Winmate IP70 User manual

Please read this instructions before operating the device and retain them for future reference.
Mini-ITX SBC
Intel®Pentium®N4200Apollo Lake Processor 1.10 GHz (up to 2.50 GHz with turbo boost technology)
IP70
User Manual
Document Version 1.0
Board Version V100
Document Part No. 91711110101L

2
IP70 Mini-ITX SBC User Manual
Contents
PREFACE ............................................................................................................................................................................4
ABOUT THIS USER MANUAL ..............................................................................................................................................6
CHAPTER 1: GENERAL INFORMATION................................................................................................................................7
1.1 INTRODUCTION ................................................................................................................................................................... 8
1.2 FEATURES........................................................................................................................................................................... 8
1.3 HARDWARE SPECIFICATIONS .................................................................................................................................................. 9
1.4 FUNCTIONAL DESCRIPTION.................................................................................................................................................. 10
1.5 DIMENSIONS .................................................................................................................................................................... 11
CHAPTER 2: HARDWARE INSTALLATION...........................................................................................................................12
2.1 MOTHERBOARD COMPONENTS ............................................................................................................................................ 13
2.1.1 Component Side.................................................................................................................................................... 13
2.1.2 Key Component Location ...................................................................................................................................... 13
2.1.3 Jumper Location ................................................................................................................................................... 14
2.2 MEMORY MODULE (SO-DIMM) INSTALLATION...................................................................................................................... 15
2.3 I/O EQUIPMENT INSTALLATION ............................................................................................................................................ 15
2.3.1 Power Input Jack................................................................................................................................................... 15
2.3.2 Serial COM Port .................................................................................................................................................... 15
2.3.3 HDMI .................................................................................................................................................................... 15
2.3.4 Display Port........................................................................................................................................................... 15
2.3.5 Ethernet Interface................................................................................................................................................. 16
2.3.6 USB Port................................................................................................................................................................ 16
2.3.7 Audio .................................................................................................................................................................... 16
2.4JUMPER SETTINGS ............................................................................................................................................................. 16
2.4.1 Control Backlight Power On/Off ........................................................................................................................... 17
2.4.2 Backlight Brightness Control................................................................................................................................. 17
2.4.3 Control Panel Power ............................................................................................................................................. 18
2.4.4 OSD Option ........................................................................................................................................................... 18
2.4.5 PWM Control ........................................................................................................................................................ 18
2.4.6 CLR CMOS/RTC...................................................................................................................................................... 18
2.5 MAINBOARD CONNECTORS ................................................................................................................................................. 19
2.5.1 Internal Front Side Connectors ............................................................................................................................. 19
CHAPTER 3: INSYDE H20 BIOS SETUP...............................................................................................................................31
3.1 HOW AND WHEN TO USE BIOS SETUP.................................................................................................................................. 32
3.2 BIOS FUNCTIONS.............................................................................................................................................................. 33
3.2.1 Main Menu ........................................................................................................................................................... 33
3.2.2 Advanced .............................................................................................................................................................. 34
3.2.3.Security ................................................................................................................................................................. 50
3.2.4 Power.................................................................................................................................................................... 51

3
Preface
3.2.5 Boot ...................................................................................................................................................................... 54
3.2.6 Exit........................................................................................................................................................................ 55
3.3 USING RECOVERY WIZARD TO RESTORE COMPUTER ................................................................................................................. 57
3.4 HOW TO ENABLE WATCHDOG .............................................................................................................................................. 58
CHAPTER 4: DRIVER INSTALLATION..................................................................................................................................60
4.1 CHIPSET DRIVER................................................................................................................................................................ 61
4.2 GRAPHICS DRIVER ............................................................................................................................................................. 64
4.3 AUDIO DRIVER.................................................................................................................................................................. 67
4.4 LAN DRIVER .................................................................................................................................................................... 69
4.5 TXE DRIVER INSTALLATION.................................................................................................................................................. 72
4.5 WIRELESS BLUETOOTH DRIVER............................................................................................................................................. 75
4.6WATCHDOG DRIVER INSTALLATION............................................................................................................................. 79
4.7 DIGITAL IO DRIVER INSTALLATION............................................................................................................................... 83
CHAPTER 5: TECHNICAL SUPPORT ...................................................................................................................................85
5.1 TECHNICAL SUPPORT.......................................................................................................................................................... 86
5.2DRIVERS .......................................................................................................................................................................... 86
5.3SOFTWARE DEVELOPMENT KIT (SDK).................................................................................................................................... 86

