XAG CM12500P User manual

CM12500P Battery Charger
User Manual
EN
Version AU V1.0

Carefully read and understand this User Manual before using this product for the first time. Failure
to read and follow the instructions may result in serious injury to yourself and/or others, and damage
to your Products and/or other objects in the vicinity. By using this product, you hereby signify that
you have read this document carefully and that you understand and agree to abide by all terms and
conditions of this document and all relevant documents of this product. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. XAG
accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from
the use of this product.
XAG reserves the rights for final interpretation and revision of the Terms and conditions herein to
the extent permitted by law. XAG also has the right to update, modify or terminate these terms and
conditions via its official website without prior notice.
This document and all other collateral documents are subject to change without prior notice at the
sole discretion of XAG.
Disclaimer
Warning
This product must be operated with Strong safety awareness. Failure to operate this product in a
safe and responsible manner could result in injury or damage to the product or other property. This
product is not intended for use by those who are under 18 years old. DO NOT alter this product or use
this product with incompatible components or parts.

XAG AUSTRALIA
4
Product Profile
CM12500P Battery Charger is compatible to B13930S Battery, it is also compatible to B13860S
Battery with Plug A1 Adapter. Additionally, CM12500P features the following functions: Overcurrent
protection, Overheat protection, Under-voltage protection, Fault Isolation, and Status Indicator.
Battery Charger will terminate the charging process and switch off the battery automatically when
the battery is fully charged.
List of Item
SuperCharger
X1
16A Power Cable
X1
Overview – CM12500P Battery Charger
AC Power Port
Power Input
Indicator
Cooling Fan
Handle Charging
Terminal
Charging Output
Indicator

5
XAG AUSTRALIA
Power Input indicator Status Description
Solid Green Normal Normal
Flashing Green Not Grounded Risk Exist
Solid Red Error Protection Triggered – Output
OFF
Flashing Red Overheated Protection Triggered – Output
OFF
Status Indicator
Charging Output indicator Status Description
Solid Green Idle Idle
Flashing Green Oine No Battery or Connection error
Solid Red Charging Charging

XAG AUSTRALIA
6
01. Connect the Power Port and AC Power source with the 15A Power cable.
02. Connect the Charger Terminal to the Battery Terminal.
03. Power ON the Battery to Start Battery charging.
📖INSTRUCTION
Battery Charging
√ENSURE there are no obvious defects on the Battery or the Charger before use.
√ENSURE there is no liquid or foreign matter on the battery terminal, wipe and clean in a timely
fashion. Otherwise, it may cause poor contact, resulting in loss of power or charging failure.
√ENSURE Battery & Chargers is placed on even ground with no nearby combustible materials.
√ENSURE Batteries have a minimum of 30cm distance between the batteries and Chargers
during Charging.
X DO NOT clean the charging device with alcohol or other combustible liquids.
X DO NOT disconnect the AC cable or the Charging cable while the Charger is in use. Remove
batteries after charging is completed.
X DO NOT use this product under direct sunlight, in rain, or in a humid environment.
🧷IMPORTANT
The battery management system will automatically suspend the charging if the temperature is over
55° C, and resume after the temperature drops below 55° C. The ideal ambient charging temperature
(20° - 35° C) for charging helps maintain the normal service life of the battery.
The battery level indicators corresponding to the current battery level will be solid green, and the
remain will be flashing in series indicating the battery is currently charging. Once the charging is
completed, the buzzer will beep for 30secs and all the battery level indicators will flash for 2 minutes,
then the battery will turn off automatically.

7
XAG AUSTRALIA
Charging with CM12500P Battery Charger
Charging with GC4000+ Auto SuperCharger Station
Charging with GC4000+ Auto SuperCharger Station with Water-Cool Charging Tank

XAG AUSTRALIA
8
Technical Specifications
Model CM12500P
Compatible Battery B13960S
B13860S (With Plug A1 Adapter)
Dimensions 242mm x 137mm x 337mm
Weight Approx. 9.0 kg
Operating Temperature -10° C to 45° C
Storage Temperature -20° C to 55° C
Cooling Mode Outer Air Cooling
Operating Altitude ≤ 3000m
Input AC 90-165V ~ 50/60Hz 23A (Max)
AC 180-260V ~ 50/60Hz 23A (Max)
Output
DC 50-60V/25A (Max) / 1250W (AC 90-165V ~
50/60Hz)
DC 50-60V/50A (Max) / 2550W (AC 180-260V ~
50/60Hz)
Warranty Details 12 Months

The copyright of all information in this user manual (including but not limited to any text description, illustrations,
photos, methods, processes, etc.) belongs to XAG Australia and is protected by copyright law. No individual
or organization may imitate, extract, translate, distribute or reproduce or quote all the contents of this manual
without any written authorization.
Copyright©2022 XAG Australia All Rights Reserved