X-Vision XC960S30 User manual

Professional HD 960H
30x Zoom Speed Dome
User Manual
Version 1
Thank you for purchasing the XC960S30 camera from Xvision.
Please ensure that you read and understand this User Guide before operating the camera.
Please store this User Guide in an easily accessible location.
HD 960H

XC960S30
2
www.xvision.com
Contents
1. Product Overview .................................................................................. 4
1.1 Features ........................................................................................ 4
1.2 Package Contents........................................................................... 4
2. Installaon ............................................................................................ 5
2.1 Connceons .................................................................................. 6
3. Hardware Installaon ............................................................................ 7
4. Operaon Instrucons ........................................................................... 8
4.1 Preset Funcons ............................................................................ 8
4.2 Keyboard Operaon ...................................................................... 10
4.2.1 Preset Locaon Scan ...................................................... 10
4.2.2 Area Scanning ................................................................. 10
4.2.3 Start Area Scanning ........................................................ 11
4.2.4 Paern Scanning ............................................................. 11
5. Menu Seng ......................................................................................... 12
5.1 System Informaon ....................................................................... 12
5.2 Camera Seng 1 ........................................................................... 13
5.3 Camera Seng 2 ........................................................................... 13
5.4 Auxiliary Seng ............................................................................. 14
5.5 Scanning Set .................................................................................. 14
5.6 Title Set ......................................................................................... 15
5.7 Alarm Linkage ................................................................................ 16
5.8 Language Seng ........................................................................... 16
5.9 Default Seng ............................................................................... 16
6. Specicaon .......................................................................................... 17

XC960S30
3
www.xvision.com
Safety Precauons
1. Do not install the equipment in an environment with too much moisture, dust or smoke dust as this
may result in re or electric shock.
2. In the unlikely event that the equipment should malfuncon and emit an abnormal smell or smoke,
please immediately stop it, shut o the power and contact your supplier.
3. Please do not place this equipment near a heat source to avoid risk of re.
4. Please do not store, install and use this product in danger areas with inammable or explosive
substances.
5. Please make sure the power is turned o when installing the product.
6. Please ensure that you install the camera in an area with good venlaon.
7. When installing the camera, please make sure that it does not face any objects giving out strong lights
as this will damage the CCD of the camera.
8. Please do not use the camera in an environment where temperatures exceed either -20°C to +55°C.

XC960S30
4
www.xvision.com
1. Product Overview
1. Product Overview
Thank you for purchasing the HD 960H XC960S30 from Xvision. Please read through this manual
carefully and make sure you understand before operang the camera.
1.1 Features
• Sony 960H CCD Sensor
• Xvision X2K DSP
• High Speed (Up to 360°) and reliable panning and lng
• Auto Iris Auto Focus 30x Zoom Lens
• Viewing Angle between (1 - 60°)
• Maximum 256 Presets
• 50m Number Plate Recognion
• Designed for Wall or Ceiling Mount
• Weatherproof - IP66 Rated
1.2 Package Contents
The packaged box for the XC960S30 comes with the following items:
XC960S30
Camera
Bracket
Installaon Pack
Including: Screws to
aach camera to
bracket and green
RS485 terminal block
Power Supply
User Manual
Oponal Accessories
Corner Mount
Pole Mount
Ceiling Bracket
Alarm Box
Mini Speed
Dome
Keyboard
& Joysck

XC960S30
5
www.xvision.com
1. Product Overview
2. Installaon
The XC960S30 camera can be wall mounted, please follow the steps below for installaon.
1. Using the bracket as a stencil, mark out the drill
holes needed in the wall.
2. If feeding wires through the wall, you will need
to drill a hole through the wall for the wires to
go. However, if placing through the bracket, you
can just feed through the side or boom (shown
below).
3. Drill the holes in the wall where you have made
the marks and insert the wall plugs if required.
5. Then, re-aach the main camera bracket to the
base. To do this, use a cross head screw driver and
turn the screws clockwise.
4. Now, thread the cable from the main camera
back through the bracket.
6. Lastly, screw the bracket into the wall.

