Xante ScreenWriter Colour ScreenWriter User manual

_____________________________________________________ i
110/220 volt edition
CS - v1
5/21/01
100-100509

iibb ____________________________________________________
Trademarks
XANTÉ®, and ScreenWriter®are registered trademarks of XANTÉ
CORPORATION, registered in the United States Patent and Trademark
Office. X-ACT™ and FilmStar™ are trademarks of XANTÉ
CORPORATION.
Adobe®, Adobe®Illustrator®,Adobe®PageMaker®, Adobe®Photoshop®,
Adobe®PostScript®, Adobe Type Manager®, and the ATM®and PostScript®
logos are registered trademarks of Adobe Systems Incorporated, registered
in the United States Patent and Trademark Office. Adobe®Acrobat™,
Adobe®PostScript® 3™, and Adobe®Separator™ are trademarks of Adobe
Systems Incorporated which may be registered in certain jurisdictions.
EtherHelp™ is a trademark of the AG Group. Aldus®is a registered
trademark of Aldus Corporation, registered in the United States Patent and
Trademark Office. Apple®, AppleTalk®, ColorSync®, EtherTalk®,
LaserWriter®, iMac®, and Macintosh®are registered trademarks of Apple
Computer, Inc., registered in the United States Patent and Trademark
Office. LocalTalk™, Balloon Help™, QuickDraw™, Power Mac™, and
SimpleText™ are trademarks of Apple Computer, Inc. AutoCAD®is a
registered trademark of Autodesk, Inc., registered in the United States
Patent and Trademark Office.
DEC®and Digital®are registered trademarks of Digital Equipment
Corporation, registered in the United States Patent and Trademark Office.
Imation™ is a trademark of Imation Corporation. Intel®and Pentium®are
registered trademarks of Intel Corporation registered in the United States
Patent and Trademark Office. Token Ring® is a registered trademark of
International Business Machines Corporation, registered in the United
States Patent and Trademark Office. ITC Avante Garde Gothic®, ITC
Bookman®, and ITC Zapf Chancery®are registered trademarks of
International Typeface Corporation, registered in the United States Patent
and Trademark Office and some foreign countries. ITC typefaces are
copyrighted © by the International Typeface Corporation.
Kodak®is a registered trademark of Eastman Kodak Company.
Lexmark®is a registered trademark of Lexmark International, Inc.
Helvetica®, New Century Schoolbook®, and Times®are registered
trademarks of Linotype AG and/or its subsidiaries, registered in the United
States Patent and Trademark Office.

_____________________________________________________ iii
FreeHand™ is a trademark of Macromedia, Inc. Microsoft®,MS-DOS®,
Windows®, and Windows NT®are registered trademarks of Microsoft
Corporation, registered in the United States Patent and Trademark Office.
MultiAd Creator®is a registered trademark of MultiAd Services, Inc.,
registered in the United States Patent and Trademark Office.
Novell®and NetWare®are registered trademarks of Novell, Inc., registered
in the United States Patent and Trademark Office.
Quark®and QuarkXPress®are registered trademarks of Quark, Inc.,
registered in the United States Patent and Trademark Office.
Preps®is a registered trademark of ScenicSoft, Inc., registered in the United
States Patent and Trademark Office. ScenicSoft is a trademark of
ScenicSoft, Inc. Solaris™ is a trademark of Sun Micro Systems, Inc.,
registered in the United States Patent and Trademark Office.
UL®is a registered trademark of Underwriters Laboratory, registered in the
United States Patent and Trademark Office. UNIX®is a registered
trademark of UNIX Systems Laboratories, Inc., registered in the United
States Patent and Trademark Office. ENERGY STAR® is a registered
trademark of the US EPA, registered in the United States Patent and
Trademark Office.
Ethernet® and Xerox®are registered trademarks of Xerox Corporation,
registered in the United States Patent and Trademark Office.
All other brand and product names are trademarks, registered
trademarks, or service marks of their respective holders.
Manual Notice
XANTÉ CORPORATION reserves the right to make changes to this
manual and to the equipment described herein without notice. Every
effort has been made to ensure that this manual is free of
inaccuracies and omissions. However, XANTÉ CORPORATION
makes no warranty of any kind including, but not limited to, any
implied warranties of merchantability and fitness for a particular
purpose with regard to this manual.

