Wowitoys SPACE RACER 2 User manual

SPACE RACER 2
H4816
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
The product user guide contains product features, how to use, and the
operating procedure. Read the user manual carefully to get the best
experience and avoid unnecessary damage. Keep this manual for future
reference. If you have any questions or comments about the device, please
contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Disclaimer & Warnings
Please read this Disclaimer & Warning and Safety Guidelines carefully before
using our product. This product is not recommended for people under the
age of 14. By using this product, you hereby agree to this disclaimer and
signify that you have read it fully. You agree that you are responsible for
your own conduct and any damages caused while using this product, and its
consequences. Youagree to use this product only for purposes that are
proper and in accordance with local regulations, terms and all applicable
polices and guidelines WOWITOYS may make available.
When using this product, please be sure to strictly abide by the specification
requirements and safety guidelines stated in this document. Any personal
injury property damage, legal disputes and all other adverse events caused
by the violation of the safety instructions or due to any other factor, will not
be WOWITOYS'sresponsibility.

3
•The drone is designed for 14+
•Adult supervision is always advisable with any from of flying toy
Always ensure your flight area is free of all obstacles before taking off,
and ensure the drone is always flown in excess of 1.5 meters from
yourself and others
•Remove all batteries from the drone and controller when not in use
•Never overcharge
•Never leave to charge unattended
•Never touch the drones motors during or after as they can get hot
•Never touch the blades when they are in rotating
•If the drone becomes damaged, stop using it immediately
•Do not dispose of any parts of the drone or controller in the normal
rubbish, all parts should be taken to your local recycling centre
•The battery in the drone should never be exposed to any form of high
temperature or disposed of in a fire
Safety Guidelines
Check before Use
•This product is not a toy, but it is a high precision drone that integrates
various electronic stability and control mechanisms.
Please be sure to setup this drone carefully and correctly to ensure safe,
accident-free operation.
•Please be sure that the batteries of the drone and transmitter are clean,
undamaged and have enough power.
•Please be sure that all the propellers are undamaged and are installed in
the right orientation.
•Please do a thorough check of the product before each use.

4
Check for firmness of the parts, any signs of cracks and wear of the
propeller, battery power and effectiveness of the product until the issue
has been taken care for.
Safe flight Environment
•Make sure the surrounding area is free of all people, pets or other
obstacles before you start to fly your drone
•Your drone is designed for indoor or outdoor use. However, it is not
recommended to fly the drone inside if there is limited space, or outside
if there is any wind.
•Keep a safe playing distance between you and the drone at all times.
Use of Battery
•Please ensure batteries are fitted in the correct orientation as shown in
the instruction manual.
•Avoid short circuits by fiting the batteries incorrectly, and do not crush or
squeeze the batteries as this could carry the risk of an explosion.
•Do not mix new and old batteries as this can lead to a poor performance
of the product.
•Dispose used batteries carefully.
•Please keep dead batteries away from heat and fire.
Fly in Open Areas
Maintain Line
of Sight
Fly Below 164
feet (50 m)

5
•If the device is not going to be used for an extended period of time,
remove batteries to prevent potential damage from battery leakage.
•It is recommended to only use the USB charging cable that comes with
the drone to charge the battery.
•Don't connect the battery directly to wall outlets or car cigarette-lighter
sockets.
•Don't attempt to disassemble or modify the battery in anyway.
•Don't use the battery if it gives of an odor, generates heat, becomes
discolored or deformed, or appears abnormal in any way.If the battery is
in use or being charged, remove it from the device or charger
immediately and discontinue use.
Controller functions
headlesss button
throttle left stick
LED
one key stop
one key start
power switch
trim
right stick
trim
3 Pcs of AAA“ batteries
(not included)
speed select button

6
•Always use alkaline batteries
•Never mix old and new batteries
1. Unscrew the battery cover and insert 3xAAA batteries (not included),
making sure you insert them following the correct polarity as shown
2. Re-attach the battery
Drone’s details
It is crucial that all the propellers are installed in the correct position
(Pay attention to the letter A or B printed underneath each propeller.)
The battery is built into the drone and cannot be replaced
Propeller A
(Clockwise)
Propeller B
(CounterClockwise)
Propeller A
(Clockwise)
Propeller B
(CounterClockwise)
HEAD
LED

7
Charging the drone battery
1. Insert the charging wire into the battery socke
2. Connect the USB charger (square socket) to acomputer, the USB indicator
will glow red
3. The red light will go off when the drone is fully charged
Pairing your drone to the controller
Power Bank
USB Adapter
(5 V/0.5-
2.0A)
Computer USB Port
WARNING
Do not leave the battery unattended while charging &
only use the supplied battery or plug charger.
TAIL

8
1. Turn on the drone. The LED on the drone will start to flash.
Place the drone down on a flat surface
2. Turn on your controller. Your controller will beep once & LED light will
flash
3. Push left throttle up once & controller will beep once
4. Pull left throttle down once & controller will beep once
Pairing is completed once the drone lights & controller lights stop flashing
Flying your drone
power switch
Take Off/ Landing
Method 2
Landing Method 1
Take Off Method 1

9
Taking Off/ landing:
Taking Off
Method 1:
Press the one key start button, the propellers will rotate without taking off.
Push up the throttle left stick to take off.
Method 2:
Push the throttle left stick up until the propellers rotate without taking off
and then push up the throttle left stick again to take off.
Landing
Method 1:
Press the one key stop button, the drone will land by itself
Method 2:
Push the throttle left stick down until the drone lands
Altitude & rotate:
Ascend
Descend
Use “throttle left stick“
to control the altitude
& rotation during flight.

10
Forward / backward / left / right:
Trimming
If the drone sways in an unprompted direction, use the trim buttons to
correct the flight:
1- Forward trim
2- Backward trim
3- Left trim
4- Right trim
Features
1. Speed modes:
Select between 3 speed modes:
40% speed (controller makes 1 beep);
60% speed (controller makes 2 beeps);
100% speed (controller makes 3 beeps)
Use “throttle right stick”
to control forward,
backward, left & right
movement during
flight.
Right
Left
Forward
Backward