4
IP70 Mini-ITX SBC User Manual
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the prior written permission of the original
manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits and/or software
described or contained in this manual in order to improve design and/or performance. We assume no
responsibility or liability for the use of the described product(s), conveys no license or title under any
patent, copyright, or masks work rights to these products, and makes no representations or warranties
that these products are free from patent, copyright, or mask work right infringement, unless otherwise
specified. Applications that are described in this manual are for illustration purposes only. We make no
representation or warranty that such application will be suitable for the specified use without further
testing or modification.
Warranty
We warrant that each of its products will be free from material and workmanship defects for a period of
one year from the invoice date. (Standard is one year, extended warranty will need to discuss with our
sales representatives. If the customer discovers a defect, we will, at its option, repair or replace the
defective product at no charge to the customer, provided it is returned during the warranty period of one
year, with transportation charges prepaid. The returned product must be properly packaged in its original
packaging to obtain warranty service.
If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be
made according to the shipping date. In the serial numbers the third and fourth two digits give the year of
manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W18Axxxxxxxx means October of year 2018.
Packing List
Before using this Motherboard, please make sure that all the items listed below are present in your
package:
IP70 Mini-ITX SBC
User Manual & Driver CD
If any of these items are missing or damaged, contact your distributor or sales representative
immediately.
Customer Service
We provide a service guide as below for any problem by the following steps: First, contact your
distributor, sales representative, or our customer service center for technical support if you need
additional assistance.

5
Preface
You need to prepare the following information before you call:
Product serial number
Peripheral attachments
Software (OS, version, application software, etc.)
Detailed problem description
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are always
ready to give advice on application requirements or specific information on the installation and operation
of any of our products. Please do not hesitate to call or e-mail us.
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or to alert
you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and
Warnings. The following is an example of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you to know.
Caution
A Caution alert indicates potential damage to hardware and explains how to avoid the
potential problem.
Warning!
An Electrical Shock Warning indicates the potential harm from electrical hazards and
how to avoid the potential problem.
Safety Precautions
Caution
Always ground yourself to remove any static charge before touching the CPU card.
Modern electronic devices are very sensitive to static electric charges. As a safety
precaution, use a grounding wrist strap at all times. Place all electronic components in
a static-dissipative surface or static-shielded bag when they are not in the chassis.
Safety and Warranty
1. Please read these safety instructions carefully.
2. Please keep this user manual for later reference.

6
IP70 Mini-ITX SBC User Manual
3. Please disconnect this equipment from anyAC outlet before cleaning. Do not use liquid or spray
detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily
accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause
damage.
7. Make sure the voltage of the power source is correct before connecting the equipment to the power
outlet.
8. Position the power cord so that people cannot step on it. Do not place anything over the power
cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by
transient over-voltage.
11. If any of the following situations arises, get the equipment checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according to the user’s manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
About This User Manual
This User Manual provides information about using the IP70 Mini-ITX SBC. The documentation set for
the IP70 Mini-ITX SBC provides information for specific user needs, and includes:
IP70 Mini-ITX SBC User Manual –contains detailed description on how to use the
motherboard, its components and features.
Note:
Some pictures in this guide are samples and can differ from actual product.
Document Revision History
Version
Date
Note
1.0
3-Jan-2019
New document release.

7
Chapter 1: General Information
Chapter 1: General Information
This chapter includes the IP70 Mini-ITX SBC background information.
1.1 Introduction
1.2 Features
1.3 MotherboardSpecifications
1.4 Functional Description
1.5 Physical Description

