woodmizer LT10S3 E7,5S User manual

Table of Contents Section-Page
Table of Contents SW-07doc0801131

Wood-Mizer®
Sawmill
Safety, Setup, Operation
& Maintenance Manual
LT10S3 E7,5S rev. A5.00
Safety is our #1 concern! Read and understand
all safety information and instructions before oper-
ating, setting up or maintaining this machine.
December 2006
Form #794
!
This is the original language
for the manual.

2 SW-07doc080113Table of Contents
Table of Contents Section-Page
General Contact Information
Branches & Authorized Sales Centers
SECTION 1 SAFETY 1-1
1.1 Safety Symbols.......................................................................................1-1
1.2 Blade Handling.......................................................................................1-2
1.3 Sawmill Setup.........................................................................................1-2
1.4 Sawmill Operation..................................................................................1-2
1.5 Sawmill Maintenance.............................................................................1-4
1.6 Belt Sizes................................................................................................1-8
1.7 Blade Sizes .............................................................................................1-9
1.8 Cutting Capacity.....................................................................................1-9
1.9 Engine/Motor Specifications..................................................................1-9
1.10 Noise Level...........................................................................................1-10
1.11 Sawdust Extractor Specifications.........................................................1-10
1.12 Overall Dimensions..............................................................................1-11
1.13 Components..........................................................................................1-12
SECTION 2 SAWMILL ASSEMBLY 2-1
2.1 Mounting Parts of LT10 Sawmills with Electric Motors.......................2-1
Parts Specifications
Specifications of Fasteners
Tools Necessary for Assembling the Sawmill
2.2 Unpacking the Sawmill ..........................................................................2-5
2.3 Bed Frame Assembly .............................................................................2-7
2.4 Frame Leg Adjustment.........................................................................2-12
2.5 Saw Head Assembly.............................................................................2-13
2.6 Log Loading Ramp (Option)................................................................2-19
SECTION 3 SETUP & OPERATION 3-1
3.1 Sawmill Setup.........................................................................................3-1
3.2 Replacing The Blade ..............................................................................3-9
3.3 Tensioning The Blade...........................................................................3-10
3.4 Tracking The Blade..............................................................................3-11
3.5 Starting The Motor...............................................................................3-12
3.6 Loading, Turning, And Clamping Logs...............................................3-13
3.7 Up/Down Operation .............................................................................3-15
3.8 Blade Guide Arm Operation.................................................................3-17
3.9 Blade Drive Operation..........................................................................3-18
3.10 Feed Operation .....................................................................................3-20
3.11 Cutting The Log ...................................................................................3-20

Table of Contents Section-Page
Table of Contents SW-07doc0801133
3.12 Edging...................................................................................................3-21
3.13 Blade Height Scale...............................................................................3-22
3.14 Water Lube Operation..........................................................................3-24
3.15 Transporting the Sawmill.....................................................................3-25
SECTION 4 MAINTENANCE 4-1
4.1 Wear Life................................................................................................4-1
4.2 Sawdust Removal...................................................................................4-1
4.3 Carriage Track & Rollers .......................................................................4-1
4.4 Vertical Mast Rails.................................................................................4-2
4.5 Miscellaneous Lubrication .....................................................................4-2
4.6 Blade Wheel Belts..................................................................................4-3
4.7 Up/Down System....................................................................................4-3
4.8 Miscellaneous Maintenance ...................................................................4-4
4.9 Safety Devices Inspection ......................................................................4-4
SECTION 5 TROUBLESHOOTING GUIDE 5-1
5.1 Sawing Problems....................................................................................5-1
SECTION 6 SAWMILL ALIGNMENT 6-1
6.1 Pre-Alignment Procedures......................................................................6-1
6.2 Preparing The Sawmill For Alignment ..................................................6-1
6.3 Blade Installation and Alignment...........................................................6-2
6.4 Blade Wheel Alignment.........................................................................6-3
6.5 Blade Guide Arm Alignment..................................................................6-8
6.6 Aligning The Blade Guides..................................................................6-10
6.7 Blade Deflection...................................................................................6-10
6.8 Blade Guide Vertical Tilt Adjustment..................................................6-11
6.9 Blade Guide Flange Spacing................................................................6-13
6.10 Horizontal Tilt Adjustment...................................................................6-14
6.11 Side Supports........................................................................................6-14
6.12 Blade Height Scale Adjustment............................................................6-16
6.13 Motor Drive Belt Adjustment...............................................................6-18
6.14 Safety Handle Linkage Adjustment......................................................6-19
6.15 Track Roller Distance Adjustment.......................................................6-20

-i G24doc080113
Sawmill and Customer Identification
Each Wood-Mizer LT10 sawmill is identified with a revision and VIN numbers.
See the chart for VIN description.
When you pick up your mill, you will receive a customer number. The VIN number,
revision, and your customer number expedite our service to you. Please write these
numbers below so you have quick, easy access to them.
REVISION AND VIN NUMBERS
456 A 4 24 1 X H P A F9 017 F9 .01
V.I.N. DESCRIPTION
LT10
Basic Sawmill I.D.
E7,5
Motor/Engine
A1.
Major “Revision” Code
00
Minor ”Revision”
Type
Revision Number
Code
S3
Bed Frame Type
Company Identification Number
456=Wood-Mizer Indiana
Weight Class; A=Under 1361 kg, B=1361-1814 kg,
C=1814-2268 kg, D=2269-3000kg
Product No.; 1=LT10/15, 2=LT20 Series,
4=LT40 Series, 7=LT70 Series
Length of the Trailer;
20= 20’ (6 m), 24=24’ (7 m), 35=35’ (11 m)
Number of axles on the trailer
Year of Manufacture;
G=2009, H=2010, J=2011, K=2012, L=2013, M=2014
State of Manufacture
N=Indiana, P=Poland
Month of Manufacture
A=January, B=February, C=March, etc...
Revision Level
Sequence Number
Ranging from 000-999
End of 17-Digit VIN
Revision Level (Repeated)
Two-Digit Minor Revision Level
Check Digit
Add all the number and divide by 11

G24doc080113 ii
IIMPORTANT! Read the entire Operator's Manual before
operating the sawmill. Take notice of all safety warnings
throughout this manual and those posted on the machine.
Keep this manual with this machine at all times, regardless
of ownership.
Customer No. Type VIN No. Revision No.
!

Introduction
General Contact Information
1
1-iii 1005doc080113 Introduction
Getting Service
Wood-Mizer is committed to providing you with the latest technology, best quality and
strongest customer service available on the market today. We continually evaluate our
customers’ needs to ensure we’re meeting current wood-processing demands. Your com-
ments and suggestions are welcome.
General Contact Information
From Europe call your local distributor or our European Headquarters and Manufacturing
Facility in Kolo, Nagórna 114 St, Poland at [phone]. From the continental U.S.,
call our U.S. Headquarter 8180 West 10th St.Indianapolis, IN 46214, toll-free at
1-800-525-8100. Ask to speak with a Customer Service Representative. Please have
your machine identification number and your customer number ready when you call. The
Service Representative can help you with questions about the operation and
maintenance of your machine. He also can schedule you for a service call.
Office Hours:
Please have your vehicle identification number and your customer number ready when
you call.
Wood-Mizer will accept these methods of payment:
Visa, Mastercard, or Discover
COD
Prepayment
Net 15 (with approved credit)
Be aware that shipping and handling charges may apply. Handling charges are based on
size and quantity of order.
Country Monday - Friday Saturday Sunday
Poland 7 a.m.- 3 p.m. Closed Closed
US 8 a.m.- 5 p.m. 8 a.m.- 12 p.m Closed

Introduction
Branches & Authorized Sales Centers
Introduction 1005doc080113 1-iv
1
Branches & Authorized Sales Centers
EUROPE UNITED STATES
European Headquarters
Wood-Mizer Industries Sp. z o.o.
Nagórna 114, 62-600 Koło, Poland
Tel.: [phone]
Fax: [phone]
www.woodmizer.eu
World Headquarters
Wood-Mizer LLC
8180 West 10th Street
Indianapolis,Indiana 46214-2400,
USA
Tel.: [phone]
Fax: [phone]
www.woodmizer.com
BELARUS
MOST-GRUPP
Siemashko 15, k.3
Minsk 2200116
Tel.: [phone]
Fax: [phone]
GSM: [phone]
e-mail: [email protected]
SWITZERLAND Bruno Steiner
Striegelgasse 2
CH-6214 Schenkon
Tel.: [phone]
Fax: [phone]
e-mail: [email protected]
RUSSIA Dariusz Mikołajewski
OOO WOOD-MIZER INDUSTRIES
141031, Moscow
Reg., Mytishenski raj., pos. Veshki,
Zavodskaja str., 3B
Tel.Fax: [phone]
Tel.Fax: [phone]
e-mail: [email protected]

