Xante Ilumina User manual

Repacking and Shipping Guide
110/220 volt edition
XANTÉ CORPORATION
2800 Dauphin St., Suite 100
Mobile, AL 36606-2400
P.O. Box 16526, Mobile, AL 36616-0526
Phone: [phone]
Fax: [phone]
Web Site: www.xante.com
2/23/09

To properly return the Ilumina to Xante for service work, it is important
to follow these guidelines for repacking the Ilumina. Failure to properly
repack the Ilumina for shipping may result in damage to the machine
during transport and may void any warranty associated with the
Ilumina.
Unload paper and insert packing support piece for shipping.
OPTION 1: Remove the toner drums and install a standard piece of shipping
foam (12”x17”) on top of the transfer belt to prevent damage
during transport. Do not reinstall the toners or drums.

OPTION 2: Remove the toners from the drums and install a piece of shipping
foam to prevent toner spillage during transport. Do not reinstall
the toners onto the drums.
OPTION 3: Leave the toner drums in place and intact for transport.

Close operator panel , front cover, waste toner bottle, and paper trays.
Install shipping tape to secure these parts for transport.
Failure to properly follow these instructions may void your
service warranty and cause other damages during shipping.

Using at least 2 people, lift the Ilumina and place it in the original
shipping box.
Install packing materials to prevent damage to the Ilumina during
shipping.
Replacement packing materials can be ordered directly from XANTE
Technical Support.
Outer Box Part Number - 180-100090
Outer Base Part Number - 180-100090-A
Accessory Filler Box Part Number - 180-100091
Replacement Foam Packing Part Number - 180-100092

USING REPLACEMENT PACKAGING:
If you are using the replacement box set offered by Xante, then open the
replacement box by cutting the tape along the box base. The printer will be
placed onto the box base to continue packing.
Once the printer is packed correctly on the box base, the outer box slides
over the packaged assembly and taped up for shipping.
All products should be shipped to:
XANTE Corporation
2704 Dauphin Street
Mobile, Alabama
36606-2400