Worx WP733E Operation instructions

WP733E WP733E.X
P08
P18
P30
P41
P52
P64
P75
P86
P95
P106
P115
P128
P141
P152
P163
P174
P184
CordlessLawnMower
SchnurloserRasenmäher
Tondeuse à gazon sans fil
Tosaerba senza fili
Cortacésped a batería
Corta-relva sem fios
Snoerloze graasmaaier
Ledningsfri plæneklipper
Batteridrevet gressklipper
Sladdlös gräsklippare
Bezprzewodowa kosiarka do trawników
 μ μ
Vezetékmentes fűnyíró
Maşină de tuns iarba fără fir
Bezdrátová travní sekačka
Akumulátorová kosačka na trávu
Brezžična kosilnica
EN
D
F
I
ES
PT
NL
DK
NOR
SV
PL
GR
HU
RO
CZ
SK
SL

Original Instruction
Originalbetriebsanleitung
Notice originale
Istruzioni originali
Manual original
Manual original
Oorspronkelijke gebruiksaanwijzing
Original brugsanvisning
Original driftsinstruks
Bruksanvisning i original
Instrukcja oryginalna
 Ω ΩΩ ΔΩ
Eredeti használati utasítás
Instrucţiuni originale
Původní návod k používání
Pôvodný návod na použitie
Izvirna navodila
EN
D
F
I
ES
PT
NL
DK
NOR
SV
PL
GR
HU
RO
CZ
SK
SL

1
3
4
5
6
7
8
10
11
12
9
2

A1 A2
A3 A4
1
2
B2B1
12

13
14
100%
0%
E1
D2
D1
C1
C2
1
2
B3

I
H
G2
a
b
0%
100%
1
2
12
L
F
G1
3
2
1
70mm
50mm
30mm
2
1
E2
1
2

L-1
L-2
L-3
15 14
K-1
K-2
K-3
L
K
M1
L
J2
O2
M2
L
J1
1
2

8
Cordless Lawn Mower EN
TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS
2. COMPONENT LIST
3. TECHINCAL DATA
4. INTENDED USE
5. OPERATION INSTRUCTIONS
6. MAINTENANCE
7. STORAGE
8. ENVIRONMENTAL PROTECTION
9. TROUBLESHOOTING
10. DECLARATION OF CONFORMITY
1. SAFETY INSTRUCTIONS
PRODUCT SAFETY
GENERAL SAFETY WARNINGS
WARNING Read all
safety warnings and all
instructions. Failure to follow
the warnings and instructions
may result in electric shock,
fire and/or serious injury.
Carefully read the
instructions for the safe
operation of the machine.
Save all warnings and
instructions for future
reference.
- This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities,
or lack of experience
and knowledge, unless
they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
- Children should be
supervised to ensure that
they do not play with the
appliance.
- The appliance is only to be
used with the power supply
unit provided with the
appliance.
IMPORTANT
READ CAREFULLY BEFORE
USE
KEEP FOR FUTURE
REFERENCE
Safe operation practices
Training
a) read the instructions
carefully. Be familiar with
the controls and the proper
use of the equipment;
b)never allow children or
people unfamiliar with
these instructions to
use the lawnmower. Local
regulations can restrict the
age of the operator;
c)never mow while people,
especially children, or pets
are nearby;
d) keep in mind that the
operator or user is
responsible for accidents

9
Cordless Lawn Mower EN
or hazards occurring
to other people or their
property.
Preparation
a) While mowing, always
wear substantial footwear
and long trousers. Do not
operate the equipment
when barefoot or wearing
open sandals;
b) thoroughly inspect the
area where the equipment
is to be used and remove
all objects which can be
thrown by the machine;
c) Before using, always
visually inspect to see that
the blades, blade bolts and
cutter assembly are not
worn or damaged. Replace
worn or damaged blades
and bolts in sets to preserve
balance. Replace damaged
and unreadable labels.
Operation
a) mow only in daylight or in
good artificial light;
b) avoid operating the
equipment in wet grass,
where feasible;
c) always be sure of your
footing on slopes;
d) walk, never run;
e) for wheeled rotary
machines, mow across the
face of slopes, never up
and down;mow across the
face of slopes, never up and
down.
f) exercise extreme caution
when changing direction on
slopes;
g) do not mow excessively
steep slopes;
h) use extreme caution when
reversing or pulling the
lawnmower towards you;
i) stop the blade(s) if the
lawnmower has to be
tilted for transportation
when crossing surfaces
other than grass, and
when transporting the
lawnmower to and from the
area to be mowed;
j) never operate the
lawnmower with defective
guards , or without safety
devices, for example
deflectors and/or grass
catchers, in place;
k) switch on the motor
carefully according to
instructions and with feet
well away from the blade(s);
l) do not tilt the lawnmower
when switching on the
motor, except if the
lawnmower has to be tilted
for starting. In this case,

