Wiseup WIFI35 User manual

1/ 144
User Manual
Model Number: WIFI35
(Android Version)
I. Product Overview
7. Flashlight
8. Micro SD Card Slot
9. Blue Indicator Light
10. Red Indicator Light
11. Reset Button
1. Power Button
2. Power Output
3. Power Input
4. Battery Life Indicator Lights
5. Battery Check Button
6. Camera Lens

2/ 144
II. What's in the Package?
-1× Power Bank WIFI Camera
-1× USB Cable
-1×DC5V 2A Charger Adapter
-1× 16GB Micro SD Card (fitted into the Micro SD card slot already)
III. Get the Camera Ready
3.1 Make sure that a micro SD card is formatted and has been inserted into the SD card slot of the
camera. The internal memory of this memory card cannot exceed 64GB and we suggest you to use a
micro SDHC class 10 memory card.
3.2 Connect the camera to an external power source, the battery life indicator lights will keep flashing,
then hold down the power button for 2 seconds to turn on the camera.

3/ 144
<Note>: the camera battery is for back up use when external power is down. We suggest you to keep
the camera connected to the external battery for the best performance.
IV. P2P Connection Setup (LAN Mode)
4.1 Hold down the power button for 2 seconds to turn on the camera. When the red indicator light stay
illuminated and the blue indicator light starts flashing slowly, indicating that the camera's wifi signal is
ready.

4/ 144
4.2 Search for "HDMiniCam" on the APP store and install the APP on your mobile device.
4.3 Open the WLAN settings page of your mobile device, connect your mobile device to the camera's
WIFI hotspot.
4.4 Run the APP "HDMinicam".

5/ 144
4.5 Add the camera to the APP "HDMinicam" by one of the following methods.
Option 1:

6/ 144
Option 2 : Input the camera ID and tap "OK" , no password is needed.

7/ 144
4.6 If the camera shows “Online” on the app page, it means that the camera’s P2P (LAN) connection
is successful, and the camera has entered into LAN mode.

8/ 144
4.7 Click the camera icon to enter into the live video page.
V. Remote View Configuration (WAN Mode)
5.1 Run the app " HDMinicam ",make sure that the camera has been added to the app and it is online
in the P2P mode.

9/ 144
5.2 Tap the setting icon on the app.
5.3 Tap the "Advance Config " .

10 / 144
5.4 Tap the “WIFI Config”, and select an available WIFI hotspot to enroll the camera in, then tap “Ok”
to complete the remote view setup and the camera will reboot automatically.
5.5 Exit the APP "HDMiniCam".

11 / 144
5.6 Return to the WLAN settings page on your mobile device and disconnect the camera from
the current WIFI network.

12 / 144
5.7 Enroll your mobile device in another wifi network, or enable your mobile data network connection.

13 / 144
Option 1:
Option 2:
5.8 Run the APP "HDMiniCam" again, if you see the live video on your mobile device, that means the

14 / 144
remote view setup is succeed.
<Note>: If the camera status is "Connect Fail", indicating that the remote view setup is failed, please set up again.
VI. Motion Detection Setup
6.1 Run the app "HDMiniCam" and make sure that the camera has been added to the app
successfully and it is online.

15 / 144
6.2 Tap the setting icon on the app, then select "Advance Config" and "Alarm Config".

16 / 144
6.3 Set the alarm details by following the steps below, then tap "OK" to save the setting.
<Note>: The motion detection video resolution is 1920x1080P and the video format is AVI.
VII. Record Video to the Local Memory Card
7.1 Run the app "HDMiniCam" and make sure that the camera has been added to the app
successfully and it is online.

17 / 144
7.2 Tap the setting icon on the app, then select "Advanced Config" and " SDCard Record Config"
7.3 Set video recording as below, then tap " OK " to save the setting. The camera will start recording

18 / 144
automatically and all the video files will be saved to the local memory card.
VIII. Record Video to the Mobile Device
8.1 Run the app "HDMiniCam" and make sure that the camera has been added to the app
successfully and it is online.

19 / 144
8.2 Tap the camera.
8.3 Tap the video recording button to start or stop video recording.

20 / 144
8.4 Tap the audio record button to enable or disable the audio recording.
8. 5 All the video files will be saved to the mobile device and you can play the video by following the
steps below.