Worx WX101.7 User manual

WX101 WX101.1
WX101.2 WX101.7 WX101.9
20V Cordless Drill Driver
החדקמ/תנעטנ תיטוחלא הגרבמ


4
5
6
7
8
9
12 3
2
1
1
2
3
2
1
3
1
23
C1
B2
C3
C2
D
E1 E2
F
B1
A4
A2A1
A3
WX101.2
WX101 WX101.1

2
1
1
2
3
2
1
3
1
23
C1
B2
C3
C2
D
E1 E2
F
B1
A4
A2A1
A3
WX101.2
WX101 WX101.1

2
1
1
2
3
2
1
3
1
23
C1
B2
C3
C2
D
E1 E2
F
B1
A4
A2A1
A3
WX101.2
WX101 WX101.1

6
20V Cordless Drill Driver EN
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application. The
correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power

7
20V Cordless Drill Driver EN
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specified
in the instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be performed
by the manufacturer or authorized service
providers.
DRILL SAFETY WARNINGS
1) Safety instructions for all operations
a) Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring. Cutting accessory
or fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
2) Safety instructions when using long drill
bits
a) Never operate at higher speed than the
maximum speed rating of the drill bit. At
higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
b) Always start drilling at low speed and with
the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
c) Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of
control, resulting in personal injury.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells or
battery pack.
b) Do not short-circuit a battery pack. Do not
store battery packs haphazardly in a box or
drawer where they may short-circuit each
other or be short-circuited by conductive
materials. When battery pack is not in use,
keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
c) Do not expose battery pack to heat or fire.
Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical
shock.
e) In the event of battery leaking, do not
allow the liquid to come into contact
with the skin or eyes. If contact has been
made, wash the affected area with copious
amounts of water and seek medical advice.
f) Seek medical advice immediately if a cell or
battery pack has been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a
clean dry cloth if they become dirty.
i) Battery pack needs to be charged before
use. Always refer to this instruction and use

8
20V Cordless Drill Driver EN
the correct charging procedure.
j) Do not maintain battery pack on charge
when not in use.
k) After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
l) Battery pack gives its best performance
when it is operated at normal room
temperature (20 °C ± 5 °C).
m) When disposing of battery packs, keep
battery packs of different electrochemical
systems separate from each other.
n) Recharge only with the charger specified
by Worx. Do not use any charger other than
that specifically provided for use with the
equipment. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
o) Do not use any battery pack which is not
designed for use with the equipment.
p) Keep battery pack out of the reach of
children.
q) Retain the original product literature for
future reference.
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.
t) Do not mix cells of different manufacture,
capacity, size or type within a device.
u) Do not remove battery pack from its original
packaging until required for use.
v) Observe the plus (+) and minus (–) marks on
the battery and ensure correct use.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Batteries may enter water cycle if disposed
improperly, which can be hazardous
for ecosystem. Do not dispose of waste
batteries as unsorted municipal waste.
Do not burn
Li-Ion
Li-Ion
Li-Ion battery. This product has been
marked with a symbol relating to
‘separate collection’ for all battery
packs and battery pack. It will then
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous for
the environment and for human
health since they contain hazardous
substances.
Wear protective gloves.
Lock
Screwdriving
Drilling
Wood
Metal
High speed
Low speed

9
20V Cordless Drill Driver EN
COMPONENT LIST
1. KEYLESS CHUCK
2. TORQUE ADJUSTMENT RING
3. TWO-SPEED GEAR CONTROL
4. FORWARD/REVERSE ROTATION CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BATTERY PACK RELEASE BUTTON *
8. ON/OFF SWITCH
9. LED LIGHT
* Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
Type WX101 WX101.1 WX101.2 WX101.7 WX101.9 (1-designation of machinery, representative
of Cordless Drill)
WX101 WX101.1 WX101.2 WX101.7 WX101.9
Voltage 20 V Max*
No load speed 0-400/0-1450 /min
Number of clutch positions 15+1
Max torque 30 N.m
Chuck capacity 10 mm
Max. drilling capacity Steel 10 mm
Wood 25 mm
Machine weight 1.3 kg 0.9 kg
* Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is
18 volts.
ACCESSORIES
WX101 WX101.1 WX101.2 WX101.7 WX101.9
Battery pack (WA3550.1)
2 2 /
1
/
Charger (WA3760)
1 1 /
1
/
Battery pack (WA3551.1)
/ / 1
/
/
Charger (WA3860)
///
/
/
Charger (WA3880)
/ / 1 / /
Double ended bits
11111
35pcs Accessories (WA1133)
/////
carry bag WA0086
1 / /
1
/