10
Cordless Lawn Mower EN
do not tilt it more than
absolutely necessary and
lift only the part which is
away from the operator;
m)do not put hands or feet
near or under rotating parts.
Keep clear of the discharge
opening at all times;
n) not to touch the blades
before the disabling device
has been removed and
the blades have come to a
complete stop;
o) Do not start the lawnmower
when standing in front of
the discharge opening.
p) Do not transport the
lawnmower while the power
source is running.
q) Stop the lawnmower,and
remove the disabling
device. Make sure that all
moving parts have come to
a complete stop.
– whenever leaving the
machine unattended,
– before clearing a blockage,
– before checking, cleaning
or working on the machine,
– after striking a foreign
object. Inspect the
machine for damage
and make repairs before
restarting and operating the
lawnmower
If the lawnmower starts to
vibrate abnormally (check
immediately)
- inspect for damage.
- replace or repair any
damaged parts.
- check and tighten any loose
parts.
Maintenance and storage
a) keep all nuts, bolts and
screws tight to be sure
the equipment is in safe
working condition;
b) check the grass cacher
frequently for wear or
deterioration;
c)replace worn or damaged
parts for safety. Use only
genuine replacement parts
and accessories.
d) Be careful during adjusting
of the lawnmower to
prevent entrapment of the
fingers between moving
blades and fixed parts of
the lawnmower.
e) Always allow the
lawwnmower to cool down
before storing.
f) When servicing the blades
be aware that, even though
the power source is
switched off, the blades can
still be moved.
SAFETY WARNINGS FOR

11
Cordless Lawn Mower EN
BATTERY PACK
a)Do not dismantle, open
or shred cells or battery
pack.
b)Do not short-circuit a
battery pack. Do not
store battery packs
haphazardly in a box or
drawer where they may
short-circuit each other
or be short-circuited by
conductive materials.
When battery pack is not
in use, keep it away from
other metal objects, like
paper clips, coins, keys,
nails, screws or other small
metal objects, that can
make a connection from
one terminal to another.
Shorting the battery
terminals together may
cause burns or a fire.
c)Do not expose battery
pack to heat or fire.
Avoid storage in direct
sunlight.
d)Do not subject battery
pack to mechanical
shock.
e) In the event of battery
leaking, do not allow
the liquid to come into
contact with the skin or
eyes. If contact has been
made, wash the affected
area with copious
amounts of water and
seek medical advice.
f) Keep battery pack clean
and dry.
g)Wipe the battery pack
terminals with a clean
dry cloth if they become
dirty.
h)Battery pack needs to
be charged before use.
Always refer to this
instruction and use
the correct charging
procedure.
i) Do not maintain battery
pack on charge when not
in use.
j) After extended periods
of storage, it may be
necessary to charge and
discharge the battery
pack several times
to obtain maximum
performance.
k)Recharge only with the
charger specified by
Worx. Do not use any
charger other than that
specifically provided for
use with the equipment.
l) Do not use any battery
pack which is not
designed for use with the
equipment.
m)Keep battery pack out of

12
Cordless Lawn Mower EN
the reach of children.
n)Retain the original
product literature for
future reference.
o)Remove the battery from
the equipment when not
in use.
p)Dispose of properly.
q)Do not mix cells of
different manufacture,
capacity, size or type
within a device.
r) Keep the battery away
from microwaves and
high pressure.
SYMBOLS
Read instruction handbook before
operation this machine
Keep bystanders away.
Beware of sharp blades. Blades
continue to rotate after the motor
is switched off- Remove disabling
device before maintenance
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
Do not burn
Li-Ion battery This product has been
marked with a symbol relating to
‘separate collection’ for all battery
packs and battery pack. It will
then be recycled or dismantled in
order to reduce the impact on the
environment. Battery packs can be
hazardous for the environment and
for human health since they contain
hazardous substances.
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your Local
Authority or retailer for recycling
advice.
Wear protective gloves.
Remove battery from the socket
before carrying out any adjustment,
servicing or maintenance.
Remove the key
Blade continues to rotate after
the machine is switched off. Wait
until all machine components have
completely stopped before touching
them.
2. COMPONENT LIST
1. SAFETY LOCK-OUT BUTTON
2. BAIL HANDLE
3. UPPER HANDLE
4. HANDLE KNOB, UPPER
5. BAG HANDLE
6. SAFETY FLAP
7. GRASS COLLECTION BAG

13
Cordless Lawn Mower EN
8. HANDLE KNOB, LOWER
9. CARRY HANDLE
10. BATTERY PACK COVER
11. GRASS BAG INDICATOR
12. LOWER HANDLE
13. BATTERY PACK* (SEE FIG. E1)
14. SAFETY KEY (SEE FIG. E1)
15. BLADE BOLT (SEE FIG. M1)
16. BLADE (SEE FIG. M1)
*Not all the accessories illustrated or described
are included in standard delivery.
3. TECHNICAL DATA
Type WP733E WP733E.X (7- designation of
machinery, representative of Cordless Lawn
Mower)
WP733E WP733E.X **
Voltage 20V Max.***
No load speed 3500 /min
Deck diameter 32 cm
Cutting diameter 30 cm
Front wheel diameter 140 mm
Rear wheel diameter 160 mm
Cutting height 30 - 70 mm
Cutting height positions 3
Grass collection capacity 30 L
Battery type Lithium-Ion
Machine Weight
(bare tool) 8.6 kg
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
Category Type Capacity
20V Battery WA3014 4.0 Ah
WA3570 5.0 Ah
20V Charger WA3880 2.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose
the type according to the work you intend to
undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
NOISE DATA
A weighted sound pressure LpA = 81.3 dB(A)
KpA 3.0 dB (A)
A weighted sound power LwA = 94.9 dB(A)
KwA 1.0 dB (A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration ah< 2.5 m/s²
Uncertainty K = 1.5 m/s²
WARNING The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total

14
Cordless Lawn Mower EN
working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
4. INTENDED USE
This product is intended for domestic lawn mowing.
5. OPERATION INSTRUCTION
NOTE: Read instruction handbook before
operation this machine.
ASSEMBLY & OPERATION
ACTION FIGURE
ASSEMBLY
Assembling the handle bar See Fig.
A1-A4
Assembling the grass collection
bag See Fig. B1-B3
Fitting the grass collection bag to
the lawn mower
NOTE: Depress the grass
collection bag slightly to ensure
that it is completely installed.
See Fig. C1,
C2
Checking the battery charge
condition
NOTE: Fig. D1 only applies for the
battery pack with battery indicator
light.
See Fig. D1
Charging the battery pack
More details can be found in
charger’s manual. See Fig. D2
Fitting / removing battery
Insert the safety key before
installing the battery pack. See Fig. E1, E2
OPERATION
Starting & stopping See Fig. F
Adjusting the cutting height
Remove the battery pack. Flip the
mower over. Grip one wheel and
pull or push it forward. Make sure
to pull it forward far enough that it
is able to be move up/down in the
wheel bracket. With the wheel in its
most forward position, slide it up
or down into the desired position.
Repeat the above steps to all four
wheels. Make sure all four wheels
are in the same cutting height.
WARNING! Stop, release
Operating Bail and wait until
the motor stops before adjusting
height. The blades continue
to rotate after the machine is
switched off, a rotating blade can
cause injury. Do not touch rotating
blades.
See Fig. G1,
G2
Grass bag filling indicator
Empty status: flap floats (a)
Fully status: flap falls down (b)
See Fig. H
Removing / emptying grass
collection bag
WARNING! Always check the
safety flap close the discharge
outlet before using. Never lift the
safety flap when the lawn mower
is being used without fitted grass
collection bag.
See Fig. I
Storage See Fig. J1, J2
MOWING TIPS
NOTE: ALWAYS INSPECT AREA WHERE MOWER IS
TO BE USED AND REMOVE ALL STONES, STICKS,
WIRE, METAL AND OTHER DEBRIS WHICH MIGHT
BE THROWN BY THE ROTATING BLADE.
1. Mow across the face of slopes, never up-and-down.
Exercise extreme caution when changing direction
on slopes. Do not mow excessively steep slopes.
Always maintain good footing.
2. Release bail handle to turn mower “OFF” when
crossing any graveled area (stones can be thrown
by the blade).
3. Set mower at highest cutting height when mowing
in rough ground or in tall weeds. Removing too
much grass at one time can cause circuit breaker
to trip, which stops mower.

