WN.RF FMT5.0 User manual

FMT5.0
I
nitial preparation work:
First set up the antenna cable
port, then plug the power cord into the transmit
inser
t the audio cable to the XLR
divided into two channels. Connection is complete, please turn on the
transmitter panel POWER button, the device starts.
Transmitter boot interface

Model / equipment name / manufacturer information
 The transmitter
starts
Transmitter boot.
The progress bar e
the knob to select, short press the knob to confirm.
FMT5.0
User M
anual
nitial preparation work:
First set up the antenna cable
and connect it to the transmitter's RFOUT
port, then plug the power cord into the transmitter's power outlet. Next,
t the audio cable to the XLR
header or RCA outlet
, the outlet is
divided into two channels. Connection is complete, please turn on the
transmitter panel POWER button, the device starts.
Transmitter boot interface
Model / equipment name / manufacturer information
starts
default configuration
The progress bar e
nters the selected setting in
about 10 seconds. Turn
the knob to select, short press the knob to confirm.
anual
and connect it to the transmitter's RFOUT
ter's power outlet. Next,
, the outlet is
divided into two channels. Connection is complete, please turn on the
about 10 seconds. Turn

Last config
Last configuration,
Default config
default configuration, the system default frequency 98MHZ / power OW /
stereo + external modulation / audio pre
 PLL lock wait
Waiting time about 2-
10 seconds.
 Main interface
F: Current frequency POW:
Current power
DRIVE: Amplifier Push
TEMP:
level
Short press the knob to enter the menu settings, turn the knob to s
menu.

Menu 1 frequency setting
Short press the knob to enter the frequency setting.
Current frequency:
current frequency
Frequency setting:
Set the frequency
Turn the knob to adjust the frequency setting, short press the knob to confirm the frequency
setting.
Last configuration,
the latest shutdown configuration.
default configuration, the system default frequency 98MHZ / power OW /
stereo + external modulation / audio pre
-emphasis 0 / volume gain 0dB.
10 seconds.
Current power
VSWR: Standing wave ratio L
Left channel level
TEMP:
Amplifier Temperature MOD
Modulation Level
Short press the knob to enter the menu settings, turn the knob to select the desired setting
Menu 1 frequency setting
Short press the knob to enter the frequency setting.
current frequency
Set the frequency
Turn the knob to adjust the frequency setting, short press the knob to confirm the frequency
default configuration, the system default frequency 98MHZ / power OW /
Left channel level
Modulation Level
R Right channel
elect the desired setting
Turn the knob to adjust the frequency setting, short press the knob to confirm the frequency

The PLL locks
again for each frequency setting. After the lock is completed, return to menu 1
frequency setting.

Menu 2 power settings
Short press the knob to enter the power setting.
Current RF power:
Current RF power
RF power setting: RF
power setting
Turn the knob to adjust the power setting, press the knob to confirm the power setting. And
return to menu 2 power settings.
 M
enu 3 signal modulation settings
Short press the knob to enter the signal modulation setting.
again for each frequency setting. After the lock is completed, return to menu 1
Menu 2 power settings
Short press the knob to enter the power setting.
Current RF power
Drive: Amplifier push
power setting
VSWR: VSWR
Turn the knob to adjust the power setting, press the knob to confirm the power setting. And
return to menu 2 power settings.
enu 3 signal modulation settings
Short press the knob to enter the signal modulation setting.
again for each frequency setting. After the lock is completed, return to menu 1
Turn the knob to adjust the power setting, press the knob to confirm the power setting. And