10
20V Cordless Drill Driver EN
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.
ASSEMBLY AND
OPERATION
ACTION FIGURE
BEFORE OPERATION
Removing the battery pack See Fig. A1
Charging the battery See Fig. A2,
A3,
Installing the battery pack See Fig. A4
ASSEMBLY
CHUCK ADJUSTMENT
Warning: Always lock off trigger switch and
disconnect tool from power source when
changing accessories. Always ensure the bit is secure
before starting the tool. Damage to the Chuck or a
loose bit may cause possible personal injury.
-- Removing the bits See Fig. B1
-- Inserting the bits See Fig. B2
OPERATION
Forward/Reverse Rotation Control
Warning: Never change the
direction of rotation when the
chuck is rotating, wait until it has
stopped!
See Fig. C1,
C2, C3
TWO-SPEED GEAR CONTROL
Warning: To prevent gear
damage, always allow the chuck
to come to a complete stop before
changing the direction of rotation.
See Fig. D
TORQUE ADJUSTMENT
Drilling, Screw driving
See Fig.
E1, E2
Operating the On/Off switch
Warning: Do not operate for
long periods at low speed
because excess heat will be produced
internally.
See Fig. F
LED light indicator
Before operation, the LED light will be
activated when the On/Off switch is
slightly depressed.
Warning: To turn on the light,
press the On/Off switch and
make sure the Forward/Reverse
Rotation Control is on right/left
position.
The tool and battery are equipped
with a protection system. When
the LED Light is quickly flashing 60
seconds and turn off, the system will
automatically cut off power to the
tool to extend battery life.The tool will
automatically stop during operation
if the tool and/or battery are placed
under one of the following conditions:
• Overloaded: The tool is operated
in a manner that causes it to draw
an abnormally high current. In this
situation, release theTrigger Switch
on the tool and stop the application
that caused the tool to become
overloaded.Then pull theTrigger
Switch again to restart.
• Overheated: Under the condition
above, if the tool does not start, the
Tool and Battery are overheated. In
this situation, let theTool and Battery
cool before pulling theTrigger Switch
again.
• Low battery voltage:The
remaining Battery capacity is too low
and the tool will not operate. In this
situation, remove and recharge the
Battery.
See Fig. F
PROBLEM SOLUTION
1. WHY DOES THE DRILL NOT TURN ON WHEN
YOU PRESS THE SWITCH?
The forward/reverse rotation control, which is on
top of the trigger, is positioned in the lock function.
Unlock the forward/reverse rotation control by
putting it into the required rotation position. Push
the trigger and the drill will start to rotate. Check
that the battery is charged and properly connected
to the tool.
2. THE DRILL STOPS BEFORE THE SCREW IS
COMPLETELY TIGHTENED. WHY?

