Wolf SPB-24 User manual

Operating Instructions
To collect and store solar power to the Solar Charger’s
internal battery:
• Place the Solar Charger in direct sunlight: make sure the
embedded solar panel is positioned towards the sun.
• LED indicator light glow solid green while charging by
the sunlight.
Note: The solar panel is designed for emergency charging.
It should not be the primary source of charging. Prolonged
exposure under the burning sun will cause damage to the
solar panel.
Charging the Solar Charger from an external
power source:
• Plug in the included USB cable to a power source
such as an AC power adapter or any other USB power
source (i.e. Computer).
• The POWERBANK will shut off in about 30 seconds when
no device is connected.
• Battery's charging status is indicated by 4 LED light
indicators in the following manner:
Charging
Status/LED
indicators
0%
~25%
25%
~50%
50%
~75%
75%
~99% 100%
1st LED
Indicator
Flashing
Blue
Solid
Blue
Solid
Blue
Solid
Blue
Solid
Blue
2nd LED
Indicator OFF Flashing Blue
Solid
Blue
Solid
Blue
Solid
Blue
3rd LED
Indicator OFF OFF Flashing Blue
Solid
Blue
Solid
Blue
4th LED
Indicator OFF OFF OFF Flashing Blue
Solid
Blue
9. Please do not put together this POWERBANK with metal
or tool items, in order to avoid scratching surface or
damage.
10. Don’t leave this item out in your car to charge. A cars
dashboard will become very hot from the sun and
would ruin the internal battery.
Applicable Devices:
Output
Connector
Output
Current
Applicable
Devices
USB / Type-C Type-C
output:
5V 3A
USB output:
5V 3A
Samsung Sony Nokia HTC
and any other brand smart
phones, and iPhone...
iPad... iPod series Apple
devices or devices that
need SV O.S~lA input
Accessory List:
SPB-24 SOLAR POWERBANK, Micro USB Cable, User
Manual, Carabiner, Wolf 4 in 1 Cable & Tech Case.
Product Diagrams
1. Monocrystalline
Solar Panel
2. QC 3.0 Output
3. USB Output Port A
4. Micro USB
Input Port
5. Type - C port
6. LED Indicators
7. Power Switch
8. Carabiner hole
9. LED Flashlight
10. Solar charging
indicator
11. Wireless charging
Specications:
Capacity 24000mAh
Solar Panel 5V-300mA
Micro USB Input 5V 2A 9V 2A 12V 1.5A
Type-C Input PD 5V 2A 9V 2A 12V 1.5A
QC 3.0 Output 5V 3A 9V 2A 12V 1.5A
Output USB-A1 5V 3A 9V 2A 12V 1.5A Max
Output USB-A2 5V 3A 9V 2A 12V 1.5A Max
Type-C Output PD 5V 2.4A 9V 2A 12V 1.5A
Wireless Output 5W / 7.5W / 10W
Size 180*89*30mm
Product net weight 553(g)
Battery type Li-polymer
Operation temperature 0~45ºC
Flashlight 1W*1
POWERBANK fully charged time: via Type-C port 11~12 hrs;
via Micro 14~15 hrs; via Type-C & Micro 7~8 hrs.
Note:
1. The full charging time is only for your reference, please
refer to actual operation.
2. Due to the exchange rate of POWERBANK, the actual
capacity is not equal to chargeable capacity.
3. Specification and external form of this POWERBANK may
change anytime due to product improvement and
upgrade.
4. High quality guarantee, using A-grade Li-polymer
battery cell for this POWERBANK, please be assured use.
5. Please using the matched charging cable according to
your mobile phone and digital product.
6. It will cause slight heating due to electric consumption
when charging and discharging, this is normal.
7. Please store this POWERBANK in a cool and dry place,
if do not use for a long period, please fully charge this
POWERBANK at every 6 months interval.
8. Please find our suggestion to choosing regular 5V-2A
charger to charge this solar charger, in order to ensure
the stability of this product usage.
ENGLISH
SPB-24 SOLAR WIRELESS
POWERBANK MANUAL
24000mAh IP67 Waterproof Solar Wireless POWERBANK with Type-C & QC3.0

ipad
charging
Samsung GALAXY Series charging
(Note: some models of Samsung need to use
external connector)
Wireless
charging
Troubleshooting:
If the following notes do not help please stop using this
product and contact distributor or service centre.
When Charging
Problem Reason Operation
Charging
indicators are
not very bright.
Using improper
adapter to
charge.
Please use advised
adapter by original
factory.
Poor contact for
Micro USB input
port/ USB output
port.
Please re-detect
whether Micro USB input
port or USB output port
has good contact.
Using improper
USB charging
cable.
Please use original data
charge cable.
Charging the POWERBANK from an external
power source
DC 5V/2A Adaptor Connect AC (l00-220V)
Micro USB cable
Please use Micro USB cable to charge this
POWERBANK
When Using
Problem Reason Operation
Indicators
still on after
disconnecting
adapter
or load
equipment.
This is normal,
it takes some
buffer time for
indicators to
turn off.
It will turn off
automatically after
15 seconds.
Short using
time.
Battery life will
end.
If there is still no power
after charging the
battery life has ended.
WARNING
•DO NOT place this POWERBANK in sunlight when the 4th LED
indicator is on.
•DO NOT attempt to open or dismantle the Solar Charger.
•DO NOT subject the Solar Charger any violent shock.
•DO NOT subject the Solar Charger to naked flames or
extreme heat.
•DO NOT stand on or otherwise apply pressure to the Solar
Charger.
•DO NOT allow children to play with the Solar Charger.
•Whilst the device will charge in high temperatures please
ensure the device never sits in direct sunlight for a prolonged
period of time as the charger has a maximum temperature
of 45°C(113°F).
•Stop using this solar charger if it expands or breaks down,
and contact your distributor.
NOTE:
•POWERBANK can charge 2 devices simultaneously by QC
output and USB output, except Type-C.
•POWERBANK can be charged by Type-C and input at the
same time.
Charging other devices:
Press the power button to turn the charger on.
•Use the original cable that came with your device. Connect
the USB-A/Type-C end to one of the USB ports on the
POWERBANK, the device will start charging.
Note: When the Solar Charger is in use and the capacity is less
than 2%, the Solar Charger will automatically shut off to avoid
over discharge of the battery.
For charging POWERBANK, it doesn’t support charging and
discharging at the same time, Micro and Type-C cannot
charge devices at the same time. You can charge the device
by USB-A and QC 3.0, but cannot charge the device by USB-A
and Type-C/QC 3.0 and Type-C.
Operating the Emergency LED Flashlight:
•To turn on the Emergency LED flashlight: Press the power
button 3 seconds for emergency torch.
•Press again shift to caution light
•Press once again shift to SOS
•Long press the button to turn off LED light
iphone
charging
Charging other devices: