X-Vision XP101VD User manual

XP101VD User’s Manual
V1.1.0

i
Table of Contents
1OVERVIEW ..............................................................................................1
1.1 General Introduction................................................................................................................1
1.2 Specification.............................................................................................................................1
1.3 Feature......................................................................................................................................2
2FRONT PANEL/REAL PANEL/INSTALLATION .......................................5
2.1 Check Unpacked NVS............................................................................................................5
2.2 Front panel ...............................................................................................................................5
2.3 Rear Panel................................................................................................................................6
2.3.1 NVS0404DH ........................................................................................................................6
2.3.2 NVS0104DH ........................................................................................................................7
2.4 Connection ...............................................................................................................................7
2.4.1 General Connection ...........................................................................................................7
2.4.2 Audio/Video Connection ....................................................................................................8
2.4.3 Audio Talk Input Connection.............................................................................................8
2.4.4 Video Output Device and Connection .............................................................................8
2.4.5 Audio Output........................................................................................................................8
3OPERATION...........................................................................................10
3.1 Boot Up and Shut Down.......................................................................................................10
3.2 Login........................................................................................................................................10
3.2.1 Preparation ........................................................................................................................10

ii
3.2.2 Login ...................................................................................................................................10
3.3 Main Window..........................................................................................................................12
3.3.1 Decode Channel Information ..........................................................................................14
3.3.2 Decode Channel Setup....................................................................................................14
3.3.3 Add /Remove Front-end Device .....................................................................................15
3.3.4 File Playback and Time Playback ..................................................................................15
3.4 Decoder Configuration..........................................................................................................17
3.4.1 Tour Config .....................................................................................................................17
3.4.2 Decode Output ..................................................................................................................18
3.4.3 Video Output......................................................................................................................19
3.4.4 TV Adjust............................................................................................................................20
3.4.5 Here you can adjust the TV display margin..................................................................20
3.4.6 Decode Tour......................................................................................................................20
3.4.6 Decode strategy ...........................................................................................................21
3.5 Configuration..........................................................................................................................22
3.5.1 System Information...........................................................................................................22
3.5.2 System Configuration.......................................................................................................23
3.5.3 Advanced ...........................................................................................................................30
3.5.4 Additional Function ...........................................................................................................31
3.6 Alarm .......................................................................................................................................32
3.7 About .......................................................................................................................................33
3.8 Log out ....................................................................................................................................33
4ALARM INPUT AND OUTPUT ...............................................................34
4.1 Alarm Input Port.....................................................................................................................34
4.2 Alarm Output Port..................................................................................................................35
4.3 Alarm Output Relay Specification .......................................................................................36

iii
4.3.1 Contact parameters..........................................................................................................36
5. NETWORK KEYBOARD CONTROL DECODE EXPLANATION...............37
5.1 Connection .....................................................................................................................................37
5.1.1 Keyboard setup after serial ports connected ....................................................................37
5.1.2 Keyboard setup after network connected..........................................................................37
5.2 Login method .................................................................................................................................38
5.3 Picture switch.................................................................................................................................38
APPENDIX TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ...........39

iv
Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for the operation of your system.
Here you can find information about this series NVS’s features and functions.
Before installation and operation please read the following safeguards and warnings
carefully!

v
Important Safeguard and Warning
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modifications or attempted
repair.
2．Installation
Do not apply power to the device before completing installation.
Do not put object on the NVS.
3．Environment
This series NVS should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please guarantee sound ventilation and keep device clean.
4. About Accessories
Be sure to use all the accessories recommended by manufacturer.
Contact your local retailer ASAP if something is damaged in the accessory package.
This user’s manual applies to the XP101VD audio and video decode device
(version 1.x.0) only.

1
1 Overview
1.1 General Introduction
XP101VD series product is a network audio & video decode device designed and
developed for the video network monitor system. It has elegant shape and strong data
process capability. It has stable and sound network function and supports all popular
encode modes. This series product has sound expansibility and it is easy to maintain and
connect.
The output video support single-split and four/nine/sixteen-window split. I t is easy to install in
whole video monitor system and is easy to realize centre control and management. At the
same time, it greatly reduces the system general cost.
This series product adopts embedded OS to guarantee the safety, stability, reliability of
the device and network monitor system and also guarantee the high performance of the
device and the system.
1.2 Specification
Device Model XP101VD
Main Processor High performance industry embedded micro processor
OS Embedded LINUX
Input Device Front panel button and keyboard
System
Parameter
Shortcut Menu N/A
Video Standard MPEG4/H.264
Audio Standard PCM/G711
Decode
Display
Resolution
QCIF/CIF/2CIF/ HD1/D1/720P/1080P
Video Frame
Rate PAL:1～25f/s；NTSC:1～30f/s
Bit stream Type Composite stream/Video stream
Video Output
Channel 4 channels
Video Output
Port VGA/HDMI/BNC
Hardware
Port
Specification
Audio Output
Channel 4 channels

2
Audio Output
Port HDMI/BNC（Level: 200-3000 mV. Resistance: 5Ω）
Communication
Port
One RJ45 10M/ 100M/1000M self-adaptive Ethernet port
One RS232 port
2 duplex RS485
Audio Talk
Channel 1 channel
Audio Talk Port BNC(Level: 2Vrms. Output resistance : 10k ohms)
Alarm input 16 channel
Alarm Output 8-ch relay output (30VDC 1A.125VAC 0/5A activation output)
Power DC12V, 5.0A
Power
Consumption ≤40W
Working
Temperature 0℃－＋55℃
Working
Humidity 10%－90% 86kpa－106kpa
Dimension
（mm）440×300×42.1 mm
Working
Environment
and Other
Physical
Specification Weight 3.00—3.50KG
1.3 Feature
Property Setup
Network parameter setup such as IP, getaway, subnet mask.
Support remote control.
NTP Synchronize system time via NTP service.
DHCP Automatically get network parameter such as IP parameter.
Auto get
After you configured the front-end encode device information,
decoder can automatically connect to the encode device and then
begin work independently and reliably,
Network Passive receive
In transmit mode, decoder can get the random data bit stream from
the network server to realize decoding output.
Window Split
XP101VD:
The first TV supports 1/4/9/16 window split; the second/third/fourth
TV supports 1/4/ window split
NVS0104DH supports 1/4/9/16 window split
Output
Tour
XP101VD has four out put interface sets
NVS0104DH has one output interface set.
( VGA，HDMI，TV are contained in each set)
Both two products can realize real-time surveillance via monitor

3
and support any tour output of 1/4/9 window split or sequence
combination, in addition, both products support decode tour
External Alarm
Multiple-channel relay alarm output to activate the peripheral alarm
device (such as on-site light control), manual control and activation
video output.
Decoder Alarm Prompt current decode status in time.
Alarm
Precaution
Measure
Alarm input port and alarm output port both have protection
electricity to guarantee main device safety.
Common COM Device debug console.
Network
Keyboard The key board can control the device via network port.
Control
Keyboard The key board can control the device via RS232 port.
COM
Transparent
COM Transparent COM function/
Decode
Capability XP101VD max. supports 28 D1 decode output(2M
code-stream), there are 14 720P decode output (4M, the main cor
e
for 8 channels, the minor cores for 2 channels each) and 7 1080
P
decode output (8M, the main core for 4 channels, the minor cores
for 1 channel each)
Auto check current decode loading and prompt user decode
abnormal event.
Real-time
stream decode Get the local real-time bit stream of the encoder and then output.
Previous
stream decode
Get the local previous bit stream of the encoder and then output.
Decode
Message
feedback All application ends can accurately get current decoding status.
Account
Management
Add, modify, and delete user or user group.
Modify user password.
Right
Management Set different rights for different users.
User
Management
Security
Management
Password protection.
Three times login failure may result in account lock.
Version
Information
Display device important hardware port information, software
version information and etc.
Log Search Record device important log. Support search by type.
Others
Time
Synchronization Set system time manually or synchronization PC time.

4
Language
Option English
DST Set proper DST time according to different regions’ setup.
Auto
maintenance Auto maintain device regularly.
DNS Domain service
Upgrade Support various upgrade types such as U disk, network, and TFTP.
Intelligent
Operation Support copy function for the same setup.
Development
Provide decode device SDK.
Provide demonstration software and development introduction.

5
2 Front Panel/Real Panel/Installation
Note: All the installation and operations here should conform to your local electric
safety rules.
2.1 Check Unpacked NVS
When you received the NVS from the shipping agency, please check whether there is any
visible damage. The protective materials used for the package of the NVS can protect
most accidental clashes during transportation. Then you can open the box to check the
accessories.
Please check the items in accordance with the list on the warranty card.
Finally you can remove the protective film of the NVS.
The label at the bottom of the box is very important. Usually we need you to represent the
serial number when we provide the service after sales.
2.2 Front panel
This series product has two front panels.
One front panel is shown as in Figure 2-1.
Figure 2-1
Please refer to the following sheet for detailed information.
Name Icon Function Name Icon Function
Power
button
Press it for three
seconds to boot up
or shut down the
device.
USB port Connect to external USB
device.
Power
indication
light
The indication light
becomes on when
system boots up.
Alarm
indication
light
N/A
Network
indication
light
The indication light
becomes on when
abnormal network
event occurs
(offline, IP conflict
and etc.)
HDD
indication
light
N/A
TV
indication
light
When device is in TV working mode,
For XP101VD, all the indication lights are effective
The other front panel is shown as in Figure 2-2.

6
Figure 2-2
Please refer to the following sheet for detailed information.
Name Icon Function Name Icon Function
Power
button
Press it for three
seconds to boot up
or shut down the
device.
USB port Connect to external USB
device.
Power
indication
light
The indication light
becomes on when
system boots up.
Alarm
indication
light
N/A
Network
indication
light
The indication light
becomes on when
abnormal network
event occurs
(offline, IP conflict
and etc.)
HDD
indication
light
N/A
IR receiver N/A
TV
indication
light
When device is in TV working mode.
For XP101VD, only the channel 1 to channel 4 indication lights are
effective
The rest channels 5 to channel 16 indication lights are null right now.
2.3 Rear Panel
2.3.1 XP101VD
The rear panel is shown as in Figure 2-3.
Figure 2-3

7
SN Port Name SN Port Name SN Port Name
1 Ground screw hole 2 Audio output
port(BNC)
3 Video output port (BNC)
4 Audio talk output
port 5 Audio talk input port
6 VGA port
7 HDMI port 8 RS232 port 11 Power plug port
9 Network interface(10M/100M/1000Mself-adaptive
Ethernet port)
12 Power switch
10 Relay input, relay output, duplex RS485 port
2.4 Connection
2.4.1 General Connection
Please refer to the following figure for connection information. See Figure 2-5.

8
Figure 2-5
2.4.2 Audio/Video Connection
All audio and video data are encoding from the front-end device and then input to the
network via RJ45 port.
2.4.3 Audio Talk Input Connection
It adopts BNC port.
2.4.4 Video Output Device and Connection
XP101VD adopts four output sets. VG A, HDMI and BNC a set; BNC(1.0VP-P，75Ω).
Here we recommend the industry monitor to be the output device of the decoder. It has
the following advantages:
The industry monitor is suitable for long time surveillance. The pc monitor cannot run
for such a long time. It is easy to be aging, damage or burn down.
Industry monitor has stronger vivid and colorful video.
Industry monitor can be used in many complicated environments and has strong
anti-interference capability. It is more stable.
Please note, using TV as video output device is not a reliable substitution method. You
need to reduce the working hours and control the interference from power supply and
other devices. The risk of short circuit problem resulting from low quality TV may cause
damage to other devices.
2.4.5 Audio Output
The audio output parameter of NVS is 200mv 1KΩ(BNC), it can connect directly to low
impedance earphone, active sound box or amplifier-drive audio output device.
If the sound box and the pick-up cannot be separated spatially, it is easy to arouse
squeaking. In this case you can adopt the following measures:

9
zUse pick-up with better directing property.
zReduce the volume of the sound box until there is no squeaking.
zUsing more sound-absorbing materials in decoration to reduce voice echo and
improve acoustics environment.
zAdjust the layout to reduce risk of the squeaking.