11
20V Cordless Drill Driver EN
Verify the torque position of the torque adjusting
ring. Find the torque adjusting ring between the
chuck and the drill body. Position 1 is the lowest
torque (screw driving force) and position 15 is the
highest torque (screw driving force). Position is for
drill operation. Regulate the torque adjusting ring to
a higher position to reach the best result.
3. REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES
Charging time problems, as above, and having not
used a battery pack for a prolonged time will reduce
the battery pack working time.This can be corrected
after several charge and discharge operations by
charging & working with your drill. Heavy working
conditions such as large screws into hard wood will
use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery
pack below 0oC and above 45oC as this will affect
performance.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls
free of dust. Occasionally you may see sparks
through the ventilation slots.This is normal and will
not damage your power tool.
For Battery tools
The ambient temperature range for the use and
storage of tool and battery is 0℃-45℃.
The recommended ambient temperature range for
the charging system during charging is 0℃-40℃.
ENVIRONMENTAL
PROTECTION
Disposal
The machine, its accessories and packaging
materials should be sorted for environmen-
tally friendly recycling.The plastic components are
labeled for categorized recycling.

החדקמ/תנעטנ תיטוחלא הגרבמ HE
6
תוללוס םע םילכ רובע
הביבסה לע הנגה
ןשי רישכמ קוליס
מ”עב סיסקל םוקימס :הרבחה םש
הדוהי ןבא 9090 .ד.ת המידק יברעמ ת”א :תבותכ
09-7611222 :ןופלט
www.semicom.co.il

החדקמ/תנעטנ תיטוחלא הגרבמ HE
5
הלעפה תוארוה
:הרעה
שומישה דועיי
הלעפהו הבכרה
רויא הלועפ
רישכמב שומישה ינפל
הבכרה
:הרהזא
B1
B2
הלעפה
C1,C2,C3
:הרהזא
D
:הרהזא
E1,
E2
טנמומ ןונווכ
F
:הרהזא
F
דל תרואת
LED
:רתי סמוע •
:רתי תוממחתה •
:ךומנ הללוס חתמ •
תויעב ןורתפ
/הלעפהה קדה לע םיצחולשכ תלעופ הניא החדקמה עודמ .1
?יוביכ
?ואולמב קדוהמ גרובהש ינפל תרצוע החדקמה עודמ .2
1
18
?הללוסה תדובע ינמזב ינוש ישי עודמ .3
0°C
הקוזחת

החדקמ/תנעטנ תיטוחלא הגרבמ HE
4
רישכמה יקלח
תינספת .1
לותיפ טנמומ ןוויכ תעבט .2
תויוריהמ 2 ררוב רותפכ .3
הרוחא/המידק בוביסה ןוויכ גתמ .4
הכר הזיחא תידי .5
*הללוס .6
*הללוסה רורחש ספת .7
יוביכ/הלעפה קדה .8
דל תרואת .9
.)דרפנב השיכר( םיילנויצפוא םה תרבוחב םיראותמה/םיגצומה םירזיבאהמ קלח *
ינכט טרפמ
) 1- דועיי לש תונוכמ , גיצנ לש החדקמ םייטוחלא ( WX101 WX101.1 WX101.2 WX101.7 WX101.9
WX101.9 WXX101.7 WX101.2 WX101.1 WX101
* 20V
15+1
30
10
10
25
18V20V
הזיראה תלוכת
WX101.9 WX101.7 WX101.2 WX101.1 WX101
12 2
11 1
1
1
11111
35pcs
1 1

