WilTec 62623 User manual

Operation Manual
ARTICLE 62623,62624,62625
Forestry Lifting Tongs
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

© by WilTec Wildanger Technik GmbH Artikel 62623, 62624, 62625 Seite 2
http://www.WilTec.de
http://www.aoyue.eu 11 2020-1
http://www.teichtip.de
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or
placing your order via the webshop.
E-mail: [email protected]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [e-mail]
Tel:[phone]
Fax: [phone]

© by WilTec Wildanger Technik GmbH Artikel 62623, 62624, 62625 Seite 3
http://www.WilTec.de
http://www.aoyue.eu 11 2020-1
http://www.teichtip.de
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
INTENDED USE
The Forestry Lifting Tong has 4 claws to provide safety and stability when working with heavy logs. They
feature durable steel construction which has been designed finish the required job easily.
DESCRIPTION
Forestry pliers for grabbing and transporting logs: With these loading tongs you can save a lot of time
during the loading process of round timber, because the wrapping of logs with chains or ropes is no
longer necessary and can only be performed with a pair of pliers. In addition, the forest floor is signifi-
cantly spared in this way.
Item
Jaw open-
ing
（mm）
Log
Diameter
Capacity
(mm)
Max Capa-
city (kg)
Material
thickness
（mm）
Dimension
（mm）
Weight
（kg）
62623
0-600
520
800
8
350x200x650
13.0
62624
0-700
620
1200
8
420x250x750
17.0
62625
0-800
720
1500
8
450×250×850
19.0

© by WilTec Wildanger Technik GmbH Artikel 62623, 62624, 62625 Seite 4
http://www.WilTec.de
http://www.aoyue.eu 11 2020-1
http://www.teichtip.de

© by WilTec Wildanger Technik GmbH Artikel 62623, 62624, 62625 Seite 5
http://www.WilTec.de
http://www.aoyue.eu 11 2020-1
http://www.teichtip.de
IMPORTANT SAFETY INFORMATION
⚠WARNING
•Read and understand all instructions. Failure to follow all instructions may result in serious injury or
property damage.
•The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situ-
ations that could occur. Exercise common sense and caution when using the tongs. Always be
aware of the environment and ensure that the tongs are used in a safe and responsible manner.
•Do not allow persons to operate or assemble the tongs until they have read this manual and have
developed a thorough understanding of how they work.
•Do not modify the tongs in any way. Unauthorized modification may impair the function and/or safety
and could affect the life of the tongs. There are specific applications for which the tongs were de-
signed.
•Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be a safer experience and do the job better at the capacity for which it was intended. DO NOT use
the tongs for a purpose for which they were not intended.
WORK AREA SAFETY
•Inspect the work area before each use. Keep your work area, dry, free of clutter and well-lit.
Cluttered, wet or dark work areas can result in injury. Using the tongs in confined work areas
may put you dangerously close to cutting tools and rotating parts.
•Keep children and bystanders away from the work area while operating the tongs. Do not al-
low children to handle the tongs.
PERSONAL SAFETY
•Stay alert and watch what you are doing. Always be aware when operating the tongs and do
not use them while you are tired or under the influence of drugs, alcohol or medication. A short
moment of inattention while operating the tongs may result in serious personal injury.
•Dress properly. Do not wear loose clothing, dangling objects or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught by moving
parts.
•Wear proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety
goggles (not usual glasses) with side shields or when needed with a face shield. Us a dust mask
in dusty work conditions. Also use non-skid safety shoes, a hardhat, gloves, dust collection
systems and hearing protection when appropriate. This applies to all persons in the work area.

© by WilTec Wildanger Technik GmbH Artikel 62623, 62624, 62625 Seite 6
http://www.WilTec.de
http://www.aoyue.eu 11 2020-1
http://www.teichtip.de
•Do not overreach. Keep proper footing and balance at all times.
CAUTION! –TONGS USE AND CARE
•Do not force tongs. Products are safer and do a better job when used in the manner for which
they are designed. Plan your work and use the correct product for your job.
•Check for damaged parts before each use. Carefully check that the tongs will operate properly
and perform the intended function. Replace damaged or worn parts immediately. Never operate
the tongs with a damaged part.
•Store the tongs when they are not in use. Store in a dry, secure place out of reach of children.
Inspect the tool for good working condition prior to storage and before using it again.
•Only use accessories that are recommended by the manufacturer for use with your tongs. Ac-
cessories that may be suitable for one product may create a risk of injury when used with an-
other tool. Never use an accessory that has a lower operating speed, pressure or capacity than
the tool itself.
•Keep guards in place and in working order. Never operate the tongs without the guards in place.
SPECIFIC OPERATION WARNINGS
•Do not exceed the rated load capacity.
•Do not stand under or near while load is suspended.
•Before using the tongs, be sure that all bolts are fastened and tightened.
MAINTENANCE
•Maintain the tongs regularly. It is recommended that the general condition of any tool is exam-
ined before using it. Keep your tongs in good repair. Keep them clean, dry and free from oil and
grease.