Worx LANDROID L WG792E User manual

INSTALLATION
GUIDE

Installation guide EN P04
Installationsanleitung D P18
Guide d'installation F P32
Guida d'installazione I P46
Guía de instalación ES P60
Guia de instalação PT P74
Instalační příručka CZ P88
Inštalačná príručka SK P102
Installationsvejledning DK P116
Instrukcja instalacji PL P130

4
EN
How to install your Landroid®L
The installation of the Landroid
®
L is easy. Depending on the size of your garden, the entire process only takes
a short amount of time. If your are like us, you hate having to waste your precious free time mowing your lawn.
The Landroid
®
L will prove to be your best investment eliminating the need to mow your lawn ever again.
You can watch the installation demo video at www.worxlandroid.com.
The Landroid®L loves to mow
It is designed to mow often, maintaining a healthier and better looking lawn than ever before. Depending on the
size of your lawn, the Landroid
®
L may be programmed to operate at any time or frequency with no restrictions. It
is here to work for you.
Operating costs
Worried about your electricity bill? Let’s do the math: if you let your Landroid
®
L work 3 hours a day, 5 days a week,
25 weeks a year, your Landroid
®
L will cost you approximately £4 in electricity*.Yes, £4 a year. A fraction of what
you would spend in petrol for your noisy, polluting petrol mower.
* Source: www.energy.eu

5
EN
Preparation
In the box
From your shed
Distance gauge
Hex key
Scissors Hammer
Landroid®LCharging base
Base
retention
pegs
Wire pegs
Boundary
wire reel
Owner’s manual
Warranty
statement
Installation
guide
Spare blades
Power cord
with AC/DC
transformer
Programming and
trouble shooting
guide

6
EN
Landroid®L's new home-your garden
Let's start by having a closer look at Landroid
®
L's new home—your lawn—highlighting the areas where it can safely
go and areas it’s best for Landroid
®
L to avoid.
When hitting any obstacle that’s rigid, stable and taller than
15cm—such as a wall or a fence—your Landroid®L will simply
stop and re-direct away from the obstacle.
Obstacles that can be hit
Stones that are heavy enough not to be moved by your
Landroid®L can be safely hit. However, if any stone has an
inclined surface that your Landroid®L can climb, you should
either remove it or exclude from the working area.
Stones
If your driveway is level with your lawn, without any protruding
surface, the Landroid®L can freely run over it. If you'd like the
Landroid®L to avoid it, then only a 10cm* space between the
Boundary Wire and the driveway is needed.
If it’s covered with gravel, you should not allow the Landroid®L
to travel over it, using the distance gauge in this case, keeping a
45cm* space between the boundary wire and the driveway.
*This is the recommended distance. Use the provided distance
gauge to ensure proper installation.
Driveways
You certainly don’t want your Landroid®L to mow your flowers,
or fall into the water. These areas should be avoided.
Flowerbeds, ponds, pools...

7
EN
If there are roots emerging from the ground, this area should be
avoided in order not to damage the roots.
Trees
In the case of large bumps or dips, please consider if the blades
could touch the ground; if this is the case, either make the
inclines smoother or exclude those areas from your Landroid®L’s
operation.
Depressions and bumps
Your Landroid®L has the ability to safely climb slopes up to 35%
(20°), so just avoid anything steeper than this.
Slopes
35% (20°)
The Upper Boundary Wire should NOT be placed on slopes
steeper than 35% (20°).The Upper Boundary Wire should have
a distance of at least 35cm between any obstacles.The Lower
Boundary Wire should NOT be placed on slopes steeper than
25% (15°).The Lower
Boundary Wire should have a distance of at least 45cm between
any obstacles when it is positioned on a slope that is 25%.
Placement of Boundary Wire on slopes
Upper boundary wire
Lower boundary wire
Lower boundary
Wire

8
EN
Marking out Landroid®L’s
territory within your garden
Your Landroid
®
L needs to know where to mow.This is why you have to mark its working area with a boundary
wire that will form an invisible fence.This wire will also guide your Landroid
®
L to its charging base.
If your neighbor also uses a Landroid
®
L, then you must keep a space of at least 2metres between your Boundary
Wire and your neighbors.
Please be aware that your Landroid
®
L will not be able to receive
a signal from the Boundary Wire beyond the distance of 25m.
The charging base should be placed along a straight line—allow
2 meters at both the front and the back. If possible, place the
charging base in the shade—batteries are better recharged in a
cool place.
First of all, locate the best spot for the charging base, taking
into account where your nearest outdoor electricity socket is.
The charging base has a 15m power cord.
NOTE: Make sure the transformer and the electrical socket
are kept in a dry area at all times.
An island is an area that sits inside your lawn where you don't
want Landroid®L to go. The boundary wire starts from the
mowing boundary, goes straight to the island, around it and
back to the boundary as shown by the arrows on the picture.
Make sure it is on a flat area, clear of any obstacles.

9
EN
A forbidden area that's close to the mowing boundary should
be a part of the boundary itself, as shown in the picture.
If your lawn has two or more separate areas connected to each
other by means of a corridor, this should be at least 1 meters
wide.
In the case of two islands that are close to each other, it would
be convenient to lay out the wire as illustrated above.
The Landroid®L can travel freely over the boundary wire in
between the islands and the mowing boundary.
If your lawns are not connected by a corridor that's wide
enough, then you'll have to pick your Landroid®L up and move
it to the other lawn. Landroid®L will mow this lawn no problem,
but you'll have to bring it back to the charging base when the
battery runs out.

10
EN
Place the Charging Base in its designated spot, without fixing it
permanently. The “IN” arrow should be oriented so that it indicates
the inside of your lawn.
Feed the boundary wire through the tunnel underneath the charging
base.
Leaving about 1 meter in length of extra wire, start from the rear of
your charging base and begin pegging the wire along the boundary.
When you’ve finished laying the wire along the boundary back to
the charging base, leave another meter of extra wire and then cut it.
Pegging your boundary wire
Installation
We recommend that you first mow the lawn where the wire is to be laid using a normal lawn mower or a
grass trimmer.This ensures that the wire is laid as close to the ground as possible so the Landroid
®
L does
not accidentally cut the wire. The boundary wire is powered with a very low voltage so that it is totally safe to
human beings and pets.
1
2
3