X-Vision XSD27ZIR-2 User manual

User Manual
XSD27ZIR-2
Day/Nigh 600 TVL
IR Speed Dome CCTV Camera
27x Opcal Zoom
100m Night Vision

Contents
1. OVERVIEW
1.1 BRIEF INTRODUCTION AND APPLICATION .........................................................
1.2 PRODUCT FEATURES ....................................................................................
1.3 TECHNICAL INDICATORS ................................................................................
2. HARDWARE INSTALLATION ...............................................................................
2.1 SETTING OF DIAL SWITCH .............................................................................
3. OPERATION INSTRUCTION ................................................................................
3.1 MAPPING TABLE FOR PRESET LOCATION .........................................................
3.2 KEYBOARD OPERATION ...............................................................................
3.2.1 PRESET LOCATION SCAN .....................................................................
3.2.2 AREA SCANNING ...............................................................................
3.2.3 PATTERN SCANNING ..........................................................................
3.3 MENU SET .................................................................................................
3.3.1 BASIC MENU OPERATION ....................................................................
3.3.2 MENU SET ........................................................................................ 14
3.3.3 SYSTEM INFORMATION ......................................................................
XSD27ZIR-2 - Operang Manual
4
4
5
6
6
9
9
12
12
13
13
14
14
14
6
6
8
8
8
8
2.1.1 POSITION OF DIAL ON SWITCH .........................................................................
2.1.2 ADDRESS SETTING ............................................................................................
2.1.3 POWER CONNECTION ......................................................................................
2.1.4 CONNECTION OF CONTROL LINE .....................................................................
2.1.5 CONNECTION OF VIDEO LINE ...........................................................................
2.1.6 SETTING OF BAUD RATE ...................................................................................

XSD27ZS Operang Manual
Contents
4. TROUBLESHOOTING ........................................................................................
3.3.5 CAMERA SETTING 2...........................................................................
3.3.6 PRIVACY SHELTER (OPTIONAL) ...........................................................
3.3.7 INFRARED SETTING ..........................................................................
3.3.8 AUXILIARY SETTING .........................................................................
3.3.9 SCANNING SET ................................................................................
XSD27ZIR-2 - Operang Manual
4.1 TROUBLESHOOTING TABLE ....................................................................
15
16
16
18
18
16
3.3.4 CAMERA SETTING 1 .......................................................................... 15
15
3.3.10 TITLE SET ....................................................................................... 17
3.3.11 ALARM LINKAGE ............................................................................. 17
3.3.12 LANGUAGE SETTING ....................................................................... 17
3.3.13 DEFAULTED SETTING ....................................................................... 17

XSD27ZS Operang Manual
3
SAFETY CAUTION
WARNING: User shall be reminded to avoid the risk including potenal deaths or severe
injuries.
XSD27ZIR-2 - Operang Manual
1. Please do not install this equipment in the environment with too much moisture or dust.
2. If the unit emits abnormal smell or smoke, immediately shut off the power and contact the
supplier.
3. During cleaning, please do not directly spray water on the parts of this equipemnt.
4. Please do not place the camera near a heat source to avoid fire risk.
5. It is forbidden to store, install and use this product in danger areas with inflammable or
explosive substances.
6. During transportaon, storage and installaon, please handle the product with care to avoid
damage.
7. The product should be installed away from any area with vibraon or magnec fields
interference.
8. Before moving or reinstalling the camera, please be sure that the power is shut off.
9. The camera should be installed in a site with good venlaon to avoid over heang.
10. In the event that the camera is faulty, please contact your supplier and do not disassemble or
reform the product (the manufacturer will not bare any responsibility for any problems
resulng from unapproved reformaon or repair).
11. During cleaning of the surface of the camera, do not use a chemical cleaning agent as this
may result in the deformaon of the equipment surface or damage the dome cover.
12. It is important that the dome camera is not le in a posion where the camera is poinng
directly at the sun or other extremely bright light source. This may result in CCD damage and
poor image quality.