15
Cordless Lawn Mower EN
4. If a grass bag is used during the fast growing
season, the grass may tend to clog up at the
discharge opening. Release bail handle to turn
mower “OFF” and remove the safety key. Remove
the grass bag and shake the grass down to the
back end of the bag. Also clean out any grass or
debris which may be packed around the discharge
opening. Replace the grass collection bag.
5. If mower should start to vibrate abnormally, release
bail handle to turn mower “OFF” and remove safety
key. Check immediately for cause. Vibration is a
warning of trouble. Do not operate mower until a
service check has been made.
6. ALWAYS RELEASE BAIL HANDLE TO TURN
MOWER “OFF” AND REMOVE SAFETY KEY WHEN
LEAVING IT UNATTENDED EVEN FOR A SHORT
PERIOD OF TIME.
CUTTING AREA
The cutting area can be affected by several factors,
such as cutting height, lawn humidity, grass length
and density. Besides, starting and stopping the mower
too many times during operation will reduce the
cutting area.
The table below gives the relationship between cutting
conditions and cutting area.
Cutting Height Cutting Area
(maximum)
Cutting 7 cm to 5 cm 200m
2
(4.0Ah battery)
TIPS:
1) It is recommended to mow your lawn more
frequently, walk at normal pace, and not to start/
stop the mower too often during operation.
2) For best performance, please ensure use two fully
charged battery packs at the same time and always
cut off 1/3 or less of the grass height.
3) Walk slowly when cutting long grass, so as to have
more effective cutting and properly discharge the
clippings.
4) Avoid cutting wet grass, otherwise it will stick to the
underside of the deck and the clippings cannot be
collected or discharged properly.
5) A higher cutting height shall be applied to new or
thick grass and it will extend the battery duration.
6. MAINTENANCE
WARNING: Stop the mower, remove the safety
key and battery before removing the grass
collection bag.
NOTE To ensure long and reliable service, perform the
following maintenance procedures regularly. Check for
obvious defects such as a loose, dislodged or a damaged
blade, loose fittings, and worn or damaged components.
Check that the covers and guards are all undamaged and
are correctly attached to mower. Carry out any necessary
maintenance or repairs before operating mower. If the
mower should happen to fail despite regular mainte-
nance, please call our customer helpline for advice.
BLADE SHARPENING
KEEP BLADE SHARP FOR BEST MOWER PERFORMANCE. A
DULL BLADE DOES NOT CUT GRASS CLEANLY OR MULCH
PROPERLY.
WEAR PROPER EYE PROTECTION WHILE REMOVING,
SHARPENING, AND INSTALLING BLADE. ENSURE THAT
SAFETY KEY AND BATTERIES ARE REMOVED.
Sharpening the blade twice during a mowing season is
usually sufficient under normal circumstances. Sand
causes the blade to dull quickly. If your lawn has sandy
soil, more frequent sharpening may be required.
REPLACE BENT OR DAMAGED BLADE IMMEDIATELY.
WHEN SHARPENING THE BLADE
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of blade to keep
it balanced, removing equal amounts of material from
both ends.
NOTE
1. Be sure the mower is turned off . Remove the key and
batteries.
2. Place the mower in stand up storage mode.
TO SHARPEN BLADE IN A VISE (SEE Fig. K)
1. Be sure the bail handle is released, the blade has
stopped and the safety key and battery removed
before removing the blade.
2. Remove blade from mower. See instructions for
removing and attaching blade.
3. Secure blade K-1 in a vise K-2.
4. Wear safety glasses and be careful not to cut your-
self.
5. Carefully file the cutting edges of the blade with a
fine tooth file K-3 or sharpening stone.
6. Check balance of blade. See instructions for blade
balancing.
7. Replace blade on mower and tighten securely. Refer
to instructions below.
BLADE BALANCING (See Fig. L)
Check balance of blade by placing center hole in blade
L-1 over a screwdriver shank L-2, clamped horizontally
in a vise L-3. If either end of the blade rotates downward,
file that end. Blade is properly balanced when neither
end drops.
BLADE MAINTENANCE (See Fig. M1, M2)
Replace yourMower Blade after 50 hours mowing or 2
years, which ever is the sooner-regardless of condition.
Follow these procedures to remove and replace the
Blade. You will need garden gloves (not provided) and
a spanner wrench (not provided) to remove the Blade.

