Wilson Electronics PRO 710i User manual

A Wilson Electronics Brand
wilsonpro.com 866.294.1660
Installation Guide
PRO 710i
Industrial Class In-Building Cell Signal Amplifier
Supporting Band 71 (600MHz)

Package Contents 1
About The Pro 710i 2
Key Features 4
Post Install Setup 5
Menu System 7
Safety Guidelines 11
Warranty 13
Index

PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
1
Package Contents
Pro 710i
Kit 460064

INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER PRO 710i
2
Up to +25 dBm uplink power and 85
dB gain for maintaining connections
with far-away cell towers
Up to +25 dBm downlink
power for improved indoor cell
coverage area
Color touch screen, for easy
installation and displaying detailed
amplifier status
eXtended Dynamic Range (XDR)
for Continuous Connectivity
Industrial Class In-Building Cell Signal Amplifier
Supporting Band 71 (600MHz)
Pro 710i

PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
3
The Pro 710i industrial class, in-building, cell
signal amplifier provides significantly enhanced
band 71 (600MHz) signal strength, supporting
4G LTE and 5G technology. The Pro 710i can
be installed as either a “stand-alone” amplifier
providing exclusive band 71 amplification, or
it can be combined with a new or existing
WilsonPro amplifier system, supporting multiple
bands. Because the Pro 710i is an industrial
class amplifier, local band 71 carrier approval
must be obatined for every installation.
The Pro 710i also incorporates Wilson Electronics’ state-of-the-art XDR (eXtended
Dynamic Range) technology that prevents signal overload conditions which can, in
accordance with regulations, force the amplifier to shut down. When the Pro 710i
senses that any incoming cell signal is too strong and threatens to overload the
system, XDR automatically reduces amplifier gain to compensate while maintaining
signal coverage throughout the building. The Pro 710i incorporates an easy-to-use
color LCD touch screen, and both antenna ports are located on the top of the unit for
simple installation. Like all WilsonPro cell signal boosters, the Pro 710i amplifier system
is universal: it works for all cellular devices, all services and all U.S. and Canada cell
phone carriers using band 71 (600MHz).

INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER PRO 710i
44
Industrial Class Amplification: Up to 100,000 sq. ft. of band 71
(600MHz) coverage with a single amplifier (local carrier approval
required for each installation).
Extended Dynamic Range (XDR) for continuous connectivity:
XDR lets the Pro 710i system work with an incoming signal and
never shuts down due to a strong outside signal.
Onboard Software for Better Control: The amplifier is
automatically controlled with automatic onboard software,
ensuring great connectivity throughout large spaces and multi-
story buildings. The amplifier will adjust its gain level up or down
as required by the conditions of the immediate signal environment.
Color LCD Touch Screen: The Pro 710i utilizes a color LCD
touch screen, for assessing amplifier performance, making
adjustments to the outside antenna, and turning bands on and o.
Key
Features

PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
5
The Pro 710i is designed with advanced internal programming, which allows it to
automatically adjust for a variety of conditions, while still amplifying weak signals.
Once the antenna cables are connected, turn the unit on by connecting the
power supply cord, at the bottom.
hand tighten ONLY
Inside Antenna
Outside Antenna
power supply
with locking feature
slot for installer
business card
Post Install
Setup

INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER PRO 710i
6
PRO 710i
PRO 710i
ENTERPRISE 1300
Stand-alone installation, providing cell coverage for band 71 only.
Pro710i and Enterprise 1300 (Common Mode) combined.
A Wilson Lightning Surge Protector is recommended for all building installations. Make
sure the protector is installed outside the building. Connect it to suitable ground and in
line, between the Outside Antenna and the Signal Amplifier.
Combiner
Inside Dome
Antenna
Inside Dome
Antenna
Band 71, 600 MHz
Cell Tower
Band 71, 600 MHz
Cell Tower
Outside Antennas
Outside Antenna
Bands 4/5/12/13/25
Cell Tower
Installation
Diagram
Combined
Stand Alone

PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
7
The Pro 710i takes about 5 seconds to boot up. Once boot up is complete, the home
screen will appear, showing the amplification and status of each port and band.
A solid green color indicates that a band
is operating correctly with maximum
allowable gain.
A solid yellow color indicates band gain
reduction because of an oscillation
condition. Reposition antennas (increase
separation between indoor and outdoor
antennas, and point in opposite directions)
and then reboot (turn the unit o & on)
the Pro 710i to reactivate the band and
maximize performance. When adequate
separation is achieved, the yellow color
will return to green upon reboot.
Note: when the colro is yellow, the band
is operational; however, performance
is reduced.
Start Up Screen
Band Menu Color Description
Menu System

INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER PRO 710i
8
A red color indicates a band has
been shut down because of a severe
oscillation condition or repeated
oscillation. Reposition antennas
(increase separation between indoor and
outdoor antennas, and point in opposite
directions) and then reboot (turn the unit
o & on) the Pro 710i to reactivate the
band and maximize performance. When
adequate separation is achieved, the red
color will return to green upon reboot.
(MENU SYSTEM cont.)

PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
9
“Full Gain” is displayed if the there is a weak outside signal requiring the amplifier to
operate with maximum allowable gain”. The amplifier is functioning normally; however, a
stronger signal might be obtained with some antenna adjustments.
“XDR Gain” is displayed , indicating that the amplifier has reduced it’s gain to
accommodate a moderate to strong outside signal. The amplifier is functioning
normally and no adjustments are needed.
Settings Screen

INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER PRO 710i
10
Significant oscillation is occurring. Additional separation (isolation) is needed between
inside and outside antennas.
Severe or repeated oscillations have occurred and amplifier has shut o.
(MENU SYSTEM - SETTINGS SCREEN cont.)

PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
11
Warnings
WARNING: Changes or modifications not expressly approved by Wilson Electronics will void the
user’s authority to operate the equipment.
WARNING: E911 location information may not be provided or may be inaccurate for calls served BY
USING THIS DEVICE.
WARNING. This is NOT a CONSUMER device. Is is designed for installation by
FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE
or express consent of an FCC Licensee to operate this device. Unauthorized
use may result in significant forfeiture penalties, including penalties in excess of
$100,000 for each continuing violation.
Safety Guidelines
WARNING: This is NOT a CONSUMER device. It is designed for installation by an
installer approved by an ISED licensee. You MUST have an ISED LICENCE or the
express consent of an ISED licensee to operate this device.
AVERTISSEMENT: Ce n'est PAS un appareil CONSOMMATEUR. Il est conçu pour être
installé par un installateur agréé par un licencié ISED. Vous DEVEZ détenir une
LICENCE ISED ou le consentement exprès d'un titulaire de licence ISDE pour utiliser cet
appareil.
To uphold compliance with network protection standards, all active cellular devices must maintain at
least 6 feet of separation distance from Panel and Dome antennas.
Use only the power supply provided in this package. Use of a non-Wilson Electronics product may
damage your equipment.
RF Safety Warning: Any antenna used with this device must be located at least 8 inches from all persons.
FOR MORE INFORMATION ON REQUIREMENTS SET OUT IN ISED CPC-2-1-05,
SEE BELOW:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html

INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER PRO 710i
12
Model Number 460064
FCC ID PWO460064
IC ID 4726A-460064
Connectors N-Female
Antenna Impedance 50 Ohms
Max Gain 85 dB
Frequency 617-652 MHz, 663-698 MHz
Power output for single cell
phone (Uplink) dBm 600MHz Band 71
24.2
Power output for single cell
phone (Downlink) dBm 600MHz Band 71
24.5
Noise Figure 5 dB nominal
Isolation > 90 dB
Power Requirements 120V AC 0.5A
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be
adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter
incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster
is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency
band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power o on that
band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1
minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut o until the Signal Booster
has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity
are maintained by the Signal Booster’s microprocessor.
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by Wilson Electronics could void the authority
to operate this equipment.
Specifications
B71
Outside antenna maximum permissible
antenna gain (dBi) 50Ω 6.5
Inside antenna maximum permissible
antenna gain (dBi) 50Ω 6.0
Antenna
This radio transmitter has been approved by the FCC and Innovation, Science and Economic Development
Canada to operate with the maximum permissible antenna gain below. Antenna that have a gain greater than
the maximum gain indicated for any type listed are strictly prohibited for use with this device.
Specifications

PRO 710i INDUSTRIAL CLASS IN-BUILDING CELL SIGNAL AMPLIFIER
13
30 DAY MONEY-BACK GUARANTEE
All WilsonPro products are protected by WilsonPro 30-day money-back guarantee.
If for any reason the performance of any product is not acceptable, simply return
the product directly to the reseller with a dated proof of purchase.
3 YEAR WARRANTY
WilsonPro Amplifiers are warranted for three (3) years against defects in
workmanship and/or materials. Warranty cases may be resolved by returning the
product directly to the reseller with a dated proof of purchase.
Signal Amplifiers may also be returned directly to the manufacturer at the
consumer’s expense, with a dated proof of purchase and a Returned Material
Authorization (RMA) number supplied by WilsonPro. WilsonPro shall, at its option,
either repair or replace the product.
This warranty does not apply to any Signal Amplifiers determined by WilsonPro
to have been subjected to misuse, abuse, neglect, or mishandling that alters or
damages physical or electronic properties.
Replacement products may include refurbished WilsonPro products that have been
recertified to conform with product specifications.
RMA numbers may be obtained by contacting Customer Support.
DISCLAIMER: The information provided by WilsonPro is believed to be complete and
accurate. However, no responsibility is assumed by WilsonPro for any business or
personal losses arising from its use, or for any infringements of patents or other rights
of third parties that may result from its use.
MARKETING APPROVAL: Installer and end customer hereby grants to Wilson Electronics the
express right to use installers or end customers company logo in marketing, sales, financial,
and public relations materials and other communications solely to identify Customer as a
Wilson Electronics customer.
Warranty

3301 East Deseret Drive, St. George, UT
www.wilsonpro.com |support.wilsonpro.com
Copyright © 2016 Wilson Electronics. All rights reserved.
Wilson Electronics products covered by U.S. patent(s) and pending application(s)
For patents go to: weboost.com/us/patents
NOT AFFILIATED WITH WILSON ANTENNA
3301 East Deseret Drive, St. George, UT
www.wilsonpro.com |support.wilsonpro.com
Copyright © 2017 Wilson Electronics. All rights reserved.
Wilson Electronics products covered by U.S. patent(s) and pending application(s)
For patents go to: weboost.com/us/patents
NOT AFFILIATED WITH WILSON ANTENNA
A Wilson Electronics Brand
GDE000257_Rev01_05.11.20