Winmate IK70 User manual

IK70 Motherboard
Mini-ITX SBC with Intel® 7th Generation Core i3/i5/i7 processor, HDMI,
Display Port, LVDS, Dual Giga Ethernet, USB 3.0 and NGFF Interface
V110
User Manual
Version 1.2
9171111I103R

USER MANUAL CONTENTS
- 2 -
CONTENTS
PREFACE................................................................................................................................................- 4 -
ABOUT THIS USER MANUAL..................................................................................................................- 8 -
CHAPTER 1: GENERAL INFORMATION .................................................................................................- 10 -
1.1 INTRODUCTION....................................................................................................................................- 10 -
1.2 FEATURES ...........................................................................................................................................- 10 -
1.3 MOTHERBOARD SPECIFICATIONS .............................................................................................................- 11 -
1.4 FUNCTIONAL DESCRIPTION.....................................................................................................................- 13 -
1.5 PHYSICAL DESCRIPTION .........................................................................................................................- 14 -
CHAPTER 2: HARDWARE INSTALLATION ..............................................................................................- 16 -
2.1 MOTHERBOARD COMPONENTS...............................................................................................................- 16 -
2.1.1 Component Side ......................................................................................................................- 16 -
2.1.2 I/O Side....................................................................................................................................- 17 -
2.1.3 Solder Side...............................................................................................................................- 17 -
2.2 MEMORY MODULE (SO-DIMM) INSTALLATION ........................................................................................- 18 -
2.3 I/O EQUIPMENT INSTALLATION ...............................................................................................................- 19 -
2.3.1 12V DC in .................................................................................................................................- 19 -
2.3.2 Serial COM Port .......................................................................................................................- 19 -
2.3.3 HDMI .......................................................................................................................................- 19 -
2.3.4 Display Port .............................................................................................................................- 19 -
2.3.5 Ethernet Interface....................................................................................................................- 19 -
2.3.6 USB Port ..................................................................................................................................- 19 -
2.3.7 Audio .......................................................................................................................................- 19 -
2.4JUMPER SETTINGS ................................................................................................................................- 20 -
2.4.1 JP1: Panel Power Select ...........................................................................................................- 21 -
2.4.2 JP2: Backlight Power Select .....................................................................................................- 21 -
2.4.3 JP3: Backlight Dimming Select ................................................................................................- 21 -
2.4.4 JP4: Backlight Dimming Control Select....................................................................................- 21 -
2.4.5 CLR_CMOS: Clear CMOS Jumper .............................................................................................- 22 -
2.4.6 CLR_RTC: Clear RTC Jumper.....................................................................................................- 22 -
2.5 MAINBOARD CONNECTORS ....................................................................................................................- 23 -
2.5.1 Internal Front Side Connectors ................................................................................................- 23 -
2.5.2 External I/O Side Connectors...................................................................................................- 34 -
CHAPTER 3: DRIVER INSTALLATION .....................................................................................................- 38 -
3.1 CHIPSET DRIVER...................................................................................................................................- 38 -

USER MANUAL CONTENTS
- 3 -
3.2 GRAPHIC DRIVER ................................................................................................................................. - 42 -
3.3 MANAGEMENT ENGINE (ME) AND .NET FRAMEWORK DRIVER .................................................................... - 46 -
3.4 AUDIO DRIVER .................................................................................................................................... - 50 -
3.5 ETHERNET DRIVER................................................................................................................................ - 52 -
3.6 WATCHDOG DRIVER INSTALLATION .......................................................................................................... - 55 -
CHAPTER 4: INSYDE H20 BIOS SETUP ..................................................................................................- 60 -
4.1 HOW AND WHEN TO USE BIOS SETUP .................................................................................................... - 60 -
4.2 BIOS FUNCTIONS ................................................................................................................................ - 62 -
4.2.1 Main Menu..............................................................................................................................- 62 -
4.2.2 Advanced.................................................................................................................................- 63 -
4.2.3 Security....................................................................................................................................- 93 -
4.2.4 Power ......................................................................................................................................- 94 -
4.3 USING RECOVERY WIZARD TO RESTORE COMPUTER.................................................................................... - 98 -
4.4 HOW TO ENABLE WATCHDOG............................................................................................................... - 100 -
CHAPTER 5: TECHNICAL SUPPORT.....................................................................................................- 103 -
5.1 DRIVERS........................................................................................................................................... - 103 -
5.2 SOFTWARE DEVELOPMENT KIT (SDK) .................................................................................................... - 103 -