החדקמ/תנעטנ תיטוחלא הגרבמ HE
3
םילמס

החדקמ/תנעטנ תיטוחלא הגרבמ HE
2
ירח הרוטרפמטל וא שאל ילכ וא תוללוס זראמ ףושחל ןיא .ו־
℃130 .הג
זראמ תא ןועטל ןיא .הניעטה תוארוה לכ לע דיפקהל שי .ז
ןיוצמה חווטהמ תגרוחה הרוטרפמטב ילכה וא תוללוסה
.תוארוהב
תוריש .6
יאנכט י"ע ןתניהל ילמשחה הדובעה ילכל תורישה לע .א
.םיירוקמ ףוליח יקלחב שמתשמה ךמסומ
.םימוגפ תוללוס יזראמ ןקתל תוסנל ןיא .ב
תחדקמל תוחיטב תוארוה
טקפמיא
תולועפה לכל תוחיטב תוארוה )1
םיקדהמה וא ךותיחה רזיבא הבש ,הלועפ עוציב ןמזב )א
ילכה לש לבכה םע וא רתסנ טוויח םע עגמב אובל םילולע
הזיחא חטשמב ילמשחה הדובעה ילכב זוחאל דפקה ,ומצע
עגמב םיאבש םיקדהמ וא ךותיח רזיבא .דודיבב הפוצמה
יקלח למשחל םילולע ילמשח חתמל רבוחמה "יח" לבכ םע
תולמשחתהל םורגלו ילמשחה הדובעה ילכ לש םיפושח תכתמ
.ליעפמה
םיכורא םיחדקמב שומיש תעב תוחיטב תוארוה )2
לש תיברמה תוריהמה גורידמ ההובג תוריהמב ליעפהל ןיא )א
םקעתהל לולע חדקמה ,רתוי תוהובג תויוריהמב .חדקמה
דעוימה קלחה םע עגמב אובל ילבמ תוישפוחב בבותסי םא
.העיצפל םורגלו ,חודיקל
חדקמה הצק רשאכו הכומנ תוריהמב חודקל דימת לחתה )ב
,רתוי תוהובג תויוריהמב .חודיקל דעוימה קלחה םע עגמב
אובל ילבמ תוישפוחב בבותסי םא םקעתהל לולע חדקמה
.העיצפל םורגלו ,חודיקל דעוימה קלחה םע עגמב
.זרפומ ץחל ליעפת לאו חדקמה םע רשי וקב קר ץחל לעפה )ג
ןדבואל םורגל וא רבשיהלו ףפוכתהל םילולע םיחדקמ
.העיצפל ךכ בקעו ,הטילש
הללוסל תוחיטב תוארוה
וא הללוסה יאת תא וסרגת לאו וחתפת לא ,וקרפת לא .א
.הללוסה
זגראב הזפוחב תוללוס ונסחאת לא .הללוסה תא ורצקת לא .ב
קתהל וא היינשה תא תחא רצקל תולוכי ןה םהב הריגמב וא־
.םיכילומ םירמוח י"ע רצ
ןוסחאמ וענמיה .שאל וא םוחל תוללוסה תא ופשחת לא .ג
.רישי שמש רואב
.תוטבחל תוללוסה תא ופשחת לא .ד
וא רועה םע עגמב אובל טילורטקלאה לזונל ורשפאת לא .ה
תויומכב עוגנה רוזאה תא ופטש .הפילד לש הרקמב םייניעה
.יאופר עויס תלבקל ונפו עגמ לש הרקמב תולודג םימ
.העילב לש הרקמב יאופר עויס תלבקל דימ ונפ .ו
הללוסה יעגמ תא ובגנ .השביו הייקנ הללוס לע ורמש .ז
.ךולכל לש הרקמב השביו הייקנ תילטמב
תוארוהב דימת ונייע .שומישה ינפל הללוסה תא ןועטל שי .ח
לא .הניעטה תוארוהל םאתהב ולעפו הלעפההו שומישה
.שומישב הניאשכ הללוסה תא ונעטת
וקת רחאל הקירפו הניעט ירוזחמ רפסמב ךרוצ היהיו ןכתיי .ט־
.םייבטימ םיעוציב תגשהל ,שומיש אלל תוכורא ןוסחא תופ
הליגר רדח תרוטרפמטב יבטימ ןפואב תלעופ הללוסה .י
.)20°C ± 5°C(
וניאש ןעטמב שומיש .דבלב קפוסמה ןעטמה תועצמאב ונעט .אי
.הקילד םורגל לולע הללוסה גוסל םיאתמ
םירחא תכתמ יצפחמ שומישב הניאשכ הללוסה תא וקיחרה .בי
יצפחו םיגרב ,םירמסמ ,תוחתפמ ,תועבטמ ,ריינ יבטא ןוגכ
.הללוסה יעגמ תא רצקל םילולעה םירחא םינטק תכתמ
.הקילד וא היווכ םורגל לולע הללוסה יעגמ רוציק
;התוא םיבקנמשכ הללוסהמ ףולדל לולע טילורטקלא לזונ .גי
תולודג םימ תויומכב עוגנה רוזאה תא ופטש .עגממ וענמיה
עגמ לש הרקמב יאופר עויס תלבקל ונפו עגמ לש הרקמב
.םייניעה םע
.הללוסה תנקתה ינפל ילכה יעגמ תאו הללוסה יעגמ תא וקנ .די
ילכ םע שומישל תודעוימ ןניאש תוללוסב ושמתשת לא .וט
.ילמשחה הדובעה
.םידלי לש םדי גשיהמ הללוסה תא וקיחרה .זט
.דיתעב ןויעל ,חוטב םוקמב תרבוחה תא ורמש .זי
.שומישב וניאשכ ילכהמ הללוסה תא וריסה .חי
.הביבסל יתודידי ןפואב הללוסה תא וכילשה .טי
םינוש גוס וא לדוג ,תלוביק ,רוציי לש תוללוס בברעל ןיא .כ
.ןקתהב
דע תירוקמה ותזיראהמ תוללוסה זראמ תא ריסת לא .אכ
.שרדייש
בהל ידכ הללוסה לע )-( סונימו )+( סולפ םינמיסל בל םיש .בכ־
.ןוכנ שומיש חיט