4
1OVERVIEW
The XSD27ZIR-2 can be widely used in the in an area with low light levels, or no light where
high-speed monitoring in large scope is required, such as river, forest, road, railway,
airport, port, watch, square, park, scenic spot, street, staon, large stadium and
external boundary of living quarters, etc.
As a high-end monitoring product, the XSD27ZIR-2 features strong, stable and reliable funcons
in addin to easy operaon and installaon. This camera has many funcons, such as
fast trace, 360° unlimited rotaon, 180° automac overturn, area scan, preset locaon
scan and paern scan.
This camera applies to watching the moving target in a big area, and has the performance that
several fixed cameras cannot achieve. Therefore it is widely used in various areas
such as airport, staon, superstore, polical-legal organ, bank, enterprise, warehouse,
hospital, etc.
1.2 PRODUCT FEATURES
Supporng CVBS standard definion video signal output
Driven by accurate step motor, with stable running and low noise
Up to 255 programmable preset locaons
Several scan modes such as area scan, preset locaon scan, paern scan, etc.
Mul-funcon Chinese-English menu with flexible and easy configuraon
Vercal and automac over turn funcon can realize the connuous watch without
blind area
Telephoto and limit speed funcon provides a clear and stable monitoring picture
Self-adapve baud rate and communicaon protocol
Non-polarity RS485 supports broadcast address and so address
Supporng failure detecon indicaon for RS485 communicaon
IP66 Protecon grade: IP 66
Infrared dome supporng night vision funcon
Ultra lowpower consumpon and ultra-strong stability
1.1 BRIEF INTRODUCTION AND APPLICATION
XSD27ZIR-2 - Operang Manual

5
1.3 TECHNICAL INDICATORS
No. ItemTechnical Indicator
1 Video standard PAL/NTSC
2 Horizontalrotaon scope360° connuous rotaon
3Vercalrotaon scope 0°～90°automac overturn
4Horizontaloperaon speed0.1～300°/s
5Vercal operaon speed0.1～240°/s
6Prese locaon running
speed300°/s
7Preset locaon accuracy ± 0.10°
8Preset locaons255
9Menu operaon Supporng mul language (Chinese and English)
10 Funcon display
Yes
11 Coordinatedisplay Yes
12 Communicaon Failure
detecon and indicaon
Yes (errorindicaons such as baud rate error,address error,
protocol unmatched, etc.)
13 Editablearea to beblocked8 areas
14 Preset locaon scan4 (32 preset locaonsforeachroune)
15 Rounescan4 (leand right boundaries, speedand area namecan beset)
16 Paern scan4 (there are no less than200 instruconsforeachroune)
17 Watch locaon funcon
Yes
18 Timing running Supporng 8meintervals
19 Integratedprotocol PELCO-D,PELCO-P,Industrialprotocol, DH-SD1,YAAN
self-adapon
20 Communicaon baud rateSelf-adaptaon 2400/4800/9600/19200 bps
21 RS485 Supporng non-polarity
22 Telephoto and limit speed Yes
XSD27ZIR-2 - Operang Manual

6
No. ItemTechnical Indicator
23 Power-off memory Yes
24 Screen freeze Yes
25 Compable camera Automac Idenficaon SONY/HITACH/CNB/SAMSUNG)
26 Protecon grade IP66
27 Lighning protecon 3000 V
28 Working temp -35
°C ～+60 °C
2HARDWARE INSTALLATION
Address Dial Switch: when the so address is closed, the dome address will be
determined by the dial switch.
So Address: Aer the So address opon is opened, the address dial switch will not
work. The default so address will also be closed.
Broadcasng Address: the fixed broadcasng address of dome if 100; no maer how
the dome address is set, key DVR is able to control the dome through 100 addresses.
2.1.2 ADDRESS SETTING
The address of dome can be set in three ways:
XSD27ZIR-2 - Operang Manual
2.1 SETTING OF DIAL SWITCH
2.1.1 POSITION OF DIAL ON SWITCH

