manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Digimerge
  6. •
  7. Security Camera
  8. •
  9. Digimerge DPD14T User manual

Digimerge DPD14T User manual

Other Digimerge Security Camera manuals

Digimerge DCV23DL User manual

Digimerge

Digimerge DCV23DL User manual

Digimerge DCBHR1535 User manual

Digimerge

Digimerge DCBHR1535 User manual

Digimerge DPV24D User manual

Digimerge

Digimerge DPV24D User manual

Digimerge DPV14W User manual

Digimerge

Digimerge DPV14W User manual

Digimerge DCBHR1037 User manual

Digimerge

Digimerge DCBHR1037 User manual

Digimerge DPV24D User manual

Digimerge

Digimerge DPV24D User manual

Digimerge DPV24DL User manual

Digimerge

Digimerge DPV24DL User manual

Digimerge DNZ9320W User manual

Digimerge

Digimerge DNZ9320W User manual

Digimerge DPV24DL User manual

Digimerge

Digimerge DPV24DL User manual

Digimerge DPB14TLX User manual

Digimerge

Digimerge DPB14TLX User manual

Digimerge DNP5220E User manual

Digimerge

Digimerge DNP5220E User manual

Digimerge DPP22W Manual

Digimerge

Digimerge DPP22W Manual

Digimerge DCV13TL User manual

Digimerge

Digimerge DCV13TL User manual

Digimerge DNZ9320W User manual

Digimerge

Digimerge DNZ9320W User manual

Digimerge DPD24W Manual

Digimerge

Digimerge DPD24W Manual

Digimerge DND7220 Series User manual

Digimerge

Digimerge DND7220 Series User manual

Digimerge DPZ16TO27 User manual

Digimerge

Digimerge DPZ16TO27 User manual

Digimerge DPD23D User manual

Digimerge

Digimerge DPD23D User manual

Digimerge DCDHR2532 User manual

Digimerge

Digimerge DCDHR2532 User manual

Digimerge DCBHR1535 User manual

Digimerge

Digimerge DCBHR1535 User manual

Digimerge DBD14 User manual

Digimerge

Digimerge DBD14 User manual

Digimerge DPV14D User manual

Digimerge

Digimerge DPV14D User manual

Digimerge DPP12D Manual

Digimerge

Digimerge DPP12D Manual

Digimerge DPV14D User manual

Digimerge

Digimerge DPV14D User manual

Popular Security Camera manuals by other brands

ADEMCO RapidDome Owners Operating & Installation Guide

ADEMCO

ADEMCO RapidDome Owners Operating & Installation Guide

EverFocus EBA2880 user manual

EverFocus

EverFocus EBA2880 user manual

Honeywell OptiCAM-IR Installation and setup guide

Honeywell

Honeywell OptiCAM-IR Installation and setup guide

Uniq UC-600 user manual

Uniq

Uniq UC-600 user manual

OPTICOM NVD-120-S datasheet

OPTICOM

OPTICOM NVD-120-S datasheet

Steren CCTV-221 instruction manual

Steren

Steren CCTV-221 instruction manual

Arm Electronics C420BCDNVFIR Features

Arm Electronics

Arm Electronics C420BCDNVFIR Features

Eneo PLD-2036PTZ installation guide

Eneo

Eneo PLD-2036PTZ installation guide

Axis AXIS M20 Series installation guide

Axis

Axis AXIS M20 Series installation guide

Panasonic KX-HCM230 operating instructions

Panasonic

Panasonic KX-HCM230 operating instructions

COP-USA CC15NV-SL Specifications

COP-USA

COP-USA CC15NV-SL Specifications

Active Silicon HARRIER H.264 quick start guide

Active Silicon

Active Silicon HARRIER H.264 quick start guide

Motorola Avigilon 1.3C-H5SL-BO1-IR installation guide

Motorola

Motorola Avigilon 1.3C-H5SL-BO1-IR installation guide

INSTEON 2864-232 user manual

INSTEON

INSTEON 2864-232 user manual

Wisenet XNB-6002 quick start guide

Wisenet

Wisenet XNB-6002 quick start guide

Axis M5525-E user manual

Axis

Axis M5525-E user manual

Vitek VTC-IR62NZ922 user guide

Vitek

Vitek VTC-IR62NZ922 user guide

Panasonic WV-SF342 Specifications

Panasonic

Panasonic WV-SF342 Specifications

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

V I S I O N
POLARIS
2
model: DPD14T
ii
WARNINGS AND CAUTIONS:
CAUTION:
CAUTIONCAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by the qualified
personnel before operating it any further.
