Windsor Versamatic User manual

OPERATION
Versamatic and Versamatic Plus
WINDSOR
01) Inspect brush for wear using a
credit card and replace if neces-
sary. (Screwdriver necessary
to remove the brushes on some
models)
05) Unplug the cord from the
wall.
04) Starting at the highest
setting, adjust brush height
setting by setting until the
orange light turns off.
02)
Make sure all three prongs are
on the body of the cord and plug
into an outlet. ifone of the Prongs
is missing, notify your suPerVisor.
06) Hold the strain relief in an up-
right position so that the strain
relief will not be damaged when
the cord is wrapped.
03)
Turn the machine on.
07) Wrap the cord for storage start-
ing from the base. Wrapping the
cord properly will help prevent
cord failure.

MAINTENANCE
Versamatic and Versamatic Plus
WINDSOR
01) release lever to remove
front cover (versamatic
plus) or back cover (versa-
matic).
04)
To remove a clog from the hose
press the buttons to remove
the hose and clean with a
broom handle.
02)
Replace bag when full. From
left to right: versamatic plus
bag and versamatic bag.
03)
Replace lters quarterly. From
left to right: versamatic plus
lter and versamatic lter.