Wolf BIVVI LIGHT LPB-260 User manual

Note
1. The full charging time is only for your reference,
please refer to actual operation.
2. High quality guarantee, using A-grade Li-ion battery
cell for this Powerbank , please be assured use.
3. Please using the matched charging cable according
to your mobile phone and digital product.
4. It will cause slight heating due to electric
consumption when charging and discharging, it’s
normal phenomenon.
5. Please store this Powerbank in a cool and dry place,
if do not use for a long period, please fully charged
this Powerbank at every 6 months interval.
6. Please find our suggestion to choosing regular 5V-2A
charger to charge this charger, in order to ensure the
stability of this product usage.
7. Please do not put together this Powerbank with
metal or tool items, in order to avoid scratching
surface or damage.
WARNING
• DO NOT attempt to open or dismantle the product.
• DO NOT subject the Powerbank to naked flames
or extreme heat.
• DO NOT stand on or otherwise apply pressure to
the Powerbank.
• DO NOT allow children to play with the
Powerbank.
Whilst the device will charge in high temperatures
please ensure the device never sits in direct
sunlight for a prolonged period of time as the
charger has a maximum temperature of 45°C
(113 °F ).
• Stop using this Powerbank if it occur expansion or
break down, and contact local distributor.
LPB-260
BIVVI LIGHT
POWERBANK
ENGLISH
Thank you for purchasing this LPB-260
Bivvi Light / Powerbank. Please read the
manual carefully before use, and keep it for
reference in the future.
5. 4 LED indicators , first indicate 0~25%, second, 2
lighting LEDs indicate 25-50% capacity, 3 lighting
LEDs indicate 50-75% capacity, 4 lighting LEDs
indicate 75-100% capacity. LED indicators will
remain on and stop flashing when Powerbank is
fully charged.
Charging
Status/LED
indicators
0%
~25%
25%
~50%
50%
~75%
75%
~99% 100%
1st LED
Indicator
Flashing
Blue
Solid
Blue
Solid
Blue
Solid
Blue
Solid
Blue
2nd LED
Indicator OFF Flashing Blue
Solid
Blue
Solid
Blue
Solid
Blue
3rd LED
Indicator OFF OFF Flashing Blue
Solid
Blue
Solid
Blue
4th LED
Indicator OFF OFF OFF Flashing Blue
Solid
Blue
For language translations of LPB-260
Bivvi Light Powerbank instructions
visit www.wolnt.co.uk
WOLF INTERNATIONAL LTD
Suite 1, 284 Warley Hill, Great Warley,
Brentwood, Essex CM13 3AB
E: [email protected] IT: [phone]
E: [email protected]
www.wolnt.co.uk
Product Code: WFPT003

Product Features:
•IP66: Rainproof, dustproof, shockproof, designed
for outdoor sport use. It will be very helpful when
travelling, climbing, swimming, bicycling.
• 2600mAh capacity: 4 blue indicators for power
status.
• USB Output*1; Micro lnput*1.
• There are two magnets on the top of product, and
one magnet on the top and bottom side. Please
pay attention to the magnet mark when using.
• Safe Use: Short circuit protection, over-discharging
protection and over-charging protection are
designed in PCBA.
• Bright LED torch, on the side with 10 white LEDs and
8 red LEDs.
• Front and back side with silicone protection.
• Button with multifunction operation.
1. USB Output: DC 5V 2A Max
2. Micro Input: DC 5V 2A Max
3. 4 indicators for power status
4. 10 white LEDs and 4 red LEDs
5. Button with multifunction operation
6. Magnet placement
7. Magnet placement
8. 30 meter long distance torch
9. PC semitransparent tube
10. Shockproof silicone cover
11. Plastic cement
Accessory List:
User Manual
Charging Cable
LPB-260 Bivvi Light/Flashlight/Powerbank
Specications:
Capacity 2600mAh
Micro Input DC 5V 2A Max
USB Output DC 5V 2A Max
Product Size 133.5*35*35 / mm
Product Net Weight 116.0/g
Full Charging Time 2 hours
Operation Temperature 0~45(ºC)
Battery Type 18650
Flashlight 1W
Side LED Light: White 0,5W*10
Side LED Light: Red 0,5W*4
Operating instructions:
1. Connect the charger by provided cable of USB-A
port and connect your Powerbank the end of
cable for charging the Powerbank. Please kindly
choose the charger which voltage between
5.0V-5.5V.
2. Charging device: Open the cap of the Micro
Input, connect the USB-A end to one of the
output ports on the Powerbank. Powerbank will
charge your device automatically once the
cable is connected. The Powerbank will shut off in
32 seconds when no device is being connected.
3. Charging Powerbank: Open the cap of the
USB Output, connect the larger end of the the
USB cable provided to your PC or (a USB power
adapter not provided) and the Micro USB end to
Powerbank. (Notice: For charging Powerbank, it
doesn’t support charging and discharging at the
same time).
4. Button operation: Press once to check battery
status;
Side LED lights: Double press button to turn on LED
in white light (Long press the button to adjust the
brightness). Press again to turn on LED in red light
(Long press the button to adjust the brightness).
Press once again to white light strobe, twice
press to red light strobe, and again white and red
light strobe by turns. Press once to turn off LED (In
strobe status, press button for 3 seconds also can
turn off LED).
Flashlight: when side light off, press the button
for 3 seconds to turn on flashlight, press again to
strobe, once again to SOS, to turn off flashlight,
press once or for 3 seconds