World Market 556650 User manual

THANK YOU FOR PURCHASE. IF YOU HAVE ANY QUESTIONS PERTAINING
TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT THE
NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER
SERVICE CALL CENTER TOLL FREE AT 877-967-5362 FOR ASSISTANCE.
Assembly Instructions
RATTAN DAYBED
SKU - 556650
Page–1 REV08022018

Part list
Label
Picture
Description
Qty
A
Headboard
1
B
Right Panel
1
C
Left Panel
1
D
Front Panel
1
E
Supporting Rails
3
F
Mattress Panel
1
Page–2 REV08022018

Hardware list
Label
Picture
Description
Qty
H1
Short Philips Screws
20 mm
8
H2
Long Philips Screws
50 mm
6
H3
Allen Bolt
M6 x 50 mm
16
Tool list
Page –3 Rev 08022018
Label
Picture
Description
Qty
T1
Allen Key
M6
1
T2
Philips Screwdriver
Not
Provided

Assembly Preparation
Before Beginning :
• Read instructions, cover to cover-
•Have 2 adults on hand for assembly-
•Do not assemble on flooring or carpet-
•Assemble on a clean non-marring surface (packing foam)-
•Save all packaging until finished-
•In case of missing parts, please contact your nearest Cost Plus World Market store
or call our customer service call center at call1-877-967-5362.
Page –4 Rev 08022018
C
H-1
A
E
D
E
H-2
E
H-3
B
F
T-1
T-2
X 8
x 8
x 8
H-3
x 8

D
B
A
H-3
T-1
D
B
(H-3) Alley Bolt x 10
Position and attach Headboard (A) to Left Panel (C) as shown above. Secure corner joint with one Allen
Bolt (H3) at lower corner. Loosely tighten Bolt using Allen Key (T1), provided.
Step 1 : Attach Headboard to Left Panel
(H-3) Allen Bolt x 1
Page 5 Rev 08022018
Assembly Steps
H1
A
C
T1
H3

Position and attach Front Panel (D) to the Left Panel (C) as shown. Secure this front corner with Allen Bolt (H3) at
location shown. Loosely tighten Bolt with the Allen Key (T1).
Continue to secure Headboard (A) to Left Panel (C) using 3 Allen Bolts (H3). Access from the rear side of the
daybed. Repeat the same step to secure Left Panel (C) to Front Panel (D), access from the inside of the Left Panel
(C). Loosely tighten all Bolts with Allen Key (T1).
Step 2 : Attach Front Panel to Left Panel
(H-3) Allen Bolt x 7
Page 6 Rev 08022018
Assembly Steps
D
C
A

Repeat the same steps to secure Right Panel (B) to Front Panel (D) and Headboard (A) using Allen Bolts (H3).
Secure the lower right and rear CORNERS (close to the metal plates) with bolt first before securing the
vertical front and rear bed posts with 3 bolts each.
Loosely tighten all Bolts with Allen Key (T1) to ensure all bolts locations are properly engaged.
Step 3 : Attach Right Panel to Front Panel
(H-3) Allen Bolt x 8
Page 7 Rev 08022018
Assembly Steps
B
C

Secure all 4 lower corners of the bed by installing the Short Phillips screws (H1) through the pre-installed metal
connector plates as shown with a Phillips screw drivers, not provided.
Step 4 : Secure all Pre-installed Corner Plates with Screws
(H-1) Short Phillips Screw20mmx8
Page 8 Rev 08022018
Assembly Steps

Step 5 : Attach Supporting Rails secure with Long Screws.
(H-2) Long Phillips Screw 50mm x 6
Page 9 Rev 08022018
Assembly Steps
Position each of the 3 Supporting Rails (E) to connect with the Headboard (A) and Front Panel (D) at locations
shown. Secure all connections with Long Phillips Screws (H2). Tighten all screws with Phillips Screw Driver, not
provided. Using Allen Key (T1) tighten all Allen Bolts from previous steps to ensure a rigid and stable bed frame
assembly.

Step 6 : Assembly Mattress Panel.
Page 10 Rev 08022018
Assembly Steps
With the help of minimum 2 people, gently place the Mattress Panel (F) onto the assembled bed as shown. Carefully
lift and move the bed to the desired location. The bed is ready for use.
F

Care & Maintenance
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside. For indoor use only.
Not for commercial use. For residential use only.
 Dust and pick-up spills using a clean, non-colored, lint-free cloth.
 Stains may be removed with mild soap solution and damp cloth.
Page 11 Rev 08022018