Unplug the unit from the wall oulet if it is not going to
be used for several days or more. To disconnect the
cord, pull it out by the plug. Never pull the cord itself.
Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials(curtains, draperies)
that may block the ventilation holes.
Height and vertical linearity controls located at the
rear panel are for special adjustments by qualified
personnel only.
Do not install the unit in an extremely hot or
humid place or in a place subject to excessive
dust, mechanical vibration.
The unit is not designed to be waterproof.
Exposure to rain or water may damage the unit.
Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use
strong solvents such as thinner or benzine as
they might damage the finish of the unit.
Retain the original carton and packing
materials for safe transport of this unit in the
future.
Safety ----------------------------------------- Installation -----------------------------------
Cleaning --------------------------------------
PRECAUTIONS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.
iii
FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED
AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS
OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT
GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN
A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL
INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003.
NORME NMB-003 DU CANADA.
WARNING
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required
to take adequate measures.
CE COMPLIANCE STATEMENT
FCC COMPLIANCE STATEMENT
iv
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
product heat..
9. Do not defeat the safety purpose of the polarized or grounding-type
Plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for
long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE
BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE
RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
15. Use Certified/Listed Class 2 power source only.
thy
IMPORTANT SAFEGUARDS
INTRODUCTION
1
The camera provides high-quality images using SONY 1/3" CCD and digital signal
processing LSIs.
Features:
1/3" Super HADII CCD for an image of high sensitivity
Digital Wide Dynamic Range
Excellent picture quality
560 lines of resolution
0.25 Lux(Color), 0.01 Lux(B/W)@ F1.2 Sensitivity
Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic shutter modes
OSD (On Screen Display)
Auto and manual white balance modes
Selectable BLC Zone
HSBLC
3D-Digital Noise Reduction
Day&Night (Auto/Manual)
Privacy Zone 8 point, Motion Detection 4 Point
SHARPNESS, D-ZOOM, NEGA/POSI, MIRROR, V FLIP, ROTATION, FREEZE
AGC (Auto Gain Control)
VIDEO OUT(BNC)
Internal/AC line lock
2.8~12mm
Operates in 12VDC or 24VAC
Use Certified / Listed Class 2 power source only.
(Xtended Dynamic Range)
D&N Auto Iris Lens
IMPORTANT : The user of this camera is responsible for checking
and complying with local, state, and federal laws and statutes concerning
the recording and monitoring of audio signals.
CAUTION: Before plugging in, please check the label to make sure you have the proper rating.
CAMERA CONNECTIONS
1
3
2
1. Lens : Allows a wide area to be monitored.
2. Color Lead Wire & Color Display Label
2
3. Power : power source from a DC 12V / AC24V +/- 10%
Use Certified/Listed Class 2 power supply transformer only.
*If use DC 12V / AC24V power adaptor, use the power consumption 5W over.
REMINDER:
Never aim the
camera directly
into the sun.
COLOR
RED
WHITE
YELLOW
GRAY
BLACK
DESCRIPTION
AC24V/DC12V
AC24V/DC12V
ALARM OUT
DN EXT-IN
DN EXT-OUT
GND
BLACK&WHITE
4. Video : BNC connector used to connect the camera to a monitor, switcher, etc.
COLOR
RED
WHITE
YELLOW
GRAY
BLACK
DESCRIPTION
AC24V/DC12V
AC24V/DC12V
ALARM OUT
DN EXT-IN
