WilTec 50799 User manual

© by WilTec Wildanger Technik GmbH Seite 8
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Quad bike or mountain bike lift plat-
form
Article: 50799
Technische Änderungen vorbehalten!
Durch stetige Weiterentwicklungen können Abbildungen, Funktionsschritte und technische Daten ge-
ringfügig abweichen.
Aktualisierung der Dokumentation
Haben Sie Vorschläge zur Verbesserung oder haben Sie Unregelmäßigkeiten festgestellt, nehmen Sie
bitte Kontakt mit uns auf.

© by WilTec Wildanger Technik GmbH Seite 9
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
The information contained in this document is subject to change without prior notice. No part of this
document can be copied or duplicated in another form without the prior written consent of WilTec Wil-
danger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in
this user manual or the connection diagram.
Although WilTec Wildanger Technik GmbH has made every effort to make sure that this user manual
is complete, accurate and updated, errors cannot always be avoided. In the event of problems with
this user manual please complete and send this form back to us.
FAX-notification (+++49 2403 55592-15),
from: ________________________________________
Name: ________________
Firm:_____________________
Tel/Fax:__________________
I would like to report the following mistakes:
___________________________________________________________________
Customer Service WilTec Wildanger Technik GmbH
e-mail: [e-mail]
Tel:++ [phone]
introduction
Thank you for purchasing this quality product. In order to minimize the risk of injury, we ask you to
always take some basic safety precautions when using this device. Please read this manual carefully
and make sure you understand them.
The interior of this unit does not contain any user-serviceable parts. Leave maintenance, adjustment
and repair qualified personnel. In the case of a foreign intervention, the 2-year warranty period expires!
Keep these operating instructions in a safe place.

© by WilTec Wildanger Technik GmbH Seite 10
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Safety instructions / warnings
Safety labelings
The owner and/or user must have read and understood the instructions of the device before he may
use it. Introduced staff should be in sure dealing with the used work equipment carefully, exercised
and qualified competently, if they work on engines and their components Warning signs should be
read and understood. The user the instructions as well as the warning signs sufficiently linguistic profi-
ciency dispose, must be discussed and made recognizable by informed in the mother tongue of the
user so that the user knows about the contents of the instructions if about not.
The instructions as well as future safety labelings added should learn and sustain owner and/or user.
Are owner and/or user responsibly that the instructions and safety labelings are always existing. If the
instructions should get lost, a substitute is availably this for the manufacturer.
Control/inspection
Control of the device should be made before every use to be able to exchange broken parts of a build-
ing or missing parts on time. The device must be immediately checked for the manufacturer of an in-
formed if an unexpected fault appears. If perhaps one of the strap chains could be damaged, becom-
ing equipment immediately out of order law must until the repair is run through specialist staff of the
manufacturer and the device authorized again. It is recommended to have anybody check the device
by informed once a year.
•Reading you understand and follow the instructions before you operate the device
•Do not exceed the formatted capacity
•Using only on fastened underground
•Centre the weight on the lift platform
•Please only attach the pipette to it of the manufacturer shown off places
•Check after raising the cargo load immediately whether the mechanical cargo safety is in-
stalled
•Check after raising the cargo load immediately whether the mechanical cargo safety is in-
stalled
•Safeguard the burden with suitable safety harnesses
•This cannot to persons and/or property damages do notes take this into account lead
•Do not carry out any changes at the motorcycle pipette