XSD27ZS Operang Manual
7
Address 1 2 345678
0
1 ON OFF
2 OFF ON
3 ON ON
4 OFF OFF
5 ON OFF
6 OFF ON
7 ON ON
.
.
.
250 OFF ON
251 ON ON
252 OFF OFF
253 ON OFF
254 OFF ON
255 ON ON
Comparison list of address dial switch:
OFF OFF OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
OFF ON ON ON ON ON
OFF ON ON ON ON ON
ON ON ON ON ON ON
ON ON ON ON ON ON
ON ON ON ON ON ON
ON ON ON ON ON ON
XSD27ZIR-2 - Operang Manual

XSD27ZS Operang Manual
8
XSD27ZIR-2 - Operang Manual
Rated Voltage (V)
DC 12V
Scope of rated voltage
Posive & Negave 10%
Current
>4A
2.1.3 POWER CONNECTION
2.1.4 CONNECTION OF CONTROL LINE
PTZ control: RS-485 control line is connected to the control keyboard or
DVR. If several cameras are controlled at the same me, RS-485 control line shall
be set in parallel.
Note:
① RS-485 control line can be connected arbitrarily
② The protocol and Baudrate controlling keyboard or digital video recorder
can be set arbitrarily
③ Several cameras in monitor network can be set with different dome addresses.
2.1.5 CONNECTION OF VIDEO LINE
BNC joint is used to connect video signal line directly.
2.1.6 SETTING OF BAUD RATE
Baud rate 2400, 4800, 9600 recognised automacally.

XSD27ZS Operang Manual
9
3. OPERATION INSTRUCTION
3.1 MAPPING TABLE FOR PRESET LOCATION
Preset Locaon Funcon
95+CALL Entering themain menu
XXX+PRESET Saving some preseng point
XXX+CALL Calling some preseng point
40+CALL Operang thefirst groupof preset locaon scanning
41+CALL Operang thesecond groupof preset locaon scanning
42+CALL Operang thethird groupof preset locaon scanning
43+CALL Operang the fourth groupof preset locaon scanning
44+CALL Seng theleboundary of area scanning 1
45+CALL Seng the right boundary of area scanning 1
46+CALL Seng theleboundary of area scanning 2
47+CALL Seng the right boundary of area scanning 2
48+CALL Seng theleboundary of area scanning 3
49+CALL Seng the right boundary of area scanning 3
50+CALL Seng theleboundary of area scanning 4
51+CALL Seng the right boundary of area scanning 4
52+CALL Operang area scanning 1
53+CALL Operang area scanning 2
54+CALL Operang area scanning 3
55+CALL Operang area scanning 4
56+CALL Starng theseng of paern scan
57+CALL Saving theseng ohefirst groupof paern scanning
XSD27ZIR-2 - Operang Manual

10
58+CALL
59+CALL Saving the seng of the third group of paern scanning
60+CALL
61+CALL Operang thefirst groupof paern scanning
62+CALL Operang thesecond groupof paern scanning
63+CALL Operang thethird groupof paern scanning
64+CALL Operang the fourth groupof paern scanning
65+CALL Starng 360° connuous rotaon
67+CALL Arming of alarming input1 (forthemachines with this
funcon only)
68+CALL Arming of alarming input2 (forthemachines with this
funcon only)
69+CALL Disarming of alarming input1 (forthemachines with
this funcon only)
70+CALL Disarming of alarming input2 (forthemachines with
this funcon only)
71+CALL Starng alarming output(forthemachines with this
funcon only)
72+CALL Closing alarming output (forthemachines with this
funcon only)
75+CALL Starng thedisplay ofstatus column
76+CALL Closing thedisplay ofstatus column
77+CALL Starng vercalflip
78+CALL Closing vercalflip
79+CALL Starng guarding funcon
80+CALL Closing guarding funcon
81+CALL Starng the privacy shelter grid(forthemachines with
this funcon only)
Saving the seng of the third group of paern
scanning
Saving the seng of the third group of paern
scanning
XSD27ZIR-2 - Operang Manual