XC960S30
6
www.xvision.com
2.1. Connecons
BNC Socket for Video
DC Socket for Power
RS485 Terminal for Speed
Dome Control

XC960S30
7
www.xvision.com
1. Product Overview
3. Hardware Installaton
3.1 Address Seng
The address of the camera can be set in 2 ways:
1. Address Dial Switch: To do this, adjust the dial switch on the camera to the desired address.
2. So Address: To set by so address, you will need to go to the OSD Menu. For more informaon, please
go to secon 5.6 on page 14.
Please see the table below to see how to set the address on the camera.

XC960S30
8
www.xvision.com
1. Product Overview
4. Operaon Instrucon
4.1 Preset Funcons
Please Note: Not all funcons are supported (we recommend using our XSDA-2 for alarm in and out
funcons).
Preset Locaon Funcon
95+CALL Entering the main menu
XXX+PRESET Saving a preset point
XXX+CALL Calling a preset point
40+CALL Operang the rst group of preset locaon scanning
41+CALL Operang the second group or preset locaon scanning
42+CALL Operang the third group or preset locaon scanning
43+CALL Operang the fourth group or preset locaon scanning
44+CALL Set the le boundary of area scanning 1
45+CALL Set the right boundary of area scanning 1
46+CALL Set the le boundary of area scanning 2
47+CALL Set the right boundary of area scanning 2
48+CALL Set the le boundary of area scanning 3
49+CALL Set the right boundary of area scanning 3
50+CALL Set the le boundary of area scanning 4
51+CALL Set the right boundary of area scanning 4
52+CALL Operang area scanning 1
53+CALL Operang area scanning 2
54+CALL Operang area scanning 3
55+CALL Operang area scanning 4
56+CALL Start the seng of paern scan
57+CALL Save the seng of the rst group of paern scan
58+CALL Save the seng of the second group of paern scan
59+CALL Save the seng of the third group of paern scan
60+CALL Save the seng of the fourth group of paern scan
61+CALL Operang the rst group of paern 1

XC960S30
9
www.xvision.com
62+CALL Operang the second group of paern 2
63+CALL Operang the third group of paern 3
64+CALL Operang the fourth group of paern 4
65+CALL Starng 360° connuous rotaon
67+CALL Arm Alarm output 1
68+CALL Arm Alarm output 2
69+CALL Disarm Alarm output 1
70+CALL Disarm Alarm output 2
71+CALL Start alarm output 1
72+CALL Stop alarm output 2
75+CALL Start the display status column
76+CALL Close the display status column
77+CALL Start vercal ip
78+CALL Close vercal ip
79+CALL Start guard funcon
80+CALL Close guard funcon
81+CALL Start privacy shelter grid
82+CALL Close privacy shelter grid
83+CALL Turn on backlight compensaon funcon
84+CALL Turn o backlight compensaon funcon
85+CALL Turn on image freezing funcon
86+CALL Turn o image freezing funcon
87+CALL Start image mirror funcon
88+CALL Stop image mirror funcon
89+CALL Automac colour-to-black funcon
90+CALL Turn on automac colour-to-black funcon
91+CALL Turn o automac colour-to-black funcon
92+CALL Close the wide dynamic range funcon
93+CALL Automac wide dynamic range funcon
94+CALL Manual wide dynamic range funcon

XC960S30
10
www.xvision.com
97+CALL Begin image rollover funcon
98+CALL Stop image rollover funcon
101+CALL Defaulted seng
102+CALL Switch manual operaon speed (Fast/Medium/Slow)
103+CALL Switch linear scanning speed (Fast/Medium/Slow)
107+CALL, 108+CALL Calling 107 followed by 108 will restard the dome
109+CALL Start communicaon for fault indicaon
110+CALL Close communicaon for fault indicaon
4.2 Keyboard Operaon
4.2.1 Preset Locaon Scan
There are a total of 4 preset rounes and 32 preset locaons can be set. To set the preset locaon;
1. Execute the command of seng a preset locaon.
2. Call the desired set opon to the preset locaon.
3. Then, wait for the length of me you wish that preset point to stay in that posion.
4. Call the next roune you want to set a preset locaon to.
5. Execute the command of seng a preset locaon and save the set.
4.2.2 Area Scanning
There are 2 ways of seng the area scanning.
1. Using special preset locaon order
Set the le boundary of region 1 by pressing the ‘44+CALL’ preset.
Set the right boundary of region 1 by pressing the ‘45+CALL’ preset.

XC960S30
11
www.xvision.com
2. Using the keyboard for seng
Set the le boundary of region 1 by moving the joysck to the le unl you have reached the ideal posion.
To conrm the posion, press the ‘OPEN’ key.
Set the right boundary of region 1 by moving the joysck to the right unl you have reached the ideal
posion. To conrm the posion, press the ‘OPEN’ key.
4.2.3 Start Area Scanning
To being the area scanning funcon, call the preset locaon 52-55 which will operate the scanning path 1-4
respecvely.
The dome will then rotate from le to right at the speed you have set.
4.2.4 Paern Scanning
To set the paern scanning funcon, follow the steps below;
1. Call the preset locaon 56 to open the seng.
2. To set your paern you can use the ‘up’, ‘down’, ‘le’, ‘right’, ‘wide’, ‘tele’, ‘near’, ‘far’, ‘close’ and ‘open’
buons. These will set the dome to go up, down, zoom etc in the paern.
3. To save the paern, call the preset locaon 57. This can be done up to 4 paerns by calling presets
57-60.
4. To operate the paern scan, call the preset locaon 61-64, which will operate 1-4 respecvely.

XC960S30
12
www.xvision.com
1. Product Overview
5. Menu Seng
To access the camera menu, when the camera is on, use the command ‘CALL 95 preset locaon’. When the
menu has appeared, you will be presented with the following opons:
• System Informaon
• Camera Sengs
• Aux Sengs
• Scan Sengs
• Title Sengs
• Alarm Sengs - Not supported (we recommend usgin our XSDA-2 for alarm in and out funcons)
• Language Sengs
• Default Set
Aer the main menu has appeared, you can use the ‘up’/’down’ buons on the speed dome controller or
the ‘up’/‘down’ key on the DVR to navigate on the menu.
5.1 System Informaon Opon: Ver / ADDR / BPS / PROT
This opon allows you to view the system informaon from version number, speed dome address,
baudrate and protocol.
Version No.: Version number of the camera
Address: Set the dome address using the dial switch
Baudrate: Speed dome automacally sets the baudrate
Protocol: Speed dome automacally sets the protocol
Exit: Save / End and return to the previous menu.
VER: V1.02S
ADDR: 000
BPS: AUTO
PROT: AUTO
EXIT

XC960S30
13
www.xvision.com
5.2 Camera Seng 1 Opon: ZM SPEED / WB / EXPOSURE / B LIGHT / FREEZE
The camera seng opon allows you to adjust; zoom speed, white balance, exposure, backlight
compensaon or turn on the image freezing funcon.
Zoom Speed: Set the speed to fast, medium or slow
White Balance: Set the white balance funcon to automac
indoor, outdoor or manual
White Balance R Gain: If white balance is set to manual, adjust
the Red Gain from 0-255.
White Balance B Gain: If white balance is set to manual, adjust
the Blue Gain from 0-255.
Exposure: Adjust the lens exposure on the camera (0-14), with
14 being highest exposure.
Backlight Compensaon: Turn the funcon on or o
Image Freezing: Turn the funcon on or o
Next: Go to the next camera seng submenu.
Exit: End and return to the previous menu.
Save: Save the sengs and exit the submenu
CAM TYPE: XF-S
ZM SPEED: FAST
WB MODE: AUTO
WB RGAIN: 000
WB BGAIN: 000
EXPOSURE: 07
B LIGHT: OFF
FREEZE: OFF
NEXT
EXIT
SAVE
5.3 Camera Seng 2
The camera seng opon allows you to adjust; wide dynamic mode, wide dynamic level, mirror image
funcon, day & night seng, image eect, image ip, OSD display and minimum focus.
Wide Dynamic Mode: Set to automac, manual or o
Wide Dynamic Level: Set the WDR level (0-128).
Image Mirror: Turn the mirror funcon on or o.
Day & Night Seng: Turn the day night seng to on, o or
automac
Image Eect: Turn the image eect to inverse colour,
black & white or o.
Image Flip: Turn the funcon on or o
OSD Display: Turn the funcon on or o
WDR MODE: OFF
WDR LEV: 080
MIRROR: OFF
DAY NIGHT: AUTO
EFFECT: OFF
IMG FLIP: 0FF
OSD DISP: OFF
MIN FCS: 100CM
NEXT
EXIT
SAVE

XC960S30
14
www.xvision.com
5.4 Auxiliary Seng Opon: AUTO SPEED / MAN SPEED / AUTO FLIP / START BAR
ZOOM REV / SOFT ADD / SOFT ID / FREE TIME / FREE ACT / POWER
The auxiliary seng allows you to adjust the speed of the pan, lt & zoom on the camera, auto ip
funcon, so address switch, so ID and the free me.
Auto Speed: Set the automac speed of the pan, lt and zoom
to fast, medium and slow.
Manual Speed: Set the manual speed of the pan, lt and zoom
to fast, medium and slow.
Auto Flip: Turn the auto image ip funcon on or o.
Start Bar: Turn the start bar funcon on or o.
Zoom Rev: Turn the zoom reverse funcon on or o.
So Address Switch: Turn the address switch on or o.
So ID: Set the so ID on the camera. (001-255)
Free Time: Set the me ....... (0-999)
Free Act: Set the me act ....... to none, preset scan, paern scan or preset ect.
Power Acon: Set the camera to perform an acon when it is powered. Set to none, perform preset scan,
paern scan or preset ect.
Exit: End and return to the previous menu.
Save: Save the sengs and exit the submenu
5.3 Camera Seng 2 CONTINUED
Minimum Focus: Adjust the minimum focus from 1cm, 10cm 30cm and 100cm.
Last Page: Go to the previouscamera seng submenu.
Exit: End and return to the previous menu.
Save: Save the sengs and exit the submenu
AUTO SPEED: MID
MANU SPEED: FAST
AUTO FLIP: ON
STAT BAR: OFF
ZOOM REV: OFF
SOFT ID SWITCH: OFF
SOFT ID: 001
FREE TIME: 015
FREE ACT: NONE
POWER ACT: NONE
EXIT
SAVE
5.5 Scanning Set Opon: SET AREA SCAN / RUN AREA SCAN / RUN PRESET SCAN
/ SET PATTERN SCAN / RUN PATTERN SCAN
The scanning set opon allows you to adjust and run the area, preset and paern scan opons.
Seng the area scanning: Set the area scanning (1-4)
Run the area scanning: Run the area scan (1-4)

XC960S30
15
www.xvision.com
5.5 Scanning Set CONTINUED...
Set the preset scan: Set the preset scanning areas.
Run the preset scan: Run the preset scan (1-4)
Set paern scan: Set the mode scanning (1-4)
Run paern scan: Run the mode scan (1-4)
Exit: End and return to the previous menu.
SET AREA SCAN: 1
RUN AREA SCAN: 1
ENTER PRESET SCAN SET
RUN PRESET SCAN: 1
SET PATTERN SCAN: 1
RUN PATTERN SCAN: 1
EXIT
PRESS OPEN TO SET OR RUN
SCAN NO.: 1
SEQ PRESET TIME
1 001 015
2 002 015
3 003 015
4 004 015
5 005 015
6 006 015
7 007 015
5.6 Title Set Opon: Area No. / Title X / Title Y / Title
This opon allows you to set the tle of the camera and posion the camera tle on screen.
Area No.: Set the area number (1-4)
X coordinates: X posion of the tle on the screen (0-29)
Y coordinates: Y posion of the tle on the screen (0-14)
Title: Set the camera tle. To do this, use the joysck on the
speed dome controller or arrow keys on your DVR to navigate.
To exit, either press the ‘up’ key or move the joysck up.
Mode: Input method mode, (Capitals, lower case leer,
charachers, symbols or numbers)
So Key: Use this to input characters.
Delete: Delete characters in the tle
Exit: End and return to the previous menu.
Save: Save the sengs and exit the submenu
AREA NO: 1
TITLE X: 00
TITLE Y: 00
TITLE: CAMERA 1
MODE: A, B......Z
DELETE
EXIT
SAVE

XC960S30
16
www.xvision.com
5.7 Alarm Linkage - Not supported (we recommend usgin our XSDA-2 for alarm in and out funcons)
Opon: Alarm Input / Input Type / Arming Time /
Preset Scan / Paern Scan / Zone Scan / Alarm Output
The alarm linkage opon allows you to set an adjust the alarms on the scannning modes.
Alarm Input: Set up to 2 alarm input numbers
Input Type: NO/NC
Arming Time: Set the arming me (Hours:Minutes)
Preset Scanning: Set alarm linkages on the preset locaon scans.
(0-4). To do this, select ‘1’ to set an alarm for preset scan 1.
For no alarm, select ‘0’.
Paern Scanning: Set alarm linkages on the paern locaon
scans (0-4). To do this, select ‘1’ to set an alarm for paern
scan 1. For no alarm, select ‘0’.
Zone Scanning: Set alarm linkages on the zone locaon scans
(0-4). To do this, select ‘1’ to set an alarm for zone scan 1. For no alarm, select ‘0’.
Alarm Output: Turn the alarm output on or o.
Exit: End and return to the previous menu.
Save: Save the sengs and exit the submenu
ALARM IN: 1
IN TYPE: NO
ARM STA: DISARMING
PRESET NO: 00
PST SCAN: 00
PATT SCAN: 00
ZONE SCAN: 00
ALARM OUT: OFF
EXIT
SAVE
5.8 Language Seng Opon: Language set
Open the language sengs to change the language displayed on the OSD menu.
Language: Change the language from Chinese or English
Exit: End and return to the previous menu.
Save: Save the sengs and exit the submenu
LANGUAGE: ENGLISH
EXIT
SAVE
5.9 Default Seng Opon: Default Set
Adjust the camera sengs back to the factory default.
Cancel: Cancel and exit the submenu
OK: Set the camera back to factory default sengs
Clear all presets: Clear all presets set on the camera
CANCEL
OK
CLEAR ALL PRESETS

XC960S30
17
www.xvision.com
Model XC960S30
Picture Standard PAL
Horizontal Rotaon 360°
Resoluon 960H
Minimum Illuminaon 0.01 Lux
Night Vision N/A
Lens Type 30x Opcal Varifocal Lens
Lens Size 3.9-105.3mm (2-64°)
Preset Locaons 255
Horizontal Rotaon / Speed 360° / 0.1 - 160° per second
Vercal Rotaon / Speed 0 - 90° / 0.1 - 120° per second
Baud Rate 2400 / 4800 / 9600 / 19200 bps
Protocol Pelco-D, Pelco-P
Power Supply DC 24V 2000mA
(In the next version, this camera will be 12V 5000mA)
Operaon Temperature -35°C ~ 60°C
Dimensions in mm (WxHxD) 210x350x210
Weight (Kg) 4.0
Weatherproof IP66
For more informaon, please contact our technical team. Contact details are on the back page.
1. Product Overview
6. Specicaons

XC960S30
18
www.xvision.com
1. Product Overview
Notes

XC960S30
19
www.xvision.com

TECHNICAL SUPPORT
For technical support, please contact your local distributor.
Alternatively, call 0871 222 1430.
LIMITED WARRANTY
This product is supplied with a 12 month warranty. The warranty excludes products
that have been misused (including accidental damage) and damage caused by
normal wear and tear. In the unlikely event that you encounter a problem with this
product, it should be returned to the place of purchase.
Manufactured exclusively for:
Xvision UK, Unit 2 Valley Point, Beddington Farm Road, Croydon, Surrey CR0 4WP
www.xvision.com
www.xvision.com
HD 960H