Worker 11876 User manual

USER MANUAL –EN
Protective Pads
Picture is only for illustration purpose.

2
CONTENTS
INTRODUCTION..................................................................................................................................... 3
PRODUCT MATERIAL............................................................................................................................ 3
SAFETY PRECAUTIONS........................................................................................................................ 3
PROPER USING..................................................................................................................................... 4
PUTTING ON THE KNEE AND ELBOW GUARDS................................................................................ 4
PUTTING ON THE WRIST GUARDS..................................................................................................... 4
CLEANING AND MAINTENANCE .......................................................................................................... 5
STORAGE AND TRANSPORT............................................................................................................... 5
SIZE CHART ........................................................................................................................................... 5
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS................................................... 5

3
INTRODUCTION
Read this manual carefully before first using and keep it for future reference. Observe all instructions
and recommendations and don’t forget, that no protective equipment can offer the absolute protection.
Use it carefully and always pay attention.
This product meets the standard ČSN EN 14120, Category 1 –suitable for regular using.
As per the same standard, the protectors are classified depending on the maximum user weight:
A. Max. user weight up to 25 kg.
B. Max. user weight between 25 kg and 50 kg.
C. Max. user weight over 50 kg.
To choose the best product for your activity, follow the effectiveness and body weight.
Product Nr.
Class
11876, 11878, 16, 5478, 5486
A
5471
C
15996
B
263
B
11880, 11882
B
PRODUCT MATERIAL
Outer parts
PVC
Inner parts
Nylon
SAFETY PRECAUTIONS
•Read this manual carefully and keep it for future reference.
•Try different sizes and choose the best for you. Protectors must fit well. Pair protectors should
be used simultaneously.
•Choose the right protectors for your activities depending on the category and max. user
weight. Never exceed these limits.
•These protectors are suitable for users of skateboards, roller-skates and in-line skates. They
are not intended for ice hockey.
•These protectors are not intended to provide protection in the event of a serious fall when
going at higher speed (follow limits for a concrete product) and provides only limited protection
in high-speed impact with stationary hard surfaces. It doesn’t protect the user against
collisions with moving vehicles.
•These protective pads are not suitable for using on motorcycles or motor vehicles.
•Don’t do any modification. You could decrease product safety.
•Don’t use this product at temperature below 5 °C or above 50 °C. Its protection could be
reduced.
•These safeguards must be carefully examined for damage before each using, especially if
some falls or impacts have occurred.
•If you find some signs of damage, cracks, breaks or broken components, don’t use it.
•Protectors should be properly attached.

4
•Velcro fasteners must be clean and free of dirt to work properly.
•If the adhesion of Velcro fasteners is not good, they must be replaced.
PROPER USING
Never forget to use the protection set. However, full safety cannot be assured even using all protective
components. Always wear a helmet and protection set that includes knee, wrist and elbow protective
pads.
PUTTING ON THE KNEE AND ELBOW GUARDS
1. Open the Velcro fasteners.
2. Put the safeguards on the knees or arms/elbows and take care that the plastic caps cover the
knees or the elbows. Should your safeguard have a stocking, we recommend to pull this over
the relevant body part (arm or leg).
3. Wrap the elastic fastening straps around the relevant bod part and press the ends firmly onto
the appropriate surface (Velcro).
4. Knee and arm guards must fit firmly to avoid slipping off and to assure the best protection.
Don’t tighten them too firmly to avoid blocking of blood circulation.
5. Do it reversely to remove the protectors.
PUTTING ON THE WRIST GUARDS
1. Open the Velcro fasteners.
2. Guard for left wrist is marked “left” and guard for right wrist is marked “right”
3. Put your thumb of the left hand into the hole of the cuff so as the palm of the hand is facing the
plastic protection bulge.
4. Wind the longer Velcro strap around the elbow and tighten it.
5. The upper and lower Velcro strap should be winded and closed on right place.
6. Make sure the protective plastic part covers the relevant place.
7. Do the same operation for the other hand.
8. The pads should be well closed and protected from sliding off. Don’t tighten them too much to
avoid blocking of blood circulation.
Left
Right