11
82+CALL Closing the privacy shelter grid(forthemachines with
this funcon only)
83+CALL Starng backlight compensaon (forthemovement with
this funcon only)
84+CALL Closing backlight compensaon (forthemovement with
this funcon only)
85+CALL Starng image freezing funcon(forthemovement with
this funcon only)
86+CALL Closing image freezing funcon(forthemovement with
this funcon only)
87+CALL Starng imagemirror funcon(forthemovement with
this funcon only)
88+CALL Closing imagemirror funcon(forthemovement with
this funcon only)
89+CALL Automac color-to-blackfuncon(forthemovement
with this funcon only)
90+CALL Starng color-to-blackfuncon(forthemovement with
this funcon only)
91+CALL Closing color-to-blackfuncon(forthemovement with
this funcon only)
92+CALL Closing widedynamic(forthemovement with this
funcon only)
93+CALL Automac widedynamic(forthemovement with this
funcon only)
94+CALL Manual widedynamic(forthemovement with this
funcon only)
95+CALL Entering themain menu
97+CALL Starng image rollover(forthemovement with this
funcon only)
98+CALL Closing image rollover(forthemovement with this
funcon only)
101+CALL Defaulted seng
102+CALL Switch manual operaon speed(fast, slow and medium)
XSD27ZIR-2 - Operang Manual

12
103+CALL Switching linearscanning speed(fast, slow and
medium)
105+CALL Starng digital zoom
106+CALL Closing digital zoom
107+CALL 、108+CALL
109+CALL Starng communicaon fault indicaon
110+CALL Closing communicaon fault indicaon
3.2 KEYBOARD OPERATION
Set preset locaon scan: Preset locaon scan roune can be set using 2 ways:
See ‘Menu set -> Scan Set’
There are a total of 4 preset locaon rounes and 32 preset locaons that can be set. The
40th and 43rd preset locaons are in turn used to set and call the 1st and 4th preset
locaon rounes:
1) Execute the command of seng 40th preset locaon to enter the set status
2) Call the desired set opon to the preset locaon in rounes, such as the first, the second,
etc.
3) Wait a desired me to stay (the interval me between two locaon), and do not
conduct any operaon.
4) Call next roune that you want to set to preset locaon. If there are unused preset
locaon, add it into roune, execute in looping way the 3) and 4), or execute 5) and the
set is over.
5) Execute the command of seng 40th preset locaon, and save the set and exit in
addion to calling preset locaon. Execung any command other than, such as up, down,
right or le does not need to be saved before exit.
Run preset locaon scan: call 40th - 43rd preset locaons to run 1st-4th group preset scan
locaon series.
3.2.1 PRESET LOCATION SCAN
1.
2.
Calling 107 followed by 108 and restarng thedome
XSD27ZIR-2 - Operang Manual

13
Seng the area of scanning
Seng of the le boundary: dome is controlled to ideal posion and preset locaon
44 is called to set the le boundary of Region 1
Seng of the right boundary: dome is controlled to ideal posion and preset locaon
45 is called to set the right boundary of Region 1
Seng of the scanning speed: see “Menu set-> Auxiliary set”
Seng of the regional tle: see “Menu set > Title Set”
Operang area scanning
Call the preset locaon 52-55 to operate area scanning path 1-4 respecvely
Dome rotates between the set right and le boundary according to the set speed and
the screen displays the corresponding regional tle.
3.2.2 AREA SCANNING
Seng of paern scanning
1. Call preset locaon 56 to start seng paern scanning
2. Operate ‘up, down, le, right, WIDE, TELE, NEAR, FAR, CLOSE and OPEN on the dome.
3. Call preset locaon 57-60 to save the 1-4 paern scanning
Operaon of paern scanning
Call the preset locaon 61-64 to operate paern scanning path1-4 respecvely
3.2.3 PATTERN SCANNING
XSD27ZIR-2 - Operang Manual