החדקמ/תנעטנ תיטוחלא הגרבמ HE
1
ילכל תויללכ תוחיטב תוארוה
םיילמשח הדובע
:הרהזא
.דיתעב ןויעל ,חוטב םוקמב תרבוחה תא ורמש
הדובעה רוזאב תוחיטב .1
.בטיה ראומו יקנ הדובע רוזא לע ורמש .א
רקב ןוגכ ,תוציפנ תוביבסב םיילמשח הדובע ילכ וליעפת לא .ב־
.קבא וא םיזג ,םיקילד םילזונ תב
הדובע ילכ תלעפה תעב םירחא םישנאו םידלי וקיחרה .ג
.ילמשח
תילמשח תוחיטב .2
םיעקשל םיאתהל םיילמשחה הדובעה ילכ יעקת לע .א
.איהש הרוצ לכב עקתה תא ונשת לא םלועל .םיילמשחה
הדובע ילכ רוביחל םהשלכ םיעקת ימאתמב ושמתשת לא
.םיקראומ םיילמשח
,תורוניצ ןוגכ ,םיקראומ םיחטשמ םע עגממ וענמיה .ב
.םיררקמו לושיב ירונת ,םירוטאידר
.תוחלל וא םשגל םיילמשחה הדובעה ילכ תא ופשחת לא .ג
לבכב ושמתשת לא םלועל .הניזה לבכ לע חוכ וליעפת לא .ד
תא וקיחרה .ילמשחה עקשהמ וקותינל וא ילכה תאישנל
.םיענ םיקלחמ וא םידח תווצקמ ,ןמשמ ,םוחמ לבכה
תעב הנבמל ץוחמ שומישל םיאתמה ךיראמ לבכב ושמתשה .ה
הנבמל ץוחמ ילמשח הדובע ילכ תלעפה.
ילכ תלעפהמ ענמיהל ןתינ אלשכ תחפ קספמב ושמתשה .ו
.החל הביבסב ילמשח הדובע
תישיא תוחיטב .3
תעב ןויגיהב וגהנו םישוע םתאש המל בל ומיש ,םירע ויה .א
הדובע ילכב ושמתשת לא .ילמשח הדובע ילכ תלעפה
לוהוכלא ,םירודכ תעפשה תחת וא םיפייע םתאשכ ילמשח
.תופורת וא
.ןגמ יפקשמ דימת ושבל .ישיא ןגמ דויצב ושמתשה .ב
ינפל יובכ בצמב גתמהש ואדו .היופצ יתלב הלעפה וענמ .ג
.ותאישנ וא ילכה תמרה ,הללוס וא/ו חתמ רוקמל ילכה רוביח
ילכ תלעפה ינפל םיגרב תוחתפמ וא ןונווכ תוחתפמ וריסה .ד
.ילמשחה הדובעה
דימת ורמש .םיקחורמ תומוקמל עיגהל תנמ לע וחתמתת לא .ה
.הביצי הדימע לע
.םיטישכת וא םייופר םידגב ושבלת לא .םאתהב ושבלתה .ו
םיקלח ןיבל םידגבהו רעישה ןיב קחרמ לע דיפקהל שי
.םיענ
םהש אדוול שי קבא באוש רוביחל םימאתמ םיקפוסמשכ .ז
.יוארכ םהב םישמתשמו בטיה םירבוחמ
ות םילכב ףוכת שומיש בקע תורכיה ובש בצממ ענמיהל שי .ח־
