WLO Wood Lakota Solid Series User manual

-Wash with short program with a little detergent.
-Briefly tighten at low speed.
-Do not dry in the dryer and exposed to the sun.
SAFETY PRECAUTIONS
-If your pet break down a certain part of the product, stop the use of the product and supply spare parts.
-Always observe your pet.
-Periodically wash the cushion of the product in accordance with the washing instructions.
-Do not sit on the product and do not place any heavy objects or other goods of your product.
-During the assembly, since the screws screw into the wood for the first time the process will require
significant force. It is advised to ask for help or use power tools.
CUSHION & TENT WASHING INSTRUCTIONS
Follow us on social media for
upcoming products!
We are always with you!
Please write a message for any help!
Customer Whatsapp Service 24/7
[phone]
www.wlowood.com
[email protected]
www.instagram.com/wlo_wood/

Attention:
Do not assemble
the product on
hard surfaces to
avoid damage

Step 2
Attention: Place the seams facing you
Pull the red ropes and insert the back tent.
Remove red ropes afterwards.
Tighten all "M" parts
to "R" parts with hand
(Lock with using the
allen key from bottom)
Attention: Tighten X2 less
"M" parts for small size
Push it
to the
bottom
Step 1
Screw following numbers of
"R" parts together
Attention: Tighten X2 extra screws for
Medium, Large and X-Large size

Attention: Tighten X2 less
screws for small size
Combine "F" parts and
tighten all screws
Step 4
Tighten as shown
above
Attention: Tighten X2 less "M" parts for
small size
Repeat Step 1 with "F" parts but do not
tighten screws fully
Step 3

Step 6
Shake cushion to swell
after removing from
the vacuum bag!
Put the cushion inside
Step 5
Ironing is recommended before installation
Install tent carefully

CONGRATULATIONS!
Ready to use