XSD27ZS Operang Manual
14
1. Press control on the keyboard or use matrix to execute the command of ‘call 95th preset
locaon’ to enter and set main menu
2. Aer the main menu page appears, press ‘up or down’ icon to move the cursor to the
sub menu opon to be set and press ‘right’ icon to enter this submenu seng page
3. Aer sub menu page appears, press ‘up or down’ icon to move the cursor to the opon
to be set and press ‘right’ icon to change or set the content of this opon
4. The contents normally fall into 2 types; Digit type and List Type. The blink indicaon
means that the content of the opon can be changed.
For Digit type: press the 'le or right' icon to select the input locaon, press 'up or down
icon to modify the value. To confirm and quit the opon seng, move the cursor to the
last digit and press 'right'.
For List type; press 'up or down' to modify the content of opon and press 'right' to
confirm and quit the opon seng.
3.3.1 BASIC MENU OPERATION
3.3 MENU SET
MAIN MENU
1. System Informaon: Check dome informaon (such as version, address, communicaon,
etc.)
2. Camera Seng: Set the camera parameters
3. Privacy Shelter: Set the parameters for privacy masking
4. Infrared Seng: Set infrared lamp funcon on the camera
5. Auxiliary Seng: Set some auxiliary parameters of the dome
6. Scanning Seng: Set the scan sequence of preset locaon
7. Title Seng: Set regional tle by input method
8. Alarm Linkage: Alarming seng
9. Language seng: Chinese and English
10. Defaulted Seng: Recovery the defaulted seng of the dome
11. Exit: Exit the main menu
3.3.2 MENU SET
1. Version No. : The version number of the dome fixed ware
2. Address: Dome address to be set by dial switch
3. Communicaon: Communicaon Baud rate
4. Protocol: Communicaon protocol PELCO-D
5. Exit: Exit the sub menu of system informaon
3.3.3 SYSTEM INFORMATION
XSD27ZIR-2 - Operang Manual

XSD27ZS Operang Manual
15
1. Zoom Speed: Fast, medium and slow
2. Digital Zoom: On and off
3. White Balance: Automac, Indoor, outdoor, manual
4. R gain: 0-225 (white balance manually effecve)
5. B gain: 0-225 (white balance manually effecve)
6. Exposure Seng: 0-14 (0: Darkest, 14: Lightest)
7. Backlight Compensaon: On and off
8. Image Freezing: On and off
9. Next Page: Next sub menu
10. Exit: Exit the sub menu without saving the modificaons
11. Save: Save the sengs and exit the sub menu
3.3.4 CAMERA SETTING 1
1. Wide Dynamic Mode: Automac, off and manual
2. Wide Dynamic Level: 0-128 (Wide dynamic manually effecve)
3. Image Mirror: On and off
4. Colour-to-Black Seng: Automac, on and off
5. Image Effect: Off, inverse colour and white-band-black
6. Image Rollover: On and off
7. Camera Display: On and off
8. Minimum Focus: 1cm, 10cm, 30cm and 100cm
9: Last Page: Last sub menu
10. Exit: Exit the sub menu without saving the modificaons
11. Save: Save the sengs and exit sub menu
3.3.5 CAMERA SETTING 2
XSD27ZIR-2 - Operang Manual
3.3.6 PRIVACY SHELTER (OPTIONAL)
SEQUENCE WIDE HIGH DIS
100 OFF
2OFF
3OFF
4OFF
5OFF
6OFF
7OFF
8OFF
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00