ivbb ____________________________________________________
XANTÉ CORPORATION assumes no responsibility for, or liability
for, errors contained in this manual or for incidental, special, or
consequential damages arising out of the furnishing of this manual,
or the use of this manual in operating the equipment, or in
connection with the performance of the equipment when so operated.
Proprietary
The digitally encoded software included with the XANTÉ Colour
ScreenWriter printer is copyrighted © 2001 by XANTÉ
CORPORATION. All Rights Reserved. Patent Pending. This
software may not be reproduced, modified, displayed, transferred, or
copied in any form or manner or on any media, without the express
written permission of XANTÉ CORPORATION.
Copyright
This manual is Copyrighted © 2001 by XANTÉ CORPORATION. All
Rights Reserved. Printed in the USA. This manual may not be copied in
whole or in part, nor transferred to any other media or language without the
express written permission of XANTÉ CORPORATION.
Safety Information
The printer generates a small amount of ozone gas during image transfer
in the printing process. When shipped from the factory, the printer
meets the Underwriter’s Laboratory (UL) standard for ozone emission.
Warning! An invisible laser beam which radiates inside the laser
printer’s scanner unit can cause permanent eye damage. DO
NOT disassemble or try to adjust the laser scanner unit.
FCC Classification
Warning! Changes or modifications to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if

_____________________________________________________ v
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Shielded cables must be used with this unit to ensure compliance with the
FCC Class A limits.
Power Information
100/120 V Version:100/120 VAC (90-132 V), 50/60 Hz (47-63 Hz), 6.5 A
220/240 V Version:220/240 VAC (198-264 V), 50/60 Hz (47-63 Hz), 3.2 A
Power Cord
The power cord is the main disconnect device. It should be plugged into an
easily accessible outlet.
For 115 Volt Configuration:
The power cord to be used with 115 Volt configuration is minimum type
SJT (SVT) 18/3, rated 250 Volts ac, 10 Amps with a maximum length of 15
feet. One terminated in an IEC 320 attachment plug. The other end is
terminated in a NEMA 5-15P plug.
For 230 Volt Configuration
The power cord to be used with 230 Volt configuration is minimum type
SJT (SVT) 18/3, rated 250 Volts ac, 10 Amps with a maximum length of 15
feet. One terminated in an IEC 320 attachment plug. The other end is
terminated as required by the country where it will be installed.
Le cable de transport d'energie que doit etre utilis'e la configuration 230
Volts est le type minimum SJT (SVT), 18/3, nominal 250 Volts ac, 10
Amps, 4.5 m long maximum. Un bout est raccorde comme exige par le pays
ou il sera utilis'e.
Das Netzkabel ist das haupfsachliche Diskonnektionsmittel, es sollte in eine
leicht erreichbare steckdos gesteckt werden.
Das Netzkabel kann mit einer 230 Volts Konfiguration verwonder werden
vom typ: Minimum VDE or HAR, 3 X 1.00 mm2, 250 V ac, 10 Amps,
maximal 4.5 m long. Ein Ende ontspriche dem Stecker IEC 320. Das andoro
Ende entspricht den Anfoderungen des entsprechenden Landes.

vibb ____________________________________________________
Power Conservation
As an ENERGY STAR®Partner, XANTÉ
CORPORATION has determined this product
meets the ENERGY STAR®guidelines for
energy efficiency. This printer enters a low-
power state after 30 minutes of inactivity. This
complies with the U.S. EPA ENERGY STAR
Program, but is not an EPA endorsement of the
product.
Manufacturer’s Declaration of Conformity
The Product XANTÉ Colour ScreenWriter has been designed and
manufactured in accordance with the following international standards:
EN 50081-1 “Generic Emissions Standard for Residential,
Commercial and Light Industrial Products of” 01,
Feb. 1991
EN 50082-1 “Generic Immunity Standard for Residential,
Commercial and Light Industrial Products of” 01,
Feb. 1991
EN 55022 “Limits and Methods of Measurement of Radio
Interference Information Technology Equipment of”
14, April 1987
IEC 1000-4-2 “Testing Measurement Techniques, Electrostatic
Discharge of” 1995, First Edition
IEC 1000-4-3 “Testing and Measurement Techniques, Radio
Frequency, Electromagnetic Field Immunity Test of”
1995 First Edition
IEC 1000-4-4 “Testing and Measurement Techniques, Electrical
Fast Transient/Burst Immunity Test of” 1995 First
edition
MIL-STD-45662A “Calibration System Requirements”
EN 60950 “Safety of Information Technology Equipment
including Electrical Business Equipment”
I, the undersigned, hereby declare that the equipment specified above
conforms to the above Directives and Standards
Place Mobile, Alabama
Date December 7, 1995 Robert C. Ross, Jr.
President