16
Cordless Lawn Mower EN
Make sure safety key and batteries are not installed.
Wedge a block of wood between the blade and the
mower deck to prevent the blade from turning and un-
screw the Blade Bolt counter-clockwise using a spanner
wrench, and then remove the Blade.
To re-assemble, position the Blade with the cutting
edges towards the ground. Then securely tighten the
Blade Bolt.
7. STORAGE SEE FIG. J1, J2
Stop the mower, and always remove the Safety Key and
batteries. Clean the exterior of the machine thoroughly
using a soft brush and cloth. Do not use water, solvents
or polishes. Remove all grass and debris, especially from
the ventilation slots.
Turn the machine on its side and clean the blade area. If
grass cuttings are compacted in the blade area, remove
with a wooden or plastic implement.
Store the machine in a dry place. Do not place other
objects on top of the machine.
8. ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
9. TROUBLESHOOTING
PROBLEM SOLUTION
1. Mower
doesn’t
run when
Operating Bail
is activated.
A. Check to make sure safety key
has been installed and is fully
seated and that Safety lock-out
button is completely pushed.
B. Release Operating Bail to turn
mower off. Remove safety key and
batteries, turn mower over and
check that blade is free to turn. If
not free, return to an authorized
servicer. Blade should turn freely.
C. Has battery been fully charged?
Plug in charger and wait for green
light to come on.
2. Motor stops
while mowing. A. Release Operating Bail to turn mower off. Remove safety key and
batteries,turn mower over and
check that blade is free to turn. If
not free, return to an authorized
servicer. Blade should turn freely.
B. Raise cutting height of wheels
to highest position and start
mower.
C. Has battery been fully charged?
Plug in charger and wait for green
light to come on.
D. Avoid overloading the mower.
Slow down the cutting pace by
pushing mower slower or raise the
cut height. Or both.
3. Mower runs
but cutting
performance is
unsatisfactory,
or does not cut
entire lawn.
A. Has battery been fully charged?
Plug in charger and wait for green
light to come on.”
B. Release Operating Bail to turn
mower off. Remove safety key and
batteries. Turn mower over and check:
Blade for sharpness - Keep blade
sharp. Deck and discharge chute for
clogging.
C. Wheel height adjustment may be
set too low for grass condition. Raise
cutting height.
4. Mower is too
hard to push. A. Raise cutting height to reduce deck drag on grass. Check each
wheel for free rotation.
5. Mower is
abnormally
noisy and
vibrates.
A. Release Operating Bail to turn
mower off. Remove safety key
and batteries. Turn mower on
side and check blade to ensure it
has not been bent or damaged.
If blade is damaged, replace
with a replacement blade. If the
underside of the deck is damaged
return mower to an Authorized
service center.
B. If there is no visible damage
to the blade and the mower still
vibrates: Release Operating Bail to
turn mower off, Remove safety key
and batteries, and remove blade.
Rotate blade 180 degrees and
retighten. If mower still vibrates,
return the mower to an authorized
service center.
6. Battery
charger LED’s
not on.
A. Check plug connection.
B. Replace charger.