Introduction
Branches & Authorized Sales Centers
1
1-v 1005doc080113 Introduction
BULGARIA Kalin Simeonov
Ecotechproduct
38 Star Lozenski pat str.
Sofia 1186
Tel.: [phone]
Tel.: [phone]
Tel:/Fax
: [phone]
Kalin Simeonov
GSM: [phone]
e-mail: [email protected]
HUNGARY Wiktor Turoczy
Wood-Mizer Hungary K.F.T.
Szonyi Ut 67., 2921 Komárom
Tel.:/Fax: [phone]
e-mail: [email protected]
RUSSIA Far East Wladimir Głazaczew
“WM Service”
Krasnoretchenskaya Str.111
680006 Khabarovsk
Tel.:/Fax: [phone]
e-mail: [email protected]
CROATIA Krešimir Pregernik
Pregimex d.o.o.
S. Batušiæa 31, 10090 Zagreb
Tel.:/Fax: [phone]
Krešimir Pregernik
GSM: [phone]
e-mail: [email protected]
ITALY Felice Pasquale
Wood-Mizer Italia Srl
Cda. Capoiaccio SN
86012 Cercemaggiore
Campobasso
Tel.:/Fax: [phone]
GSM: [phone]
e-mail: [email protected]
SERBIA Dragan Markov
Wood-Mizer Balkan d.o.o.
Svetosavska GA 3/3; P. Fah 25
23 300 Kikinda
Tel.:/Fax: [phone]
Tel.:/Fax: [phone]
GSM: [phone]
e-mail: [email protected]
CZECH REPUBLIC Miroslaw Greill
Wood-Mizer CZ s.r.o.
Osvaldova 91
339 01 Klatovy-Luby
Tel.:/Fax: [phone]
Fax: [phone]
Miroslaw Greill
GSM: [phone]
e-mail: [email protected]
Subagent:
ITALY Franz Josef Reichsigl
Muls 21, 39058 Sarnthein
Tel.:/Fax: [phone]
GSM: [phone]
SLOVAKIA Wiktor Turoczy
Wood-Mizer Danubia s.r.o.
Hadovce 5, 94501 Komárno
Tel.: [phone]
Fax: [phone]
GSM: [phone]
e-mail: [email protected]
CZECH REPUBLIC Lubomir Kudlik
Wood-Mizer Moravia
Sovadinova 6
69002 Breclav
Tel.:/Fax: [phone]
Lubomir Kudlik
GSM: [phone]
e-mail: [email protected]
LATVIA Vilmars Jansons
OBERTS Ltd
Gaujas str. 32/2
LV-2167 Marupe, Rigas Raj.
Tel.: [phone]
Fax: [phone]
Vilmars Jansons
GSM: [phone]
Andris Orols
GSM: [phone]
e-mail: [email protected]
TURKEY
Er-Ka Ahsap Profil Kerestecilik San.
ve Tic. Ltd. Sti.
Adana Keresteciler Sitesi 191 sk No.41
ADANA
Tel.: [phone]
Fax: [phone]
GSM: [phone]
e-mail: [email protected]
FINLAND Howard Blackbourn
Oy Falkberg Jordbruk Ab
Falkintie 220
25610 Ylonkyla
Tel.: [phone]
Fax: [phone]
Howard Blackbourn
GSM: [phone]
e-mail: [email protected]
LITHUANIA Andrius Zuzevicius
UAB Singlis
Savanoriu pr. 187, 2053 Vilnius
Tel.: [phone]
Fax: [phone]
GSM: [phone]
e-mail: [email protected]
Dmitrij Gaiduk
GSM: [phone]
e-mail: [email protected]
UKRAINE Ivan Vinnicki
MOST UKRAINA
bul. Myru 3, Bajkivtsi Ternoplskyj r-j
Ternopolska oblast
47711 Ukraine
Tel/Fax: [phone]
GSM: [phone]
GSM: [phone]
E-mail: [email protected]

Introduction
Branches & Authorized Sales Centers
Introduction 1005doc080113 1-vi
1
FRANCE Laurence Serrurier
Wood-Mizer France
Zac du PrѐMarechal Route de Fruges
62560 Fauquembergues
Tel: [phone]
Fax: [phone]
GSM: [phone]
Mail: [email protected]
NORWAY Odd Edvoll
Wood-Mizer Nordic AS
Vardelia 17, 2020 Skedsmokorset
Tel.: [phone]
Fax: [phone]
GSM: [phone]
e-mail: [email protected]
e-mail: [email protected]
UNITED KINGDOM & IRELAND
Wood-Mizer UK
Hopfield Barn
Kenward Road, Yalding
Kent ME18 6JP, UK
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
David Darnell
10 Tennyson Avenue
Southend on Sea
Essex, SS2 5HD
David Darnell GSM: [phone]
Stephan Cull
Cembrandy Gardens, Manorwen
Fishguard, Pembrokeshire SA659PT
Tel.: [phone]
GSM: [phone]
SLOVENIA Jan Fale
FAMTEH d.o.o.
Gacnikova pot 2,
2390 Ravne na Koroskem
Tel.: [phone]
Fax: [phone]
Jan Fale
GSM: [phone]
e-mail: [email protected]
Matjaz Kolar
Tel.: [phone]
GSM: [phone]
e-mail: [email protected]
GERMANY Klaus Longmuss
Wood-Mizer Sägewerke GmbH
Dorfstraße 5, 29485 Schletau
Tel.: [phone]
Fax: [phone]
e-mail: [email protected]
Klaus Longmuss
Tel.: [phone]
GSM: [phone]
e-mail: [email protected]
Subagent:
SWEDEN Kjell Larsson
Mekwood AB
Slingan 14, 812 41 Gästrike-Hammarby
Tel.: [phone]
Kjell Larsson
GSM: [phone]
e-mail: [email protected]
IRELAND
Wood-Mizer Ireland
Stephen Brennan
Cum Lahardane Ballina County Mayo
Tel:[phone]
E-mail: [email protected]
Subagents:
DENMARK Brian Jensen
Arnborgvej 9, 7330 Brande- Fasterholt
Tel.: [phone]
Fax: [phone]
Brian Jensen
GSM: [phone]
e-mail: Fasterho[email protected]e.dk
ROMANIA Adrian Echert
SC WOOD-MIZER RO SRL
TRANSILVANIEI Nr. 5
Sibiu, Cisnadie 555300
Tel.:/Fax: : [phone]
GSM: [phone]
e-mail: [email protected]
Regional Manager - Asia
Wood-Mizer Asia Pte Ltd.
James Wong
Tel: [phone]
Fax: [phone]
WWW: www.woodmizerasia.com
E-mail: [email protected]
Netherlands Chris Dragt
Lange Brink 77d,
7317 BD Apeldoorn
Tel.: [phone]
Fax: [phone]
e-mail: [email protected]
Subagent:
ROMANIA M. Echert
S.C. Echert Comprod s.r.l
Str. Schitului Nr. 6, Apt.7 etajul-1
725 70 Vatra Dornei, Romania
Tel.:/Fax: [phone]
Tel. : [phone]
Regional Manager - Africa
Wood-Mizer Africa
Jean-Jacques Oelofse
UNIT 3, LEADER PARK, NO: 20 CHARIOT
ROAD
STORMILL, EXT 5, Roodepoort,
Johannesburg
Tel: [phone]
Fax: [phone]
Jean-Jacques Oelofse E-mail:
[email protected]
Jean-Jacques Oelofse
Skype:jean.jacques.pierre.oelofse

Safety
1
1-1 15doc080113 Safety
SECTION 1 SAFETY
1.1 Safety Symbols
This symbol calls your attention to instructions concerning your personal safety. Be sure to observe
and follow these instructions.
The word DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING suggests a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION refers to potentially hazardous situations which, if not
avoided, may result in minor or moderate injury to persons or
equipment.
Warning stripes are placed on areas where a single decal would be
insufficient. To avoid serious injury, keep out of the path of any
equipment marked with warning stripes.
Read and observe all safety instructions before operating this equipment! Also read any additional
manufacturer’s manuals and observe any applicable safety instructions including dangers, warnings,
and cautions.
Always be sure that all safety decals are clean and readable. Replace all damaged safety decals to
prevent personal injury or damage to the equipment. Contact your local distributor, or call your
Customer Service Representative to order more decals.
IMPORTANT! It is always the owner's responsibility to comply with all applicable federal, state and
local laws, rules and regulations regarding the ownership, operation and towing of your Wood-Mizer
sawmill. All Wood-Mizer mill owners are encouraged to become thoroughly familiar with these
applicable laws and comply with them fully while using the mill.
Always properly dispose of all sawing by-products, including sawdust and other debris, coolant, oil,
fuel, oil filters and fuel filters.
Safety instructions are listed in this section by the following operations:
Blade Handling,
Sawmill Setup
Sawmill Operation
Sawmill Maintenance

Safety
Blade Handling
Safety 15doc080113 1-2
1
1.2 Blade Handling
DANGER! Always disengage the blade and shut off the sawmill engine
before changing the blade. Failure to do so will result in serious injury.
WARNING! Always wear gloves and eye protection when handling
bandsaw blades. Changing blades is safest when done by one person!
Keep all other persons away from area when coiling, carrying or
changing a blade. Failure to do so may result in serious injury.
1.3 Sawmill Setup
WARNING! Do not set up the mill on ground with more than a 10
degree incline. If setup on an incline is necessary, put blocks under
one side of the mill or dig out areas for the legs to keep mill level.
Setting up the mill on an incline could cause it to tip over, resulting in
serious personal injury.
WARNING! Keep all persons out of the path of the saw head while
loading and unloading the sawmill. Failure to do so may result in
serious injury or death.
1.4 Sawmill Operation
IMPORTANT! The sawmill is intended for sawing wood only.
See Section Cutting Capacity for log size capacities of the machine.
IMPORTANT! The operator of the sawmill should get adequate
training in the operation and adjustment of the machine.
DANGER! Make sure all guards and covers are in place and secured
before operating or towing the sawmill. Failure to do so may result in
serious injury.
DANGER! Be sure the blade housing cover is in place and secured.
Do not open the blade housing when the blade is engaged.
DANGER! Always keep hands away from moving bandsaw blade.
Failure to do so may result in serious injury.
DANGER! Keep all persons out of the path of moving equipment and
logs when operating sawmill or loading and turning logs. Failure to do
so may result in serious injury.
DANGER! Maintain a clean and clear path for all necessary movement
around the mill and lumber stacking areas. Failure to do so may result
in serious injury.
!

Safety
Sawmill Operation
1
1-3 15doc080113 Safety
WARNING! Always wear eye, ear, respiration and foot protection as
well as safety clothing when operating the sawmill. Failure to do so
may result in serious injury.
WARNING! Secure all loose clothing and jewelry before operating the
sawmill. Failure to do so will result in serious injury or death.
WARNING! Always make sure log is clamped securely before sawing.
Failure to do so will result in serious injury or death.
WARNING! Use ONLY water or alcohol solution with the water lube
accessory. Never use flammable fuels or liquids. If these types of
liquids are necessary to clean the blade, remove it and clean with a
rag. Failure to do so will result in serious injury or death.
CAUTION! Be sure the log clamps are all the way down before loading
a log onto the bed. Failure to do so may result in machine damage.
CAUTION! Before loading a log, be sure the cutting head is moved far
enough forward so the log does not hit it. Failure to do so may result in
machine damage.
CAUTION! Do not try to force the saw head beyond its upper and
lower travel limits. Damage to the up/down system may result.
CAUTION! Be sure to stop the blade when returning the carriage.
This will not only prevent the blade from being pulled off and ruined by
a wood sliver, but also will increase the life of the blade.
CAUTION! Remove the optional loading ramps before sawing.
CAUTION! Never clean the blade or the blade wheels with a brush
or a scraper during sawmill operation.
CAUTION! Before installation of the blade, inspect it for damage and
cracks. Use only properly sharpened blades. Always handle the blade
with extreme caution. Use suitable carrier equipment for transporting
the blades.
CAUTION! Always wear gloves when handling the blade. Never grab
the blade with bare hands!
CAUTION! If the blade breaks during sawmill operation, push the
EMERGENCY STOP button to stop the blade motor and wait
10 seconds before you open the blade housing cover.
CAUTION! The sawmill’s work-stand should be equipped with a 4 kg
or bigger dry powder extinguisher.