USER MANUAL PREFACE
- 4 -
PREFACE
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the prior
written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this manual in order to improve design and/or
performance. We assume no responsibility or liability for the use of the described
product(s), conveys no license or title under any patent, copyright, or masks work rights
to these products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes only. We
make no representation or warranty that such application will be suitable for the
specified use without further testing or modification.
Warranty
We warrant that each of its products will be free from material and workmanship defects
for a period of one year from the invoice date. (Standard is one year, extended warranty
will need to discuss with our sales representatives. If the customer discovers a defect, we
will, at its option, repair or replace the defective product at no charge to the customer,
provided it is returned during the warranty period of one year, with transportation
charges prepaid. The returned product must be properly packaged in its original
packaging to obtain warranty service.
If the serial number and the product shipping data differ by over 30 days, the
in-warranty service will be made according to the shipping date. In the serial numbers
the third and fourth two digits give the year of manufacture, and the fifth digit means
the month (e. g., with A for October, B for November and C for December).
For example, the serial number 1W16Axxxxxxxx means October of year 2016.

USER MANUAL PREFACE
- 5 -
Packing List
Before using this Motherboard, please make sure that all the items listed below are
present in your package:
IK0 Motherboard
User Manual & Driver CD
If any of these items are missing or damaged, contact your distributor or sales
representative immediately.
Customer Service
We provide a service guide as below for any problem by the following steps: First,
contact your distributor, sales representative, or our customer service center for
technical support if you need additional assistance.
You need to prepare the following information before you call:
Product serial number
Peripheral attachments
Software (OS, version, application software, etc.)
Detailed problem description
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We
are always ready to give advice on application requirements or specific information on
the installation and operation of any of our products. Please do not hesitate to call or
e-mail us.

USER MANUAL PREFACE
- 6 -
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an example of each
type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to
know.
CAUTION
A Caution alert indicates potential damage to hardware and explains
how to avoid the potential problem.
WARNING!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.

USER MANUAL PREFACE
- 7 -
Safety Precautions
CAUTION
Always ground yourself to remove any static charge before touching
the CPU card. Modern electronic devices are very sensitive to static
electric charges. As a safety precaution, use a grounding wrist strap at
all times. Place all electronic components in a static-dissipative surface
or static-shielded bag when they are not in the chassis.
Safety and Warranty
1. Please read these safety instructions carefully.
2. Please keep this user manual for later reference.
3. Please disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.
7. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
8. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
11. If any of the following situations arises, get the equipment checked by service
personnel:
A. The power cord or plug is damaged.
B. Liquid has penetrated into the equipment.
C. The equipment has been exposed to moisture.
D. The equipment does not work well, or you cannot get it to work according to
the user’s manual.
E. The equipment has been dropped and damaged.
F. The equipment has obvious signs of breakage.

USER MANUAL ABOUT THIS USER MANUAL
- 8 -
ABOUT THIS USER MANUAL
This User Manual provides information about using the IK70 Motherboard. The
documentation set for the IK70 Motherboard provides information for specific user
needs, and includes:
IK70 Motherboard User Manual –contains detailed description on how to use
the motherboard, its components and features.
NOTE:
Some pictures in this guide are samples and can differ from actual
product.
Document Revision History
Version
Date
Note
1.0
3-Jul-2017
Initial release
1.1
15-Aug-2017
Update IK70 SBC to version 110
1.2
19-Dec-2017
Update BIOS to InsydeH20

USER MANUAL CHAPTER 1 GENERAL INFORMATION
- 9 -
GENERAL INFORMATION
This chapter includes the IK70 Motherboard
background information.
1.1 Introduction
1.2 Features
1.3 Motherboard Specifications
1.4 Functional Description
1.5 Physical Description