Current signal mode:
Current signal mode
Signal mode setting:
Signal mode setting
STEREO + EXT MOD Stereo + External Modulation Input
MONO + EXT MOD Mono + External Modulation Input
EXT MOD External Modulation Input
STEREO Stereo Input
Turn the knob to
adjust the signal mode setting, short press the knob to confirm the signal
mode setting. And return to menu 3 signal mode setting.
Menu 4 audio pre-
emphasis settings
Short press the knob to enter the short press knob to enter the signal modulation setti
Current pre-emphasis
: The current pre
Pre-emphasis setting: Pre-
emphasis setting
Current signal mode
Signal mode setting
STEREO + EXT MOD Stereo + External Modulation Input
MONO + EXT MOD Mono + External Modulation Input
EXT MOD External Modulation Input
adjust the signal mode setting, short press the knob to confirm the signal
mode setting. And return to menu 3 signal mode setting.
emphasis settings
Short press the knob to enter the short press knob to enter the signal modulation setti
: The current pre
-emphasis
emphasis setting
adjust the signal mode setting, short press the knob to confirm the signal
Short press the knob to enter the short press knob to enter the signal modulation setti
ng.

Turn the knob to adjust the audio pre
confirm the audio pre-
emphasis setting. And return to menu 4 Audio Pre
Settings.

Menu 5 Audio Gain Setting
Short press the knob to enter the audio gain setting.
Left + Right
Left channel +
Left Left channel
Right Right channel
Turn the knob to select the audio channel setting, short press the knob to confirm the
audio channel setting.
Turn the knob to adjust the audio channel gain in real time.
try adjusting the L and R levels to full without OVER. If
to MUTE. Short press the knob to exit the audio gain setting. And return to menu 5
audio gain setting.

Menu 6 External Modulation Gain Setting
Short press the knob to set the external modulation gain.
Turn the knob to adjust the audio pre
-
emphasis setting, short press the knob to
emphasis setting. And return to menu 4 Audio Pre
Menu 5 Audio Gain Setting
Short press the knob to enter the audio gain setting.
Left channel +
Right channel
Turn the knob to select the audio channel setting, short press the knob to confirm the
Turn the knob to adjust the audio channel gain in real time. For best sound
try adjusting the L and R levels to full without OVER. If
you want to set mute, adjust
to MUTE. Short press the knob to exit the audio gain setting. And return to menu 5
Menu 6 External Modulation Gain Setting
Short press the knob to set the external modulation gain.
emphasis setting, short press the knob to
emphasis setting. And return to menu 4 Audio Pre
-emphasis
Turn the knob to select the audio channel setting, short press the knob to confirm the
For best sound
quality,
you want to set mute, adjust
to MUTE. Short press the knob to exit the audio gain setting. And return to menu 5

Turn the knob to adj
ust the external modulation gain in real time. If you want to set
mute, adjust to MUTE. Short press the knob to exit the external modulation gain
setting. And return to Menu 6 External Modulation Gain Setting.

Menu 7 network settings
Network option dete
cted not installed. Short press the knob to exit.
 Menu 8 exit
the menu
Short press the knob to exit the menu and return to the main interface.
 System sleep
Long press the knob in the main menu page to sleep the system, short press the
knob to exit the
system hibernation.

System alarm prompts
Warning: V.S.W.R standing wave high! Please check the antenna and cable
connection.
ust the external modulation gain in real time. If you want to set
mute, adjust to MUTE. Short press the knob to exit the external modulation gain
setting. And return to Menu 6 External Modulation Gain Setting.
Menu 7 network settings
cted not installed. Short press the knob to exit.
the menu
Short press the knob to exit the menu and return to the main interface.
Long press the knob in the main menu page to sleep the system, short press the
system hibernation.
System alarm prompts
Warning: V.S.W.R standing wave high! Please check the antenna and cable
ust the external modulation gain in real time. If you want to set
mute, adjust to MUTE. Short press the knob to exit the external modulation gain
Short press the knob to exit the menu and return to the main interface.
Long press the knob in the main menu page to sleep the system, short press the
Warning: V.S.W.R standing wave high! Please check the antenna and cable

Warning: the temperature inside the machine is high! (More than 70
the room clean and does not exceed 40
Warning: the temperature inside the machine is high! (More than 70 ℃
the room clean and does not exceed 40
℃.
℃
) Please keep