WilTec 62058 User manual

Operation Manual
Three-roll Bending Machine
62058
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.

© by WilTec Wildanger Technik GmbH Item 62058 Page 2
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating
manual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to
contact us briefly beforehand or to place your order via the webshop.
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]
To return your goods for exchange, repair or other purposes, please use the following address.
Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service
team before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [email protected]o
Tel: [phone]
Fax: [phone])

© by WilTec Wildanger Technik GmbH Item 62058 Page 3
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Read all safety instructions making sure that you understand them before using this device. Not obeying
the safety instructions of this user’s manual can lead to serious injuries.
Personal safety
•Do not use the device when being tired or under the influence of alcohol, drugs, or medicine.
•Wear appropriate clothing. Do not wear loose clothing, belts, or jewellery. Securely tie long hair
together. They could get caught by moving parts.
•Always wear appropriate protection equipment. This includes anti-slip safety shoes, protection
gloves, approved protection goggles, and hearing protection.
•Do not stoop down too far. Ensure a safe stand and keep your balance.
•Use the tool that matches the respective job to do. Never use the tool for a purpose that it is not
intended to. This device is suitable for deforming metal plates with a max. width of 320 mm.
•Do not make any modifications to the device and only use it for its intended purpose.
•Before operating the device, check it for damaged parts.
•Have the device checked regularly. Maintenance should only be performed by a qualified
person.
Working area
•Keep your working area tidy and well illuminated. A cluttered and poorly lit workplace increases
the risk of accidents.
•Do not operate the device in explosive zones, e.g., near flammable liquids or gases.
•Do not expose the device to rain or humidity. Do not use it where there is a high air humidity.
•Keep children and unauthorised persons away from your working area. Never leave children
unattended. Make sure that children cannot play with the device.
•The device is not intended for use by persons (including children) with impaired or limited
physical, sensory and mental abilities or lack of experience and/or real knowledge, unless they
are supervised by a person responsible for their safety or follow the instructions made by this
person on how to correctly use the device.
Delivery and packaging
•The bending machine is delivered assembled.
•First make sure that the device is complete. Check the packaging material for loose parts of the
machine before disposing of it. In case you find loose parts, try to find the spots on the machine
where a part is damaged or missing. Do not operate a defective device. First contact the client
service.
Storage
•Store the device in a safe place when not using it for a long time.
•Keep it in a dry, well-ventilated place and out of children’s reach.

© by WilTec Wildanger Technik GmbH Item 62058 Page 4
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Operation
•Fix the bending machine to the bench by clamping the lower part of the machine with the help
of a vice.
•Make sure that the device is correctly assembled and adjusted before using it.
•Turn the crank handle to check if the two gear wheels (5) and (19) engage correctly and firmly.
•Make sure that the three roles are clean and free from metal residues (see exploded view).
•Proceed as follows to modify the distance of rolls 1 and 2 (10 and 9):
oTo adjust the distance, use the adjustment screws (12) and (4).
oTurn the adjustment screws clockwise to reduce the distance and to near roll 1 roll 2.
oTurn the adjustment screws (12) and (4) anti-clockwise to increase the distance of roll 1 and
roll 2.
•Slide the sheet to be bended between roll 1 (10) and roll 3 (7). Make sure to keep it straight.
Then tighten the fixing screws (8) and (13). Adapt the rolls to the thickness of the sheet with the
help of the fixing screws.
•Use the adjustment screws (12) and (4) to define the desired bending radius. After adjusting the
radius, you can now begin to use the crank handle to bend the piece. Note that bending a piece
cannot be undone, should the piece have been bent too much. Therefore, be very precise and
carful when adjusting the radius.
•Repeat bending until both edges of the sheet touch each other or the desired bending degree
has been reached.
•After bending, loosen all fixing elements (fixing screws, adjustment screws, etc.). Remove
roll 1 (10) to be able to remove the piece on the right side of the machine.

© by WilTec Wildanger Technik GmbH Item 62058 Page 5
http://www.WilTec.de
http://www.aoyue.eu 11 2021-1
http://www.teichtip.de
Exploded view and parts list
Illustration similar, may vary depending on model
№
Name
№
Name
1
Screw
11
Sleeve
2
Cover
12
Adjustment screw
3
Screw-nut
13
Fixing screw
4
Adjustment screw
14
Screw
5
Gear wheel
15
Screw
6
Bearing plate
16
Screw (long)
7
Roll 3
17
Crank handle
8
Fixing screw
18
Screw
9
Roll 2
19
Gear wheel
10
Roll 1
20
Screw
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.