WorkSimpli PL215 User manual

ASSEMBLY INSTRUCTIONS
MODEL: PL215
1 of 2.
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
Top Panel
Klix Cam
12 Pcs
Cam Lock
12 Pcs
12
Side Panel-L
A B
3 4
Housing
Cap (Short)
12 Pcs
C
5
M4 x 65
Allen-Key
1 Pc
Insert the cam with the arrow
pointing towards the hole in
the edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
E
Back Panel
D F
Bottom Panel
MODEL: PL215
1 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
HARDWARE
COMPONENTS
KLIX CAM INSTRUCTIONS
G
PL213
(SOLD SEPERATELY)
+
JCBC Screw
M6 x 40mm = 4pcs
14 Washer = 4pcs
+
PL214
(SOLD SEPERATELY)
A
B
C
E
D
G
F
Side Panel-R

ASSEMBLY INSTRUCTIONS
MODEL: PL215
2 of 2.
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
2 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION:
3
Attach Housing Caps to
all Klix Cams by pushing
neck of cap through
center of cam.
4
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
1 2
AD
B
C
B
AD
E
E
Attach Top
Panel(A),Bottom Panel(D)
& Back Panel(E) to Side
Panel(B) by using Cam
Lock(1) and Klix Cam(2).
Attach Side Panel(C) to
assembled components by
using Cam Lock(1) and Klix
Cam(2).
3
A
B
C
E
D
G
F
5
4
Attach PL215 to PL213(G) by
usingJCBC Screw & Flat
Washer(4).
MODEL: PL215
INSTRUCTIONS: