver/ W-AIR Med via Bluetooth:

Connecting to PC or laptop
Connect your Wizyconf-Voice to the USB port on your PC
or laptop using the USB cable.
Note: PC automatically recognizes Wizyconf-Voice but you
need to select Wizyconf-Voice in device selection options of
the application.


Selecting Wizyconf-Voice as an active device for
Videoconference
When entering the conference room, select Wizyconf-Voice
as “Audio output” and “Microphone” device:



Connecting to mobile device/Vision/ SuperVision/
WP600AXX/ W-AIR Office/ W-AIR LifeSaver/ W-AIR
Med
1) Press and hold (2secs) the Bluetooth button 
until the light flashes blue.
2) Enable Bluetooth on the device, and select
Wizyconf-Voice from the list of available Bluetooth
devices.
3) The light turns solid blue when the connection is
established.









































- 1 - - 2 - 