XSD27ZS Operang Manual
16
1. Infrared Flexibility: 0-999
2. Infrared Lamp Mode: Automac, on and off
3. Synchronouse Colour-to-black: On and off
4. Wide Bright: 0-30
5. Enter Tele Bright: 0-100
3.3.7 INFRARED SETTING
1. Area Scanning Speed: Fast, Meduim and slow
2. Manual Rotaon Speed: Fast, medium and slow
3. Guarding Posion: Preset locaon 0-225 (0: closing the guard posion)
4. Recall Time: Set the me for automac recall and duraon when it will not be controlled
or return to the guard posion. Time: 0-225s
5. Vercal Automac Rollover: Dome 180 automac rollover on/off
6. Seng of Status Bar: On and off
7. Zoom Rev: On and off
8. So Address On and Off: On and off
9. So Address: 001-225
10. POW Acon: None, preset scan, pat scan, preset etc
11. Exit: Exit the sub menu without saving modificaons
12. Save: Save the sengs and exit sub menu
3.3.8 AUXILIARY SETTING
1. Seng of Area Scanning: (1-4)
2. Operang Area Scanning: (1-4)
3. Seng Preseng Scanning: (See fig. 1)
4. Operang Preseng Scanning: (1-4)
5. Seng of Mode Scanning: (1-4)
6. Operang Mode Scanning: (1-4)
7. Exit: Exit the sub menu without saving modificaons
8. Save: Save the sengs and exit sub menu
3.3.9 SCANNING SET
XSD27ZIR-2 - Operang Manual
0
Fig. 1
Scanning Group No.: 1
No. Preseng bit Time
01 001 005
02 002 005
03 003 005
04 004 005
05 000 000
06 000 000
07 000 000
08 000 000
Last Page
Next Page
Exit
Save

XSD27ZS Operang Manual
17
3.3.10 TITLE SET
XSD27ZIR-2 - Operang Manual
1. Region No.: 1-4
2. X Co-ordinates: X posion of tle on the screen (0-29)
3. Y Co-ordinates: Y posion of tle on the screen (0-14)
4. Title: The tle content in the current region. Operate “le and right” to select the posion
and to insert characters. Operate “Up” to exit this opon.
5. Mode: Input method mode (Capitalised and lower case characters, symbols and numbers)
6. Selecon of Chinese Characters: Used for the input of Chinese characters. Operate “Le and Right”
to move the cursor, operate “Down” to select the Chinese character and operate “Up”
to exit this opon
7. So Key: Used for inpung characters, operate “Le and Right” to move the cursor, operate
“Down” to select characters and “Up” to exit this opon.
8. Delete: To delete the characters
9. Exit: Exit the sub menu without saving the modificaons
10. Save: Save the sengs and exit the sub menu
3.3.11 ALARM LINKAGE
1. Alarm Input: Alarm input No. (1 and 2)
2. Input Type: On and off
3. Arming Time: H : M
4. Disarming Time: H : M
5. Preseng Scanning: Linkage preset locaon scanning No.(0-4), 0 means scan without link
preseng.
6. Paern Scanning: Linkage paern scanning No.(0-4), 0 means paern scan without linking
7. Area Scanning: Linkage area scanning No.(0-4), 0 means area scan without linking
8. Alarm Output: On and off
9. Save: Save the sengs and exit the sub menu
10. Exit: Exit the sub menu without saving the modificaons
Note: In the case of any conflict of linkage acon, the first linkage acon will be executed.
3.3.12 LANGUAGE SETTING
1. Language Seng: Chinese and English
3.3.13 DEFAULTED SETTING
1. Cancel: Cancel and exit the sub menu
2. Enter: Perform the default seng and exit the sub menu

4TROUBLESHOOTING
Phenomenon Possible Cause Countermeasures
Power damageorinsufficient
power
Changeit
Errorconnecon ofpower
line
Faults of engineering route
Mechanicalfault
Inclinedcamera
Insufficient power supply
Normal self-inspecon but no
image
Errorvideolines
Poorvideolineconnecon
Camera damage Changeit
XSD27ZS Operang Manual
18
Successful self-inspecon but
out ofcontrol
Errorconnecon ofcontrol
signallineCorrect it
Unmatcheddome address
Too far distance and too large
delay of485signal
Wire diameter in twisted-pairor
thicker control line
Unstableimage
Poorvideolineconnecon Eliminateit
Insufficient power supply Changeit
No acon or image aer
electrifying Correct it
Eliminate it
Inspect it
Adjust it
Correct it
Eliminate it
Abnormal self-inspecon;
image exists but with motor
noise
Select it again
Adjust the protocol or controller to
make it match and electrify again
Unmatched protocol or
communicaon Baud rate
Change the power complying with
the requirements and put the
switch power near the dome
XSD27ZIR-2 - Operang Manual
4.1 TROUBLE SHOOTING TABLE