_____________________________________________________ vii
Colophon and Credits
This manual was written using Adobe PageMaker, Adobe Acrobat, Adobe
Photoshop, Adobe Illustrator, and FreeHand. Typefaces for the main body
of the manual are Times, Helvetica, and Courier.
Credits: edited by Lesa Moore; written by Lane Crume, Ashley
Lauber, and Stephanie Wright; designed by Gene Everette;
illustrated by Todd Till, Susie Simmons, and Paula Sirk; special
thanks to XANTÉ Engineering, XANTÉ Technical Support, and all
of our reviewers.
◊◊◊

viiibb ____________________________________________________

_____________________________________________________ ix
Table of Contents
Chapter 1 - Introduction .............................................................. 1-1
XANTÉ Colour ScreenWriter Printer ...................................... 1-3
About This Manual .................................................................. 1-4
Manual Conventions.......................................................... 1-5
Printer Features ........................................................................ 1-6
Printer Configurations .............................................................. 1-8
Warranty and Product Registration .......................................... 1-9
Other Helpful Documentation................................................ 1-10
Chapter 2 - Installation ................................................................ 2-1
Introduction .............................................................................. 2-3
Printer Location ....................................................................... 2-3
Printer Package ........................................................................ 2-4
Printer Overview ...................................................................... 2-6
Toner Cartridges ...................................................................... 2-8
Handling Toner Cartridges ................................................ 2-8
Redistributing Toner ................................................... 2-9
Removing and Installing a Toner Cartridge ...................... 2-9
Removing or Installing an OPC Belt Cartridge ..................... 2-11
Installing or Replacing the Fuser Oil Bottle .......................... 2-14
Installing or Replacing the Cleaning Roller........................... 2-16
Paper Cassette ........................................................................ 2-17
Printer Ports ........................................................................... 2-20
Selecting the Printer Interface ......................................... 2-21
Connecting to the LocalTalk Port ................................... 2-21
Connecting to the Parallel Port ........................................ 2-23
Connecting to the Serial Port........................................... 2-24
Connecting to the Ethernet Ports ..................................... 2-24
Unshielded Twisted Pair (10BaseT and 10/100BaseT) 2-24
Connecting the Power Cord and Verifying Setup.................. 2-26
Connecting the Power Cord ............................................ 2-26
Turning the Printer On .............................................. 2-27
Turning the Printer Off ............................................. 2-27
Verifying Setup ............................................................... 2-28

xbb ____________________________________________________
Verifying a LocalTalk Setup..................................... 2-28
Verifying a Parallel Setup ......................................... 2-28
Verifying the Serial Setup......................................... 2-29
Colour Density Calibration .................................................... 2-29
Chapter 3 - Macintosh Setup ....................................................... 3-1
Introduction .............................................................................. 3-3
XANTÉ Utilities CD-ROM ..................................................... 3-3
Adobe Acrobat Reader ............................................................. 3-5
XInstaller.................................................................................. 3-5
Adobe PostScript Printer Drivers............................................. 3-8
Selecting the Adobe PostScript Printer Driver .................. 3-8
AdobePS 8.7.X ........................................................... 3-9
AdobePS 8.6 ............................................................. 3-10
AdobePS 8.5.1 .......................................................... 3-10
AdobePS 8.7.X ................................................................ 3-11
Installing AdobePS 8.7.X ......................................... 3-11
Installing the PPD for AdobePS 8.7.X ..................... 3-12
AdobePS 8.6 .................................................................... 3-12
Installing AdobePS 8.6 ............................................. 3-13
Installing the PPD for AdobePS 8.6 ......................... 3-13
AdobePS 8.5.1 ................................................................. 3-14
Installing AdobePS 8.5.1 .......................................... 3-14
Installing the PPD for AdobePS 8.5.1 ...................... 3-14
Configuring the PPD ....................................................... 3-15
Configuring the Printer .................................................... 3-17
App Drivers Folder ................................................................ 3-18
PageMaker 5 PPD Folder ................................................ 3-18
QuarkXPress PDF Folder ................................................ 3-18
ScenicSoft Preps .............................................................. 3-19
Downloads Folder .................................................................. 3-20
XANTÉ Command Center ..................................................... 3-21
General Menu .................................................................. 3-21
Printer Status ............................................................. 3-22
Printer Information ................................................... 3-22
Spooling .................................................................... 3-22
Margin Adjustment ................................................... 3-22
X-ACT ...................................................................... 3-23
Download Postscript File .......................................... 3-23

_____________________________________________________ xi
Test Directory ........................................................... 3-23
Reboot Printer ........................................................... 3-23
Startup Page .............................................................. 3-23
Configure .................................................................. 3-23
Networking Menu............................................................ 3-24
Novell Print Server ................................................... 3-24
AppleTalk ................................................................. 3-25
TCP/IP ...................................................................... 3-25
Graphics Menu ................................................................ 3-25
CRD Directories ....................................................... 3-25
Linearization ............................................................. 3-26
Enhanced Screen Calibration .................................... 3-26
ICC Profiling............................................................. 3-26
Adobe Downloader ................................................................ 3-26
File Menu ........................................................................ 3-27
Download Fonts ........................................................ 3-27
Download Postscript File .......................................... 3-27
Special Menu ................................................................... 3-27
Printer Status ............................................................. 3-27
Printer Font Directory ............................................... 3-27
Other Special Menu Options..................................... 3-28
Procedures .............................................................................. 3-28
Color Linearization (Calibration) .................................... 3-28
Advanced Linearization ............................................ 3-32
EEROM Configuration.................................................... 3-32
Enhanced Screen Calibration .......................................... 3-34
Profiling ........................................................................... 3-36
Printer Margin Adjustment .............................................. 3-40
Downloaded Fonts ........................................................... 3-42
Downloading Fonts ................................................... 3-42
Reviewing and Removing Downloaded Fonts ......... 3-43
Chapter 4 - PC Setup ................................................................... 4-1
Introduction .............................................................................. 4-3
XANTÉ Utilities CD-ROM (PC)............................................. 4-3
Adobe Acrobat Reader ............................................................. 4-4
XANTÉ Utilities Installer ........................................................ 4-5
XANTÉ Utilities and Application Drivers ........................ 4-6
Adobe PostScript Printer Drivers............................................. 4-9
Deleting Previous Driver Versions.................................... 4-9

xiibb ____________________________________________________
Deleting AdobePS 4.1.X and Later............................. 4-9
Deleting AdobePS 4.0 and Earlier ............................ 4-11
Windows 95, 98, Me, 2000, and NT 4.0 Drivers ............ 4-12
Installing the AdobePS Printer Driver and Printer PPD 4-12
Installing AdobePS 4.4 and the Printer PPD ............ 4-13
Configuring the PPD for Windows 95, 98, Me, 2000, or NT
4.X ............................................................................. 4-20
Configuring the Printer .................................................... 4-24
PDFs Folder ........................................................................... 4-25
PS_Files Folder ...................................................................... 4-26
XANTÉ Command Center ..................................................... 4-27
Launching Command Center........................................... 4-28
Shortcut Icons .................................................................. 4-29
Options Menu .................................................................. 4-31
Controller Menu .............................................................. 4-31
General ...................................................................... 4-32
Align Paper ............................................................... 4-34
CRD Directory .......................................................... 4-34
Configure .................................................................. 4-34
Linearize ................................................................... 4-34
Enhanced Screen Calibration .................................... 4-34
ICC Profiling ............................................................. 4-34
Spooler ...................................................................... 4-34
Novell........................................................................ 4-35
Test Directory ........................................................... 4-36
More X-ACT ............................................................. 4-36
Ports Menu ...................................................................... 4-36
Procedures .............................................................................. 4-36
Color Linearization (Calibration) .................................... 4-36
Advanced Linearization ............................................ 4-40
EEROM Configuration.................................................... 4-41
Enhanced Screen Calibration .......................................... 4-42
Profiling ........................................................................... 4-44
Printer Margin Adjustment .............................................. 4-47
Managing Fonts on an Optional Hard Disk..................... 4-49
Chapter 5 - Ethernet Setup.......................................................... 5-1
Introduction .............................................................................. 5-3
EtherTalk Network Configuration ........................................... 5-3
Select the EtherTalk Phase 2 Driver.................................. 5-3