17
Cordless Lawn Mower EN
7. Battery
charger LED
does not flip to
green.
A. Battery needs to be diagnosed.
Take to authorized service center.
8. Mower not
picking up
clippings with
the Grass
Collection Bag.
A. Remove mulch plate when
bagging.
B. Chute clogged. Release
Operating Bail to turn mower off.
Remove safety key and batteries.
Clear chute of grass clippings.
C. Too much cut grass. Raise
cutting height of wheels to
shorten length of the cut.
D. Bag full. Empty bag more often.
9. When
mulching there
are clippings
visible.
A. Too much cut grass. Raise
cutting height of wheels to
shorten length of the cut. Do
not cut off more than 1/3 of total
length.
B. Check blade for sharpness.
Always keep blade sharp.
10. Low or
diminished
run-time after
many uses
A. Return to Authorized Service
location - may need new battery.
11. The battery
charger LED
flashes red
and the battery
can’t be
charged.
A. The battery overheats after
continuous use. Remove battery
from the charger and allow it to
cool to 42°C or less.
10. DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
On behalf of Positec declare that the product
Description Worx Cordless Lawn Mower
Type WP733E WP733E.X (7- designation of
machinery, representative of Cordless Lawn
Mower)
Function mowing grass
Complies with the following Directives,
2006/42/EC, 2014/30/EU
2011/65/EU&(EU)2015/863
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC
Conformity assessment procedure as per Annex VI.
Measured Sound Power Level 94.9 dB(A)
Declared Guaranteed Sound Power Level 96 dB(A)
The notified body involved
Name: Intertek, Deutschland GmbH (notified
body 0905)
Address: Stangenstraße 1, 70771 LEINFELDEN-
ECHTERDINGEN
Standards conform to,
EN 60335-1, EN 60335-2-77, EN 62233, EN ISO 3744,
EN 55014-1, EN 55014-2
The person authorized to compile the technical file,
Name: Marcel Filz
Address Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
2021/11/12
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

18
Schnurloser Rasenmäher D
INHALTSVERZEICHNIS
1. SICHERHEITSHINWEISE
2. KOMPONENTEN
3. TECHNISCHE DATEN
4. BESTIMMUNGSGEMÄSSER GEBRAUCH
5. HINWEISE ZUM BETRIEB
6. WARTUNG
7. LAGERUNG
8. UMWELTSCHUTZ
9. STÖRUNGSBEHEBUNG
10. KONFORMITÄTSERKLÄRUNG
1. SICHERHEITSHINWEISE
PRODUKTSICHERHEIT
ALLGEMEINE
SICHERHEITSHINWEISE
WARNUNG Lesen Sie
alle
Sicherheitshinweise und
Anweisungen. Versäumnisse
bei der Einhaltung der
Sicherheitshinweise und
Anweisungen können
elektrischen Schlag, Brand
und/oder schwere
Verletzungen verursachen.
Lesen Sie die
Bedienungsanleitung
zum sicheren Betrieb des
Gerätes aufmerksam durch.
Bewahren Sie alle
Sicherheitshinweise und
Anweisungen für die
Zukunft auf.
- Dieses Gerät ist nicht dafür
bestimmt, durch Personen
(einschließlich Kinder)
mit eingeschränkten
physischen, sensorischen
oder geistigen Fähigkeiten
oder mangels Erfahrung
und/oder mangels Wissen
benutzt zu werden, es sei
denn, sie werden durch
eine für ihre Sicherheit
zuständige Person
beaufsichtigt oder erhielten
von ihr Anweisungen, wie
das Gerät zu benutzen ist.
- Kinder sollten beaufsichtigt
werden um Sicherzustellen,
dass sie nicht mit dem
Ladegerät spielen.
- Das Gerät darf nur mit dem
mitgelieferten Netzteil
verwendet werden.
WICHTIG
VOR GEBRAUCH BITTE
GENAU DURCHLESEN
FÜR SPÄTERE BEZUGNAHME
AUFBEWAHREN
Sicherer Betrieb
Training
a) Die Anweisungen
aufmerksam durchlesen.
Machen Sie sich mit den
Bedienelementen und
dem vorschriftsmäßigen
Gebrauch des Rasenmähers
vertraut.
b) Niemals Kindern oder