5
CLEANING AND MAINTENANCE
•Remove larger dirt particles from the safeguards by brushing them off.
•Persistent dirt can be removed by washing the safeguards in lukewarm water or in detergent
solution and rinsing with clear water.
•Never use solvents or abrasives.
•Don’t wash it in a washing machine, don’t dry it in a spin dryer and don’t iron it.
Hand wash only
Don’t bleach
Don’t tumble dry
Don’t iron
Don’t dry clean
STORAGE AND TRANSPORT
•Don’t expose it to direct sunlight and avoid excess warm during storage and transport to avoid
cracking or decomposition.
•Improper storing could shorten its lifespan or significantly influence its functionality.
•Only faultless safeguards can offer adequate protection level.
•Protect it from fire and heat sources.
SIZE CHART
Mark
Size
S
up to 120 cm
M
from 120 cm to 160 cm
L
from 150 cm to 180 cm
XL
from 170 cm to 200 cm
NOTE: Consider your body height and proportions to choose the right size. Try more sizes and select
the best one.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim
Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil
Code, Act No. 513/1991 Coll., Commercial Code, and Act No. 634/1992 Coll., Consumer Protection
Act, as amended, also in cases that are not specified by these Warranty rules.
The seller is SEVEN SPORT s.r.o. with its registered office in Borivojova Street 35/878, Prague
13000, Company Registration Number: 26847264, registered in the Trade Register at Regional Court
in Prague, Section C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not
conclude and execute the Contract in order to run or promote his own trade or business activities.
“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the
purpose of using the Goods or services for his own business activities. The Buyer conforms to the

6
General Purchase Agreement and business conditions to the extent specified in the Commercial
Code.
These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement
made between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless
otherwise specified in the Purchase Agreement, in the Amendment to this Contract or in another
written agreement.
Warranty Conditions
Warranty Period
The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in
the Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The legal
warranty period provided to the Consumer is not affected.
By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a
certain period of time, suitable for regular or contracted use, and that the Goods shall maintain its
regular or contracted features.
The Warranty does not cover defects resulting from (if applicable):
•User’s fault, i.e. product damage caused by unqualified repair work, improper assembly,
insufficient insertion of seat post into frame, insufficient tightening of pedals and cranks
•Improper maintenance
•Mechanical damages
•Regular use (e.g. wearing out of rubber and plastic parts, moving mechanisms, joints etc.)
•Unavoidable event, natural disaster
•Adjustments made by unqualified person
•Improper maintenance, improper placement, damages caused by low or high temperature,
water, inappropriate pressure, shocks, intentional changes in design or construction etc.
Warranty Claim Procedure
The Buyer is obliged to check the Goods delivered by the Seller immediately after taking the
responsibility for the Goods and its damages, i.e. immediately after its delivery. The Buyer must check
the Goods so that he discovers all the defects that can be discovered by such check.
When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase
and validity of the claim by the Invoice or Bill of Delivery that includes the product’s serial number, or
eventually by the documents without the serial number. If the Buyer does not prove the validity of the
Warranty Claim by these documents, the Seller has the right to reject the Warranty Claim.
If the Buyer gives notice of a defect that is not covered by the Warranty (e.g. in the case that the
Warranty Conditions were not fulfilled or in the case of reporting the defect by mistake etc.), the Seller
is eligible to require a compensation for all the costs arising from the repair. The cost shall be
calculated according to the valid price list of services and transport costs.
If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is not accepted.
The Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim.
In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by
the Seller, the Seller shall fix the reported defects by means of repair or by the exchange of the
damaged part or product for a new one. Based on the agreement of the Buyer, the Seller has the right
to exchange the defected Goods for a fully compatible Goods of the same or better technical
characteristics. The Seller is entitled to choose the form of the Warranty Claim Procedures described
in this paragraph.
The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods,
unless a longer period has been agreed upon. The day when the repaired or exchanged Goods is
handed over to the Buyer is considered to be the day of the Warranty Claim settlement. When the
Seller is not able to settle the Warranty Claim within the agreed period due to the specific nature of the
Goods defect, he and the Buyer shall make an agreement about an alternative solution. In case such

7
agreement is not made, the Seller is obliged to provide the Buyer with a financial compensation in the
form of a refund.
SEVEN SPORT s.r.o.
Registered Office: Borivojova 35/878, 130 00 Praha 3, Czech Republic
Headquarters: Delnicka 957, 749 01 Vitkov, Czech Republic
Warranty & Service Centre: Cermenska 486, 749 01 Vitkov, Czech Republic
CRN: 26847264
VAT ID: CZ26847264
Phone: [phone]
E-mail: [email protected]z
[e-mail]
[email protected]z
Web: www.insportline.cz
SK
INSPORTLINE s.r.o.
Headquarters, Warranty & Service centre: Elektricna 6471, 911 01 Trencin, Slovakia
CRN: 36311723
VAT ID: SK2020177082
Phone: [phone]
E-mail: objednavk[email protected]
[e-mail]
[email protected]
Web: www.insportline.sk
Date of Sale: Stamp and Signature of Seller: