Woodmizer Tvs Manual instruction

Safety, Setup, Operation & Maintenance

Twin Vertical Saw (TVS) rev. B3.00

Safety is our #1 concern! Read and understand

all safety information and instructions before oper-

ating, setting up or maintaining this machine.

Form #1672

reproduced in any form by any photographic, electronic, mechanical or other means or

used in any information storage and retrieval system without written permission from

Wood-Mizer

8180 West 10th Street

Indianapolis, Indiana 46214

Table of Contents Section-Page

Table of Contents 1005doc070717 iii

SECTION 1 SAFETY 1-1

1.1 Safety Symbols.......................................................................................1-1

1.2 Safety Instructions..................................................................................1-1

SECTION 2 OPERATION 2-1

2.1 General Information ...............................................................................2-1

2.2 Control Overview ...................................................................................2-4

2.3 TVS Setup ..............................................................................................2-6

2.4 Replacing The Blades.............................................................................2-8

2.5 Tensioning The Blade...........................................................................2-10

2.6 Tracking The Blade ..............................................................................2-11

2.7 Machine Start........................................................................................2-12

2.8 Cutting Width Setting...........................................................................2-15

2.9 The LubeMizer System ........................................................................2-16

2.10 Operation Procedure.............................................................................2-18

2.11 Loading Ramp Operation .....................................................................2-20

2.12 Cross Transfer Deck Operation ............................................................2-21

SECTION 3 SETWORKS OPERATION 3-1

3.1 TVS Setworks (Optional).......................................................................3-1

SECTION 4 MAINTENANCE 4-1

4.1 Wear Life................................................................................................4-1

4.2 Blade Guides ..........................................................................................4-1

4.3 Sawdust Removal ...................................................................................4-2

4.4 Miscellaneous Lubrication .....................................................................4-3

4.5 Blade Tensioner......................................................................................4-5

4.6 Belts........................................................................................................4-5

4.7 Drive Belt Adjustment............................................................................4-6

4.8 Feed Track Chain Tension......................................................................4-9

4.9 Log Deck and Transfer Deck Drive Chain Tension.............................4-11

4.10 Lube Mizer System...............................................................................4-12

SECTION 5 ALIGNMENT 5-1

5.1 Routine Alignment Procedure ................................................................5-1

5.2 Complete Alignment Procedure ...........................................................5-13

SECTION 6 SPECIFICATIONS 6-1

6.1 Overall Dimensions ................................................................................6-1

6.2 Electrical Requirements..........................................................................6-4

6.3 Cutting Capacity.....................................................................................6-5

6.4 Motor Specifications ..............................................................................6-5

6.5 Electrical Information.............................................................................6-5

INDEX I

Table of Contents Section-Page

iv 1005doc070717 Table of Contents