World Market MATTEO OCCASIONAL BENCH 606742 User manual

NEAREST WORLD MARKET STORE.

Turning Leg
Center Leg
(M6x1mm)
Flat Washers (M6x1mm)

• Have 2 adults on hand for assembly-
•
• Assemble on a clean non-marring surface (packing foam) -
•
•
Market store or call our customer service call center at call 1-877-967-5362.
• Read instructions, cover to cover-
• Unpack all hardware bags and components to ensure y ou have all parts-
In case of missing parts, please contact your nearest World

against the Seat Frame (A).
Place Seat Frame (A) upside down onto a padded, non marring Surface. Align and
engage all turning legs on the bottom seat frame (A) and rotate clockwise leg (B).
Continue to twist the legs firmly in the clockwise direction until they are fully tightened

Placing Center Leg (C) as shown.
Secure the Center Leg (C) to Seat Frame (A) by using Allen Bolts (H-1),
Spring Washer (H-2) and Flat Washer (H-3), stacking the hardware in the order as shown.
Engage all bolts first, and then fully tighten using Allen Key (T-1).

Turn the Bench upright. Place Seat Cushion (D) and Back Cushion (E) into position.
Assembly is now complete and the Bench is ready for use.
Note: Leveler can be used for additional adjustment (if needed). Check and ensure all legs
are fully tightened every 3 months to ensure stability.

CUSHION AND SLIP COVER CARE:
For minor spots wipe with a wet cloth and use a mild detergent. Do not use bleach.
Slip covers can also be placed in a washing machine.
Remove the slip cover from the insert, do not place insert in the washing machine.
Use gentle cycle, cold water and no bleach.
Line dry, do not place in the dryer.
We use a higher density foam to ensure the cushion does not break down in the outdoor elements.
Cushion will soften over time.
Flip the cushions to maintain the quality.
For best results remove cushions during cold or inclement weather and store in a dry area.
If cushions do become wet allow to completely dry before storing to prevent mold and mildew.