8
IP70 Mini-ITX SBC User Manual
1.1 Introduction
Thank you for choosing the IP70 Mini-ITX SBC. The IP70 Mini-ITX SBC is powered by Intel ® Pentium®
N4200 Apollo Lake processor 1.10 GHz; up to 2.50 GHz with turbo boost technology and Intel® SOC
chipset. The IP70 Mini-ITX SBC supports up to 8 GB of DDR3L 1866 MHz SO-DIMM system memory.
High performance platform delivers the performance and high scalability cutting-edge embedded
computing application.
In terms of peripheral connectivity, the IP70 Mini-ITX SBC has four serial ports (pin headers), four
super-speed USB 3.0 connectors and four hi-speed USB 2.0 connectors ( four pin headers). , IP70
Mini-ITX SBC supports expansion with two M.2 Slots, PCIE2.0. Designed for industrial applications, the
IP70 Mini-ITX SBC supports 12V DC power input and operates in a wide temperature range -20°C ~
60°C.
Abundant I/O connectors and expandability makes IP70 Mini-ITX SBC to be the right fit in the majority of
industrial and commercial applications such as machine vision and control, gaming, POS, KIOSK
systems, industrial automation, and others. Powerful processor in a Mini-ITX form factor meets the
demanding performance requirements of modern Industrial IoT and Edge Computing applications.
1.2 Features
IP70 Mini-ITX SBC features:
Mini ITX Form Factor (170 x 170 mm)
Intel ® Pentium® N4200 Apollo Lake Processor 1.10 GHz, up to 2.50 GHz with turbo boost
Intel® SOC Chipset
Intel® HD Graphics 505, supports DirectX 12 and OpenGL4.3
2 × DDR3L 1866 MHz SO-DIMM ( up to 8 GB)
Intel I210AT Gigabit-LAN Controller + I219LM Gigabit-LAN PHY
1 x M.2 Slot (for SSD), 1 x M.2 Slot (for Wi-Fi)
1 x PCIE2.0 (x1) slot (Optional)
Operating temperature -20°C ~ 60°C

9
Chapter 1: General Information
1.3 Hardware Specifications
Model Name
IP70 Mini-ITX SBC
System Specifications
CPU
Intel® Pentium® N4200 Apollo Lake Processor 1.10 GHz,
up to 2.50 GHz with turbo boost technology
Chipset
Intel® SOC
System Memory
2 × DDR3L 1866 MHz SO-DIMM ( max. 8GB )
BIOS
Insyde BIOS
Graphic
Intel® HD Graphics 505, supports DirectX 12 and OpenGL4.3
Audio Codec
Realtek HD codec
Ethernet
Intel® I210AT Gigabit-LAN Controller + I219LM Gigabit-LAN PHY
Display Specifications
Display Interface
HDMI resolution up to 3840 x 2160 @ 30 Hz
DP interface, supports max. resolution 4096 x 2160 @60Hz
LVD S24 bit 1920 x 1200@60Hz
I/O Ports Specification
External I/O
4 x USB 3.0
2 x RJ-45 for Giga LAN
1 x DP 1.2
1 x HDMI 1.4b
1 x Audio Jack (Mic-in, Line-out)
1 x (+12V) DC-in Power Jack
1 x Clear CMOS Button
1 x Reset Button
Internal I/O
3 x RS-232 2x5 pin-header
1 x RS-232/422/485 2x5 pin-header
4 x USB 2.0
1 x LVDS by DF-13 40 pin connector
2 x SATAIII (SATA2 is only available when M.2 SATAis not in use;
SATA2 and M.2 SATA cannot be used concurrently.)
1 x SATApower by 2x4 pin wafer
2 x -pin-header for speaker(with Amplifier): Left, Right
1 x 14-pin pin-header for DIO
1 x 3-pin digital panel backlight brightness controller
1 x 7-pin inverter
1 x 2x2-pin DC-in 12V connector
2 x 2-pin wafer for +5V external power (Red)
1 x 2-pin wafer for 12V external power (Yellow)
1 x OSD membrane control
1 x eDP panel by JAE-FI-X30S-HF 30p connector (Optional)
1 x 10-pin wafer for VGA output(Optional)

10
IP70 Mini-ITX SBC User Manual
Model Name
IP70 Mini-ITX SBC
Expansions Slot
1 x M.2 Slot (for SSD)
1 x M.2 Slot (for Wi-Fi)
1 x PCIE2.0 (x1) slot (Optional)
Mechanical Specifications
Dimensions
170 x 170 mm
Operating Temperature
-20°C ~ 60°C
Storage Temperature
-40°C ~ 70°C
Operating Humidity
10% ~ 95%, non-condensing
Power Management
Power Input
+12V DC
Packing List
Standard
IP70 Single Board Computer
IP70 Manual & Driver DVD
1.4 Functional Description
Function block (V100)