.םילכה לש תוחיטבה תונורקעמ תומלעתהלו תוננאשל ליב
הקוזחתו שומיש .4
ילכב ושמתשה .ילמשחה הדובעה ילכ לע חוכ וליעפת לא .א
.המישמל םיאתמה ילמשחה הדובעה
ליעפמ וניא גתמה םא ילמשחה הדובעה ילכב ושמתשת לא .ב
.ותוא הבכמ וא
הללוסה תא ואיצוה וא/ו חתמה רוקממ עקתה תא וקתנ .ג
תפלחה ,םהשלכ םינוויכ עוציב ינפל ילמשחה הדובעה ילכמ
.ןוסחא וא םירזיבא
גשיהמ קחרה שומישב םניאש םיילמשח הדובע ילכ ונסחא .ד
פהב םיאיקב םניאש םישנאל ורשפאת לאו םידלי לש םדי־
.ותוא ליעפהל הלא תוארוהב וא ילמשחה הדובעה ילכ תלע
םיקלח רחא וקדב .םיניקת םיילמשח הדובע ילכ לע ורמש .ה
רחא יאנת לכו םירובש םיקלח ,םיפפוכמ וא םימוקע םיענ
וגאד .ילמשחה הדובעה ילכ תלועפ לע עיפשהל לולעה
.וב שומישה ינפל םוגפ ילמשח הדובע ילכ ןוקיתל
.םייקנו םידח ךותיח ילכ לע ורמש .ו
'דכו םיטיבב םירזיבאב ,ילמשחה הדובעה ילכב ושמתשה .ז
הדובעה יאנתב תובשחתה ךות ,הלא תוארוהל םאתהב
.עוציבל הדובעה תוהמבו
םייקנ ,םישבי הזיחאה יחטשמ לעו תוידיה לע רומשל שי .ח
.זירג וא ןמש אללו
ותקוזחתו הללוס לעפומ הדובע ילכב שומיש .5
דבלב ןרציה י"ע קפוסמה ןעטמה תועצמאב ונעט .א.
.דבלב ול תודעוימה תוללוס םע הדובעה ילכב ושמתשה .ב
םייתכתמ םיצפחמ ,שומישב הניאשכ ,הללוסה תא וקיחרה .ג
םיגרב ,םירמסמ ,תוחתפמ ,תועבטמ ,ריינ יבטא ןוגכ םירחא
ןיב עגמ רוציל םילולעה ,םירחא םינטק םייתכתמ םיצפח וא
.הללוסה יבטוק ינש
;הנממ ףולדל לולע הללוסה לזונ םיינוציק שומיש יאנתב .ד
.גגושב עגמ לש הרקמב םימב דימ ופטש .עגממ וענמיה
.םייניעה םע עגמ לש הרקמב יאופר עויס תלבקל ונפ ,ףסונב
רבעש וא םגפנש ילכב וא תוללוס זראמב שמתשהל ןיא .ה
.םייוניש



Copyright © 2020, Positec. All Rights Reserved.
AR01517300
www.worx.com
This manual suits for next models
4
Table of contents
Languages:
Other Worx Drill manuals