USER MANUAL CHAPTER 1 GENERAL INFORMATION
- 10 -
CHAPTER 1: GENERAL INFORMATION
This chapter includes the IK70 Motherboard background information.
1.1 Introduction
Thank you for choosing the IK70 Motherboard. The IK70 Motherboard is powered by
Intel® C236 chipset, 17x17 mm, and Socket G3 Intel® 7th Generation Core i7/i5/i3
Processor. The Intel®7th Generation Core™ processor based on 64-bit, multi-core
processors built on 22-nanometer process technology. The processors are designed for a
two-chip platform consisting of a processor and Platform Controller Hub (PCH) to be
used with the mobile chipset. High performance platform delivers the performance and
high scalability cutting-edge embedded computing application.
In peripheral connectivity, IK70 Motherboard features two NGFF Sockets ,four Serial ATA
III (6Gb/s)connectors, four serial ports (four pin headers), 4 super-speed USB 3.0
connectors and four hi-speed USB 2.0 connectors(four pin headers). Additionally, IK70
SBC features build-in a 12V DC in power adapter.
Abundant I/O connectors and expandability makes IK70 Motherboard to be the right fit
in the majority of industrial computer applications such as machine vision and control,
gaming, POS, KIOSK systems, industrial automation, and others. Powerful processor in
Mini ITX form-factor meets the demanding performance requirements of modern
industrial applications.
1.2 Features
IK70 Motherboard features:
Mini ITX Form Factor (170 x 170 mm)
Intel® 7th Generation Core™ i7/i5/i3 (Kabylake)
Intel® C236 Chipset
Integrated HD Graphics 530 supports DirectX 12 and OpenGL 4.4
2 x DDR4 SO-DIMM, max. 32GB
Integrated Dual Gigabit Ethernet
1 x PCI-E(x16)
4 x SATAIII, 4 x USB3.0, 4 x USB 2.0

USER MANUAL CHAPTER 1 GENERAL INFORMATION
- 11 -
1.3 Motherboard Specifications
Model Name
IK70
System
Specifications
CPU
Socket LGA 1151 Intel® i7/ i5 / i3 processor
Chipset
Intel® C236
System
Memory
2 x SO-DIMM socket ® socket DDR4-1866/2133 ECC
Max. 32GB ( 2 x 16GB DIMMs)
Storage
SATA3 x4
M.2 SATA x 1 (KEY B)
BIOS
UEFI System BIOS
Graphic
Intel® HD Graphics 530
Super IO
Chipset
Fintek F81867
Audio
Realtek ALC283 HD Audio Codec
LAN
2 x Giga LAN (Intel® I211-AIT Gigabit-LAN Controller
+ I219-LM Gigabit-LAN PHY)
USB
4 ports USB 3.0
4 ports USB 2.0 (pin-header)
Display
Specifications
Display
Interface
Supports DirectX 11 and OpenGL 4.0
Analog monitor resolution up to 2048 x 1536 @75Hz
HDMI supports HDMI 1.4, max. resolution
4096 x 2304@24Hz
Display Port: supports DP 1.2, max. resolution
4096 x 2160@60Hz
eDP
I/O Ports
Specification
External I/O
4 x USB 3.0
2 x RJ-45 for Giga LAN with LED
1 x DP 1.2
1 x HDMI 1.4
1 x Audio Jack (Mic-in, Line-out)
1 x (+12V) Power Input 4P terminal block connector
1 x Clear CMOS Button
1 x Reset Button
Internal I/O
2 x RS232 Serial Console to 2x5 Pin Header

USER MANUAL CHAPTER 1 GENERAL INFORMATION
- 12 -
(COM1/COM2)
2 x LVTTL Serial COM Console to 2x5 Pin Header
(COM3/COM4)
SPK R / SPK L
2 x USB 2.0 Pin Wafer
1 x CPU FAN Connector
1 x SYS FAN Connector (Optional in Backplane BD)
1 x LPC DB
4 x SATA III Connectors (SATA0/SATA1/SATA2/SATA3)
12V/5V power connector for SATA (Optional)
2 x SATA Power Connector (on Backplane BD)
1 x Inverter Wafer Connector
1 x LVDS Wafer Connector
1 x eDP Wafer Connector
1 x VR Control Wafer Connector
1 x Panel Button Wafer connector
Expansions
Slot
1 x M.2 NGFF KEY E for WWAN/WALN PCIe Card
1 x M.2 NGFF KEY B for SATA SSD
1 x PCIe (x16) slot
Indicators
LAN (2 x
RJ45)
10/100 Mbps (Green LED)
1000 Mbps (Orange LED)
Traffic LED (Yellow LED)
Security
TPM
TPM 1.2 / NPCT650CAAWX
Mechanical
Specifications
Dimensions
170 (W)x 170(L) mm
Environment
Considerations
Operating
Temp.
-20°C ~ 60°C
Storage
Temp.
-40°C ~ 70°C
Operating
Humidity
10% ~ 95%, non-condensing
Power
Management
Power Input
+12V Power Input
Power
Consumption
Maximum 50W
Packing List
Standard
IK70-100 Single Board Computer
IK70 Manual & Driver CD

USER MANUAL CHAPTER 1 GENERAL INFORMATION
- 13 -
1.4 Functional Description
Function block (V110)

USER MANUAL CHAPTER 1 GENERAL INFORMATION
- 14 -
1.5 Physical Description
Board Dimensions (V110)

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION
- 15 -
HARDWARE INSTALLATION
This chapter provides information on how to use
jumpers and connectors on the IK70 motherboard.
2.1 Motherboard Components
2.2 Memory Module Installation
2.3 I/O Equipment Installation
2.4 Jumper Settings
2.5 Motherboard Connectors

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION
- 16 -
CHAPTER 2: HARDWARE INSTALLATION
This chapter provides information on how to use jumpers and connectors on the IK70
Motherboard. Be cautious while working with these modules. Carefully read the content of
this chapter in order to avoid any damages.
2.1 Motherboard Components
2.1.1 Component Side

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION
- 17 -
2.1.2 I/O Side
2.1.3 Solder Side

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION
- 18 -
2.2 Memory Module (SO-DIMM) Installation
The IK70 SBC Motherboard has two 260-pin SODIMM slot. The socket supports DDR4.
When installing the memory unit, please follow the steps below:
1. Firmly insert the SO-DIMM at an angle of about 30-degree into the slot. Align the
SO-DIMM with the slot until it is fully inserted. The notch on the SO-DIMM should
match the break on the slot.
2. Press downwards on SO-DIMM until the retaining clips at both ends fully snap
closed and the SO-DIMM is properly seated.
CAUTION
The SO-DIMM only fits in one correct orientation. It will cause permanent
damage to the development board and the SO-DIMM if the SO-DIMM is
forced into the slot at the incorrect orientation.

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION
- 19 -
2.3 I/O Equipment Installation
2.3.1 12V DC in
The IK70 Motherboard allows plugging 12V DC-IN jack on the board without another
power module converter under power consumption by Intel® 7th Generation Core i7/i5/i3
Processor and C236 chipset.
2.3.2 Serial COM Port
Four COM Port Pin Headers build in the motherboard. Optional COM ports support
RS-422/485.
*When an optional touch-screen is ordered with PPC, serial com port can connect to a
serial or an optional touch-screen.
2.3.3 HDMI
The Motherboard has one HDMI port that can be connected to an external LCD monitor.
Use HDMI cable to connect to an external LCD monitor, and connect the power cable to
the outlet. The HDMI connector is a standard 19-pin HDMI connector.
2.3.4 Display Port
The Motherboard has one Display Port that can be connected to an external LCD monitor.
Use Display Port cable to connect to an external LCD monitor, and connect the power cable
to the power outlet. The Display Port connector is a standard 20-pin DP connector.
2.3.5 Ethernet Interface
The Motherboard is equipped with Intel® I211-AT Gigabit-LAN Controller + I219-LM
Gigabit-LAN PHY which is fully compliant with the PCI 10/100/1000 Mbps Ethernet
protocol compatible. It is supported by major network operating systems. The Ethernet
ports provide two standard RJ-45 jacks.
2.3.6 USB Port
Eight USB devices (four with pin headers) may be connected to the system though an
adapter cable. Various adapters may come with USB ports. USB usually connect the
external system to the system. The USB ports support hot plug-in connection. Whatever,
you should install the device driver before you use the device.
2.3.7 Audio
The Audio 7.1 channel capabilities are provided by a Realtek ALC283 chipset supporting
digital audio outputs. The audio interface includes two jacks: line-out and mic-in.

USER MANUAL CHAPTER 2 HARDWARE INSTALLATION
- 20 -
2.4 Jumper Settings
This section explains how to set jumpers for correct configuration of the motherboard.
NOTE:
A pair of needle nose pliers may be helpful when working with jumpers.
If you have any doubts about the best hardware configuration for your
application, contact your local distributor or sales representative before
you make any changes. Generally, you simply need a standard cable to
make most connections.
The jumper setting diagram is shown below. When the jumper cap is placed on both pins,
the jumper is SHORT. The illustration below shows a 3-pin jumper; pins 1 and 2 are short. If
you remove the jumper cap, the jumper is OPEN.
PIN 1-2 SHORT
PIN 3 OPEN
CAUTION
To avoid damaging the module, always turn off the power supply
before setting jumpers or clearing CMOS.
Jumpers
Label
Function
Note
JP1
Panel Power Select
2x3 header, pitch 2.0mm
JP2
Backlight Power Select
1x3 header, pitch 2.0mm
JP3
Backlight Dimming Select
1x3 header, pitch 2.0mm
JP4
Backlight Dimming Control
Select
1x3 header, pitch 2.0mm
CLR_CMOS
Clear CMOS
1*3p P:2.0mm DIP 180o
CLR_RTC
Clear RTC
1*3p P:2.0mm DIP 180o