_____________________________________________________ xiii
Change the EtherTalk Zone Name .................................... 5-4
Using XANTÉ Command Center ............................... 5-4
Novell NetWare Configuration ................................................ 5-5
Configure the Novell Server.............................................. 5-5
Selecting the Novell Names ........................................ 5-6
Configure the Novell Server (NetWare 3.X and 4.X) 5-7
Configure the Novell Server (NetWare 5.X) .............. 5-9
Configure the Print Server Emulation ............................. 5-15
Using XANTÉ Command Center (PC) .................... 5-15
Using XANTÉ Command Center (Macintosh)......... 5-17
Configure the Novell Print Server Interface.................... 5-20
Using XANTÉ Command Center (PC) .................... 5-20
Using XANTÉ Command Center (Macintosh)......... 5-20
Install the Adobe PostScript Driver................................. 5-21
Line Printer Configuration ..................................................... 5-22
Configure the Line Printer Interface................................ 5-22
TCP/IP Addresses............................................................ 5-22
Reserved IP Addresses.............................................. 5-24
Network Masks ......................................................... 5-24
Broadcast Addresses ................................................. 5-25
Subnet Addresses ...................................................... 5-25
Set the TCP/IP Address ................................................... 5-25
Using XANTÉ Command Center (PC) .................... 5-26
Using XANTÉ Command Center (Macintosh)......... 5-27
Configure the Printer Setup on the Network ................... 5-28
Windows NT 4.X Configuration............................................ 5-29
LPR Port Setup for TCP/IP ............................................. 5-29
AppleTalk Setup for EtherTalk ....................................... 5-30
Chapter 6 - Configuration ........................................................... 6-1
Introduction .............................................................................. 6-3
Front Panel ............................................................................... 6-3
Window ............................................................................. 6-3
Status Lights ...................................................................... 6-4
Control Keys...................................................................... 6-4
Configuration Menus ............................................................... 6-5
Selecting Menu Options .................................................... 6-5
Resetting to Factory Defaults ............................................ 6-6
Level 1 Reset .............................................................. 6-6
Level 2 Reset .............................................................. 6-6

xivbb ____________________________________________________
Menu Structure .................................................................. 6-7
The PPD ................................................................................... 6-8
Selecting PPD Options (Macintosh).................................. 6-8
Selecting PPD Options (Windows 95, 98, and Me) ........ 6-10
Selecting PPD Options (Windows 2000) ........................ 6-11
Selecting PPD Options (Windows NT 4.0) ..................... 6-13
PPD Menus ...................................................................... 6-14
Configuring Printer Features.................................................. 6-15
AccelaFont....................................................................... 6-15
Accurate Calibration Technology (X-ACT).................... 6-15
Front Panel X-ACT ................................................... 6-16
Colour Density Calibration and Verification .................. 6-17
Target Calibrate ........................................................ 6-18
Target Verify ............................................................. 6-20
Colour Mode.................................................................... 6-21
Colour Model .................................................................. 6-21
Colour Output .................................................................. 6-22
XANTÉ TrueColour ................................................. 6-22
Direct ........................................................................ 6-22
Press Profiling ........................................................... 6-22
Color Profile .................................................................... 6-22
Source ....................................................................... 6-23
Destination ................................................................ 6-23
Intent ......................................................................... 6-23
Colour Separations .......................................................... 6-23
Configure (EEROM Settings) ......................................... 6-23
Interface Control .............................................................. 6-24
Enable Menus ........................................................... 6-25
RS232 Configuration ................................................ 6-25
DHCP Configuration ................................................ 6-25
Parallel Configuration ............................................... 6-26
Novell Print Server Configuration ............................ 6-26
IP Address Configuration ......................................... 6-26
Job Timeout ..................................................................... 6-27
Language ......................................................................... 6-27
Laser Power ..................................................................... 6-28
Lines Per Inch (LPI) ........................................................ 6-28
Maintenance (Clearing Messages) .................................. 6-28
Media Options ................................................................. 6-29
Mirror Print...................................................................... 6-29

_____________________________________________________ xv
Power Save ...................................................................... 6-30
RAM Disk ....................................................................... 6-30
Registration ..................................................................... 6-30
Resolution Options (DPI) ................................................ 6-30
Screen Shape ................................................................... 6-31
Spot Function (Screen Type) ........................................... 6-31
Start-up Page ................................................................... 6-32
Tray Selection Options .................................................... 6-32
Selecting a Specific Tray .......................................... 6-32
Enabling Tray Chaining ............................................ 6-34
UCR (Under Color Removal).......................................... 6-35
Utility Pages .................................................................... 6-35
Advanced Calibration ............................................... 6-35
Font Names ............................................................... 6-35
Font Sample .............................................................. 6-36
Target Calibrate ........................................................ 6-36
Target Verify............................................................. 6-36
TrueColour Calibrate ................................................ 6-36
TrueColour Verify .................................................... 6-36
Registration ............................................................... 6-37
Verify Registration ................................................... 6-37
XANTÉ Screen Weight ............................................ 6-37
Chapter 7 - Media: Handling and Printing................................ 7-1
Introduction .............................................................................. 7-3
Media Specifications ................................................................ 7-3
Guidelines for Selecting and Storing Media ..................... 7-3
XANTÉ Myriad 2 Media ............................................ 7-3
Selecting Media .......................................................... 7-4
Storing Media ............................................................. 7-5
Media Sizes ....................................................................... 7-5
Imageable Area ........................................................... 7-5
Media Types ...................................................................... 7-7
Media Handling ....................................................................... 7-7
Media Path ......................................................................... 7-8
Media Sources ................................................................... 7-8
Optional Paper Feeders ............................................... 7-9
Paper Cassettes ........................................................... 7-9
Loading Media ............................................................ 7-9
Tray Chaining ........................................................... 7-10

