Wolf WWD30 User manual

30" Warming Draw r
Th sup rior air control of th Wolf
warming draw r h lps k p moist foods
moist and crisp foods crisp. Stainl ss
st l and black glass draw r fronts match
th look of our built-in ov ns and rang s,
and th int grat d draw r front allows for
a custom wood pan l. El ctronic controls
ar hidd n so th unit int grat s with
surrounding cabin try.
FEATURES
•Can be installed in a standard or flush
inset application.
•Approved for warming towels.
•Crafted of heavy-duty stainless steel.
•Hidden electronic touch controls for sleek
appearance.
•Temperature control range of 80°F to
200°F.
•Four preset temperatures: high 200°F,
medium 160°F, low 120°F and proof 85°F.
•Programmable automatic shutoff up to
four hours.
•Fan assist for even heat distribution.
•Fast preheat times.
•Rack for stacking food.
•Three ball-bearing drawer glides for
smooth, full extension.
•Removable stainless steel drawer for
easy cleaning.
ACCESSORIES
•tainless steel drawer fronts to match
style of Wolf ovens and ranges.
•2" thick stainless steel drawer fronts for
installation below sealed burner rangetop.
•Integrated drawer front for custom
wood applications—panel can exceed
30" width.
•ix-piece container set with lids.
•tainless steel tubular and pro handles.
Accessories are avai ab e through your authorized
Wo f dea er. For oca dea er information, visit the
find a showroom section of our website,
wo fapp iance.com.
DRAWER FRONT OPTIONS HANDLE
L eries Tubular
E eries Framed and Unframed Tubular
E eries Black Glass Unframed Tubular
E eries 1" and 2" Thick Pro
E eries 2" Thick/36" Wide Pro
Integrated Custom
Mode WWD30 is so d as a base unit on y. A drawer front pane is required. Pane s are avai ab e through
your authorized Wo f dea er. Stain ess stee drawer front pane s inc ude a hand e to match bui t-in ovens
and ranges. Integrated drawer front a ows for a custom wood pane and hand e hardware.
Accessory container set.
L Series Drawer Front
E Series Drawer Front
with Pro Hand e
E Series Drawer Front
with Tubu ar Hand e
Mode WWD30 shown with L series drawer front.
This appliance is certified by tar-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Integrated Drawer Front

SPECIFICATIONS
Interior Capacity 1.6 cu ft
Interior Dimensions 25" W x 6" H x 18" D
Integrated Panel Thickness (min) 5/8"
Integrated Panel Weight (max) 25 lbs
Heating Element 850 W
Electrical Requirements 120 V AC, 60 Hz
15 or 20 amp circuit
Power Cord 3' cord with grounded plug
hipping Weight 100 lbs
STAINLESS STEEL DRAWER FRONT
L SERIES AB
Tubular Handle 7/8"3
1/2
E SERIES AB
Tubular Handle 11/8"3
1/2"
Pro Handle 11/8"3
1/2"
Pro Handle (2" thick) 21/8"41/2"
BLACK GLASS DRAWER FRONT
E SERIES AB
Tubular Handle 11/8"3
1/2"
INTEGRATED DRAWER FRONT
CUSTOM PANEL WHD
Typical 297/8"10
3/8"3/4"
INSTALLATION SPECIFICATIONS
tandard Installation – L eries, E eries and Integrated Drawer Front
OVERALL DIMENSIONS
30" Warming Draw r
Dimensions in parentheses are in
mi imeters un ess otherwise specified.
ANTI-TIP BLOCK
DIMENSION
WILL VARY*
*Dimension must accommodate height of anti-tip block and drawer face overlap.
NOTE: Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit.
FRONT VIEWSIDE VIEW
E
24" (610) min
CABINET DEPTH
285/8" (727)
OPENING WIDTH
PLATFORM
91/8" (232)
OPENING HEIGHT 103/8"
(264)
231/2"
(597)
TYPICAL
36" (914)
FLOOR TO
COUNTERTOP
Flush Inset Installation – E eries and Integrated Drawer Front
DIMENSION
WILL VARY*
231/2"
(597)
TYPICAL
*Dimension must accommodate height of anti-tip block and drawer face overlap.
NOTE: Dimensions provided allow for 1/4" (6) reveal for proper air flow. Location of electrical supply within opening may require additional
cabinet depth. Dashed line represents profile of unit.
FRONT VIEWSIDE VIEW
303/8"(772)
FLUSH INSET WIDTH
285/8" (727)
OPENING WIDTH
7/8" (22) PLATFORM
7/8" (22) TOP AND SIDE CLEATS
36" (914)
FLOOR TO
COUNTERTOP
107/8" (276)
FLUSH INSET
HEIGHT
91/8" (232)
OPENING HEIGHT E
E
SIDE CLEATS
24 (610) min
FLUSH INSET
DEPTH
1" (25)
TOP VIEW
ANTI-TIP BLOCK
©Wo f App iance, Inc. a rights reserved. Features and specifications are subject to change at any time without notice. 10/11
223/4" (578)
281/4" (718)
9"
(229)
103/8"
(264)
211/2"
(546)
3/4"
(19)
3/4" (19)
A
B
B
297/8"(759)
OR 357/8" (911)
Dimensions may vary by ± 1/8".