Safety
Sawmill Maintenance
Safety 15doc080113 1-4
1
1.5 Sawmill Maintenance
CAUTION! Reinstall the track wiper so that it lightly touches the track
bar. If the wiper presses too firmly against the bar, it can cause the
power feed to bind.
CAUTION! Never use grease on the mast rails as it will collect
sawdust.
See Table 1-1. Pictogram decals used to warn and inform the user about danger in the LT10.
TABLE 1-1
Decal View W-M No. Description
096317 CAUTION! Read thoroughly the manual
before operating the machine. Observe all
safety instructions and rules when
operating the sawmill.
099220 CAUTION! Close all guards and covers
before starting the machine.
099220

Safety
Sawmill Maintenance
1
1-5 15doc080113 Safety
099219 Blade tension. Turning the bolt clockwise
will increase the blade tension and turning
the bolt counterclockwise will decrease the
tension.
099221 CAUTION! Keep all persons a safe
distance away from work area when
operating the machine.
096316 CAUTION! Do not open or close the
electric box when the switch is not in the
“0” position.
096319 CAUTION! Disconnect power supply
before opening the box.
TABLE 1-1
099219
+
099221

Safety
Sawmill Maintenance
Safety 15doc080113 1-6
1
096321 Blade movement direction
S12004G CAUTION! Always wear safety goggles
when operating the sawmill!
S12005G CAUTION! Always wear protective ear
muffs when operating the sawmill!
501465 CAUTION! Always wear safety boots when
operating the sawmill!
501467 Lubrication Point
TABLE 1-1

Safety
Sawmill Maintenance
1
1-7 15doc080113 Safety
P11789 Aligning the blade on the wheels
099226 Power feed system engagement
092597 Setting the blade tension indicator
P85070 CE safety certification
099401 Russian safety certification
TABLE 1-1
099226
092597
099401

Safety
Belt Sizes
Safety 15doc080113 1-8
1
1.6 Belt Sizes
See Table 1-2. Belt sizes for the LT10 are shown.
S20097F 2925 RPM - Motor rotation direction
P85066 Blade positioning
501477 Safety handle. The blade is stopped when
the handle is released.
Description Belt Size Wood-Mizer
Part #
Motor Drive Belt E7.5 B81 014819
Blade Pulley Belts B57 1
1 To insure proper blade tracking, use Goodyear, Dayco Super II, or Browning belts
only.
P04185
TABLE 1-2
TABLE 1-1
S20097F
2925 RPM
P85066
3-4 mm

Safety
Blade Sizes
1
1-9 15doc080113 Safety
1.7 Blade Sizes
See Table 1-3. Wood-Mizer TRU•SHARP™ offers three types of blades to provide efficient sawing
for all models of sawmills. The engine/motor size of your sawmill and the type of wood you saw
should determine which blade you choose for optimum performance.
See The Blade Handbook for blade hook angle, tooth height, and tooth set specifications.
1.8 Cutting Capacity
See Table 1-4. The log size capacities of the LT10 sawmills are listed below.
1.9 Engine/Motor Specifications
See Table 1-5. The power options available for the LT10 sawmill are listed below.
Engine/Motor Size Recommended Blade For Sawing:
Softwood Hardwood Frozen or Hard-to-Cut
Wood
5 hp - 15hp B275IH1030
B275IH741030
B375IH929 B375IH929 1
1 TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are designed to cut frozen and/or
extremely dense, hard-to-cut wood.
Standard TRU•SHARP™ blades use a 10/30 profile.
16hp or more B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030 2
2 Customer may choose preferred blade.
B375IH929 1
Electric Motor B376IH1030
B376IH741030
B275IH1030
B275IH741030
B376IH1030
B376IH741030 2
B375IH929 1
TABLE 1-3
Max. Diameter Max. Length 1
1 Each additional bed frame segment adds approximately 195
cm ( 6’ 5” ) to length capacity.
LT10 S3 70 cm 5,4 m
LT10 S4 70 cm 7,3 m
TABLE 1-4
Engine/Motor Type Manufacturer Model Number Specifications
5.5 kW Electric Motor Siemens, Germany 1LA7130-2AA60-2 3 x 400V, 50 Hz
TABLE 1-5