© by WilTec Wildanger Technik GmbH Seite 11
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Installation notes
6. Fasten the hydraulic cylinder (H) to the base (A) with the help of the screws, washers and nuts
and install the connecting rod.
7. you install the foot pedal at the hydraulic cylinder and fix it with a M8x30 screw (3)
8. Install the safety holders at the connection bar. Using you here for the bar seal, the disks and
the lock buttons (5, 6 und 7)
9. Fasten the grip to the connecting rod with the help of a screw
10. You check, whether all connections are installed tightly and all screws carefully tightened
Notes for the operator
Raising weight
8. Use the pipette only on a slippery and solid underground
9. To prevent a slipping of the burden during the raising process, you centre absolutely the
weight first
10. Place the pipette so that the piston stroke saddle is under the weight centrically
11. You operate the foot pedal till the piston stroke saddle comes with the burden to be raised into
touch. Fix the steering roller. Before raising, you check, that piston stroke saddle and weight
are in the right position
12. Use the foot pedal to raise the burden. Make sure that clicks in the safety-lock correctly, if the
desired height is reached.
13. You secure this one the burden with the lashing straps, if the desired height is reached.
Please take care not to push the lashing straps too far.
Otherwise damages to the belts could occur.
You stabilize the pipette you adapt the stabilization screws in this on a slippery underground.
Letting weight down
4. Raise the weight carefully and release the safety catch of the safety-lock
5. You convert the handle bar if pipettes want this you to let down completely
6. Be quite carefully engaged to let down the burden for certain again.
Maintenance
Exclusively use hydraulic oil and no other liquids, such as braking cleaner, engine oil or oil polluted.
Unsuitable oil can lead to durable damages to the motorcycle pipette.
An oil change should be carried out at least every 6 months. Oil level is about 2.5 cm the recommend-
ed below the one filling opening.

© by WilTec Wildanger Technik GmbH Seite 12
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Operator Should ALWAYS
1. Be familiar with sling operating controls,
procedures and warnings.
2. Make sure all connections to load are
tight and secure.
3. Maintain firm footing when operation
sling.
4. Make sure that load is free to move and
will clear all obstructions.
5. Take up slack carefully, check liad bal-
ance, lift a few inches and check load
holding action before continuing.
6. Avoid swinging of load.
7. Maek sure that all persons stay clear of
the suspended load.
8. Warn personnel of an approaching load.
9. Protect load chain from weld spatter or
other damaging contaminants.
10. Promptly report to your supervisor or re-
pair any malfunction, unusual perfor-
mance, or damage if the sling.
11. Inspect beam regularly, replace dam-
aged or worn parts, and keep appropriate
records of maintenance
Operator Should
1. Never lift more than rated load.
2. Never us damaged sling or sling that is
not working correctly.
3. Never us the beam with twisted, kinked,
damaged or worn chain.
4. Never lift a load if any binding prevents
equal loading on all supporting chains.
5. Never allow attention to be diverted from
operating the sling.
6. Never use beam to lift, support or
transport people.
7. NEVER LIFT LOADS OVER PEOPLE!
8. Never leave a suspended load unattend-
ed.
9. Never allow sharp contact between sling
and obstructions.
10. Nerver allow the chain or link to be used
a as ground for welding.
11. Never allow the chain or link to be
touched by a live welding electrode.
12. Never attempt to lengthen the load chain
or repair damaged chain.
Trouble Shooting
Fehler Ursache Lösung
The pipette cannot be let down
completely 1. air in the hydraulic system 2. vent valve soils 1. Ventilate the hydraulic system 2. Clean the vent valve
The pipette does not keep the
weight 1. Vent valve is open 1. . Fastenings . you the valve
The pipette cannot be raised to
the maximum height 1. Oil level too low 2. Air in the hydraulic system 1. Refilling oil 2. Ventilating hydraulic system
Raising feebly 1. Air in the hydraulic system
2. dirty oil
3. Vent valve is open
1. Ventilating hydraulic system
2. Exchanging oil
3Fastenings . you the valve
complete
Weight is not raised 1. Weight too highly
2. Vent valve is open
3. Oil level too low
1. Reduce the weight
2. Close the valve
3. Refilling oil

© by WilTec Wildanger Technik GmbH Seite 13
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Partlist
Teile Nr. Beschreibung An-
zahl
A Base 1
B Connection 1
C Piston stroke saddle 2
D Connecting rod 1
E Grip 1
F Fastening screw 2
G Return spring 1
H Hydraulic cylinder 1
I Foot pedal holder 1
J Foot pedal 1
K Steering roller 2
M Front wheel fastening 2
N Eye 2
C Hold bolt 1
1 Mother 8 2
2 Washer 8 2
3 Screw M8x30 2
4 Srew M8x25 2
5 Bar seal 15x80 2
6 Plate 16 2
7 Lock button 2
8 Srew M5x25 1