DN EXT-OUT
GND
BLACK&WHITE
5. DAY&NIGHT I/O Terminals
To select Day/Night mode using external equipment, connect control lines
to the appropriate terminals.
DAY&NIGHT OUTPUT
It is the function that can turn on external IR LED Lamp by detecting the sensitivity on
the AGC level when the D&N mode is set "AUTO" on the OSD menu of the camera.
DAY&NIGHT EXTERNAL INPUT
It is the function that can be switched to DAY Mode or NIGHT Mode by receiving the
D&N on/off signal from external light sensor or IR LED LAMP. When D&N Mode is set
"External" on the OSD menu of the camera.
6. ALARM OUT
Motion detection signals are output through this port. (On High (5V))
DN EXT-OUT
GND
5V/10mA : IR LED ON(NIGHT)
0V : IR LED OFF(DAY)
GND
DN EXT-IN
Open contact : DAY
Close contact : NIGHT
INSTALLATION
Dome body
Liner
1. Make mounting holes and cable hole in the place (ceiling or wall) to which this dome
camera is installed using the Drilling guide label.
PACKAGE CONTENTS
The package contains the following.
Camera in Housing 1
Instruction Manual (This Document) 1
Accessory Kit for Installing 1
1Drilling guide label
3
2. Push the liner on the sides where the patterns are put in the teeth of a
comb and pull it out.
To remove dome cover, turn the dome body counterclockwise until locators reach end of
travel and pull off.
Screw Tapping (M6)
Drilling Guide Label
Plastic anchor
Drilling Position(PA5)
WALL
4
3. Attach the housing to the ceiling using suitable fasteners, M6x35 tapping screws are
supplied only use if they are suitable. Turn the housing to right direction about 16 degrees
to lock in place.
4. The assembly of the dome body and liner is in reverse order of disassembly.
Finally, lock dome body with locking screw(M3X5) from the accessory kit.
OPERATING CAMERA
Enter Button
Up
Down
Left
Right
Spot Video Out
1
2
3
4
5
6
12345
6
The housing can also be mounted
on a 4s electrical box.
MOUNTING HOUSING TO
AN ELECTRICAL BACK BOX
Electrical box
Torx screws
UNC 8-32 x 0.75
Rubber
Washers(4x)
5
STRUCTURE OF THE SETUP MENU
<SETUP>
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
<LENS>
DC
<EXPOSURE>
SHUTTER
BRIGHTNESS
AGC
SENSE-UP
BLC
D-WDR
RETURN
<WHITE BAL> <DAY NIGHT>
AUTO
EXT
B/W
COLOR
<3DNR>
LEVEL
RETURN
<SPECIAL>
CAM TITLE
D-EFFECT
MOTION
PRIVACY
SYNC
LANGUAGE
RETURN
<ADJUST>
SHARPNESS
BLUE
RED
RETURN
<RESET>
FACTORY
RETURN
AWB
AWC -> SET
MANUAL
INDOOR
OUTDOOR
ATW
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to point to
'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
LENS (Selection)
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►LENS
BRIGHTNESS IIIIIIIIIIIIIIIIII 50
RETURN RET
►
Note The brightness of the screen can be adjusted in DC mode.
The brightness can be adjusted within the range of 0 ~ 100.
The optimum level of brightness for the user can be achieved by adjustment.
EXPOSURE
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►
EXPOSURE
SHUTTER 1/60
BRIGHTNESS IIIIIIIIIIIIIIIIII 50
AGC HIGH
SENSE-UP AUTO
BLC BLC
D-WDR OFF
RETURN RET
►
The EXPOSURE menu is used to set the automatic light control method for this camera.
(Xtended Dynamic Range)
1) SHUTTER Select the shutter mode.(1/60(50), FLK~ 1/100,000 sec, x2 ~ x256)
Can be changed while in shutter mode.
2) BRIGHTNESS Adjust BRIGHTNESS level (0 ~ 100)
Can be adjusted while in manual lens mode.
3) AGC Auto gain control (OFF / LOW / MIDDLE / HIGH)
4) SENSE-UP Use under very low light condition for full color surveillance.
Select maximum Low-Shutter value. (x2 ~ x256)
5) BLC Sharpens subjects with backlight.(OFF / BLC / HBLC)
6) D-WDR Digital Wide dynamic range
OFF / INDOOR / OUTDOOR
6
BLC
GAIN MIDDLE
DEFAULT
LEFT/RIGHT IIIIIIIIIIIIIIIIII 2
WIDTH IIIIIIIIIIIIIIIIII 4
TOP/BOTTOM IIIIIIIIIIIIIIIIII 3
HEIGHT IIIIIIIIIIIIIIIIII 3
RETURN RET
►
<BLC MODE>