19
Schnurloser Rasenmäher D
mit diesen Anweisungen
nicht vertrauten Personen
erlauben, den Rasenmäher
zu benutzen. Nationale
Vorschriften können das
Alter der Bedienperson
möglicherweise
beschränken.
c) Niemals mähen,
während sich Personen,
insbesondere Kinder, oder
Tiere in unmittelbarer Nähe
aufhalten.
d) Bedenken Sie, dass der
Bediener oder Benutzer bei
Unfällen oder Gefährdungen
anderer Personen oder
deren Eigentum die
Verantwortung trägt!
Vorbereitung
a) Tragen Sie beim Mähen
stets festes Schuhwerk
und eine lange Hose. Den
Rasenmäher nicht barfuß
oder mit offenen Sandalen
benutzen.
b) Inspizieren Sie die Gegend,
in der die Ausrüstung
eingesetzt werden soll,
gründlich und entfernen Sie
alle Objekte, die durch die
Maschine aufgeschleudert
werden könnten.
c) Vor der Benutzung immer
durch Augenschein
prüfen, ob Messer,
Messerschrauben und
Schneidbalken abgenutzt
oder beschädigt sind.
Abgenutzte Messer und
Schrauben nur im ganzen
Satz auswechseln, um
Unwuchten zu vermeiden.
Tauschen Sie beschädigte
und unleserliche Etiketten
aus.
Betrieb
a) Nur bei Tageslicht oder
gutem künstlichen Licht
mähen.
b) Nach Möglichkeit nicht in
nassem Gras arbeiten.
c) Auf schrägen Flächen stets
auf sicheren Tritt achten.
d) Gehen Sie; rennen Sie
niemals mit dem Gerät;
e) Mähen Sie bei
Rotormaschinen mit Rädern
Abhänge niemals auf hinaus
oder hinab, sondern immer
seitlich am Hang entlang;
f) Beim Richtungswechsel
an Abhängen äußerst
vorsichtig sein.
g) Keine besonders steilen
Abhänge mähen.
h) Beim Rückwärtsgehen oder
Ziehen des Rasenmähers
äußerst vorsichtig sein.
i) Die Messer müssen stehen,

20
Schnurloser Rasenmäher D
wenn der Rasenmäher
für den Transport gekippt
werden muss, wenn nicht
mit Gras bepflanzte Flächen
überquert werden und beim
Transport vom und zu dem
zu mähenden Bereich.
j) Den Rasenmäher auf
keinen Fall mit defekten
Schutzvorrichtungen oder
Schutzblechen, oder ohne
ordnungsgemäß montierte
Sicherheitseinrichtungen
wie z. B. Prallbleche und/
oder Grasfangvorrichtung
betreiben.
k) Den Motor wie in den
Anweisungen beschrieben
starten und dabei darauf
achten, dass die Füße
ausreichend weit von den
Messern entfernt sind.
l) Den Rasenmäher beim
Starten des Motors nicht
kippen, es sei denn,
es ist für das Anlaufen
erforderlich. In diesem
Fall nur so weit wie nötig
und nur auf der Bediener
abgewandten Seite kippen.
m) Hände und Füße nicht
in die Nähe oder unter
rotierende Teile bringen.
Bei Rotormäher die
Austragsöffnung unbedingt
freihalten.
n) Sie dürfen die Klingen
nicht berühren, bevor die
Sperrvorrichtung entfernt
worden ist und die Klingen
vollständig zum Stillstand
gekommen sind;
o) Starten Sie den
Rasenmäher nicht, wenn
Sie vor der Auslassöffnung
stehen.
p) Transportieren Sie den
Rasenmäher nicht, wenn die
Stromquelle eingeschaltet
ist.
q) Stoppen Sie den
Rasenmäher und
entfernen Sie die
Deaktivierungsvorrichtung .
Stellen Sie sicher, dass
die beweglichen Teile zum
vollständigen Stillstand
gekommen sind.
– Sie die Maschine
unbeaufsichtigt lassen,
– Sie ein Hindernis
wegräumen,
– Sie die Maschine
überprüfen, säubern oder
an der Maschine arbeiten,
– nach der Kollision mit
einem Fremdkörper.
Den Rasenmäher
auf Beschädigungen
untersuchen und wenn
notwendig instand setzen
lassen