Wyrestorm Synergy SYN-TOUCH10 User manual

SYN-TOUCH10
User Manual
v1.0
SYN-TOUCH10

2
Table of Contents
Introduction ...................................................................................................3
Features .................................................................................................3
Package Contents ..................................................................................3
Specifications..........................................................................................3
Panel Description ...................................................................................4
Configurating of the Device...........................................................................5
Before Using TOUCH10-A00 .................................................................5
Creating a Configuration File..................................................................6
Exporting the Configuration File ...........................................................10

3
Introduction
This touchpad is ideal for single-room applications, providing control
of the devices in meeting rooms through loaded configuration file.
Features
•Uses imported configuration file to quickly perform control on
devices.
Package Contents
•1 x Touchpad
•1 x DC 12V Power Adapter (with US, UK, EU & AU Pins)
•1 x Wall Mounting Kit
•1 x Desktop Stand
Specifications
Technical
Input/Output Port
1 x DC 12V, 1 x SD Card Slot, 1 x RJ45, 1 x USB
2.0, 1 x Serial, 1 x Micro USB OTG, 1 x 3.5mm
Audio Jack Output
Screen Size
10.1”
Panel Type
IPS
Resolution
Up to 1280 x 800
Interactive Touch
10 Points Capacitive Touch
Brightness
250 cd/m2
Viewing Angle
85°
Operating System
Android
Supported
Controllable Devices
APO-200-UC, APO-210-UC, APO-VX20,
SW-510, SW-515, SW-540-TX-W, SW-740-TX,
Other third-party devices
General
Power Supply
DC 12V 1.5A
Dimensions
274mm x 190 mm x 29.8mm/10.79” x 7.48” x 1.17”

4
General
(W x H x D)
(desktop stand not included)
Net Weight
0.72kgs/1.59lbs (desktop stand not included)
Panel Description
ID
Name
Description
1
Screen
10.1” LED multi-touch screen.
2 LED LED color is configurable
. Available color options:
red/blue/green/yellow/purple/white/cyan.
3 Power Hold and press this button for at least 2s to power on the
device.
4
SD Card
Insert a SD card for loading existed configuration file.
5 Audio Out 3.5mm audio jack output. Connect to an audio receiver
such as a headphone.
6 USB 2.0
Connect to a USB flash drive for loading existed
configuration file.
7
Serial Port
Connect to RS232 device for serial communication.
8
RJ 45
Connect to Ethernet.
9 DC Connect to the power adapter provided for DC 12V power
input.

5
Configurating of the Device
This touchpad is an easy-to-use tool to control AV system in meeting
rooms. After quick loading of inserted configuration file, users can
access the controlled devices with ease.
Before Using TOUCH10-A00
Before using TOUCH10-A00, you need to create a new configuration
file for the controllable device on your PC.
1. Download Synergy Touch App to your PC. Ensure your PC are
in the same network segment as the conferencing system.
2. Install and launch Synergy Touch App on your PC. The following
welcome screen pops up.
UI Elements
Description
Click to create a new configuration project.
Click to load an existing configuration file locally.
Click to export the configuration project locally.
Toggle between Edit view and Preview view.
Click to manage the device that is being controlled in the
current configuration project.

6
UI Elements
Description
Click to add a layout or a button for the current configuration
project.
Advanced settings for the current configuration project, such
as changing the background image, logo, transparency or
theme color, or changing the network for touchpad.
Displays the software version.
Click this button to walk you through a series of steps for
creating a configuration project.
Creating a Configuration File
To create a new configuration file, perform the following:
1. Start creating a new configuration.
Click create button to create a new configuration project,
and select the type of device you want to control.
Note: If the target device is one of Wyrestorm products, please
select WyreStorm Template, which can be downloaded from
Wyrestorm official website; if you want to customize functions for
other devices, select Third Party Device.
For instructional purpose, the example uses the Third Party
Device here.
In the following window, complete the form information,
especially the required fields marked with red asterisks, and click

7
Create, an empty configuration project is created successfully.
>>
2. Create layout for the device.
Click button to create and select a new layout, then fill in the
basic information of the layout.
>>
3. Add a new button for the layout.
a) Now the layout just created appears in the layout list, click
e.g. Video Settings
e.g. Video

8
any placeholder frame in the workspace to add new button.
b) In the dialog box that pops up, select the type of button you
desire from the four following options.
This example uses Set Only button here.
4. Edit button information.
Fill in each form item according to actual functional requirements
and specifications, and then click Save button to create a button.
For more information about features or rules of the button, click
the button in the upper right corner.
When you move the
mouse over the tab,
you will see these two
icons, which you can
click to edit or delete
the layout.

9
>>
Now the button has been added successfully in the workspace
as following.
5. Click to switch to Preview mode. The displayed screen is
what it will actually look like on the touchpad. In preview mode,
you can click on each button directly to verify the actual function
of them.

10
Exporting the Configuration File
After you have completed the edit of the configuration project, export
it to a file, and copy the file to the root directory of your SD card or
USB flash drive into the touchpad and re-launch Synergy Touch. Now
you can easily operate and control the target devices on touchpad.