10
3Operation
3.1 Boot Up and Shut Down
Boot up
Connect the NVS to the power and then press the power button in the front panel. You
can see the power indication light becomes on and NVS boots up.
The system is in multiple-window display mode by default.
Shut down
You can press power button in the front panel for three seconds to shut down the device.
System Restore after Power Failure
When decoder is working, if the power failure occurs, the system can automatically
connect to the front-end device and restore previous working status once the power
connection becomes normal.
3.2 Login
3.2.1 Preparation
Before log in, please make sure:
zNVS connection is OK.
zYou have set PC IP address, NVS IP address, subnet mask and gateway. (Please
set the IP address of the same section for the PC and NVS. Please input
corresponding gateway and subnet mask if there are routers.) When NVS booted
up normally, please input account name admin and password admin via the PC
COM port., then input net –a and then input IP, NETMASK, GATEWAY. The
command mode is: net -a [IP] [NETMASDK] [GATEWAY].
For example:
Username: admin
Password: admin
DeBug>net -a 192.168.XXX.XXX 255.255.XXX.XXX 192.168.XXX.XXX
zUse order ping ***.***.***.***(NVS IP address) to check connection is OK or not.
Usually the return TTL value should be less than 255.
zOpen IE and then input the address in the column.
zWEB control can be downloaded and installed automatically. System can download
the latest Web control and remove the old one.
zYou can run uninstall web.bat to remove the control
zSystem is compatible with web control of WINVISTA. But you need to disable account
control item and then reboot the PC.
3.2.2 Login
Open the IE and then input the NVS IP address in the address column.

11
For example, if your NVS IP address is 192.168.1.100, then please input http://
192.168.1.100 in IE address column. See Figure 3-1.
Figure 3-1
System pops up warning information to ask you whether install webrec.cab control or not.
Please click yes button.
If you can’t download the ActiveX file, please modify your settings as follows. See Figure
3-2.
Figure 3-2
Input IP address
here.

12
After installation, the interface is shown as below. See Figure 3-3.
Figure 3-3
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
3.3 Main Window
After login successfully, the interface will be shown as Figure 3-4.
(The snapshot below is the interface of XP101VD.
There are eight sections:
Section 1: Decode channel
There are 28 decode channels in XP101VD. There are four TVs corresponding to
four output sets. Click four icons on the upper left to choose. There are 16 channels in
the first TV, please see Figure3-4. There are four channels in the second/third/fourth
TV respectively, please see Figure3-5.
TV 1: Decode channel 1 to decode channel 16.
TV2: Decode channel 17 to decode channel 20.
TV3: Decode channel 21 to decode channel 24.
TV4: Decode channel 25 to decode channel 28.
Section 2: Close full-screen monitor
Only close the monitor of the channels of the chosen TV.
Section 3 Channel mapping
For the channel that currently choosing TV only
Section 4 Window split

13
There are four display modes, namely, single-split, 1/4/9/16 window split. Take the
first TV for an example: there are 16 options for single-split: channel 1, Channel
2……channels 16; 4 options for four-window split: 1-4ch, 5-8 ch, 9-12 ch, 13-16 ch; 2
options for nine-window split: 1-9ch, 8-16ch; one option for 16-window split:
1-16channel.
Section 5: System menu. Please read the user's manual for further reference.
Section6: Here you can view device channel information. You can add/delete
decoder front-end device and realize file playback and time playback function. There
are two shortcut options: mapping channel and close full-screen monitor.
Section7: Bidirectional talk. Please select the corresponding audio talk mode from
the drop down list and then enable this function. Click reboot button you can reboot
current device.
Section8: There are three buttons: Play/pause/stop.
Figure 3-4
6
7
8
5
1
24
3

14
Figure 3-5
3.3.1 Decode Channel Information
Single click and choose any decode channel to connect real-time decode output.
Please see figure 3-6 :
1. Front-end device IP address.
2. Front-end real-time monitor channel.
3. The real-monitor channel connection status between the decoder and the front-end.
4. It is a button to control the connection between the decoder and the front-end.
Figure 3-6
3.3.2 Decode Channel Setup
1
2 3
4