xvibb ____________________________________________________
Duplex Printing ...................................................................... 7-11
Manual Duplexing ........................................................... 7-11
Optional Duplexer ........................................................... 7-12
Guidelines for Using the Duplexer ........................... 7-12
Coated Stock Printing ............................................................ 7-12
Coverstock Printing ............................................................... 7-13
Film Printing .......................................................................... 7-14
Envelope Printing................................................................... 7-16
Installing and Removing the Envelope Adapter.............. 7-16
Installing the Envelope Adapter................................ 7-16
Removing the Envelope Adapter .............................. 7-17
Guidelines for Printing Envelopes .................................. 7-18
Label Printing ......................................................................... 7-19
Transfer Media Printing ......................................................... 7-20
Transparency Printing ............................................................ 7-20
Chapter 8 - Color Printing........................................................... 8-1
Introduction .............................................................................. 8-3
Color Printing Technology ...................................................... 8-3
Color Printing Concepts and Variables.................................... 8-5
Color Theory ..................................................................... 8-5
Additive Theory .......................................................... 8-5
Subtractive Theory ...................................................... 8-6
Ink Density Variables ........................................................ 8-6
CRD ............................................................................ 8-6
Transfer Curves........................................................... 8-6
Application Variables ........................................................ 8-7
Media Variables ................................................................ 8-7
Setting Variables ............................................................... 8-8
Color Gamut Variables ...................................................... 8-9
Human Variables ............................................................. 8-10
Color Management................................................................. 8-10
Destination....................................................................... 8-11
ICC Profiles ..................................................................... 8-11
CRDs ............................................................................... 8-12
Intent ................................................................................ 8-12
Source .............................................................................. 8-13
Color Printing Procedures ...................................................... 8-13
Color Density Calibration and Verification .................... 8-14

_____________________________________________________ xvii
Target Calibrate ........................................................ 8-14
Target Verify............................................................. 8-16
Color Registration ........................................................... 8-17
TrueColour Calibration (Linearization) .......................... 8-19
Chapter 9 - Maintenance and Specifications ............................. 9-1
Introduction .............................................................................. 9-3
Maintenance ............................................................................. 9-3
Handling the Printer .......................................................... 9-3
Storing the Printer ............................................................. 9-4
Moving the Printer............................................................. 9-5
Repacking the Printer ............................................................... 9-6
Before You Begin .............................................................. 9-7
Removing Cables and Cassette(s) ..................................... 9-7
Removing Toner Cartridges .............................................. 9-8
Plug the Auger Opening .................................................... 9-8
Prepare the Toner Auger Area......................................... 9-10
Remove the Oil Bottle and Cleaning Roller .................... 9-12
Changing the Toner Waste Pack ..................................... 9-14
Removing a Duplexer ...................................................... 9-15
Removing an LFU (Lower Feeder Unit) ......................... 9-17
Packing the Printer .......................................................... 9-20
Replacing Consumables ......................................................... 9-21
Replacing the Drum Cleaner ........................................... 9-22
Replacing the Ozone Filter .............................................. 9-23
Replacing the Fuser Unit ................................................. 9-24
Replacing the Toner Waste Pack..................................... 9-25
Replacing the Transfer Roller ......................................... 9-26
Cleaning the Printer ............................................................... 9-27
Transfer Unit Cleaning .................................................... 9-28
Registration and Transfer Roller Cleaning ............... 9-28
OPC Belt Cartridge Cleaning .......................................... 9-30
Optical Unit Lens Cleaning ............................................. 9-32
Interior Cleaning .............................................................. 9-34
Exterior Cleaning ............................................................ 9-36
Technical Specifications ........................................................ 9-37
Printer Memory Requirements ........................................ 9-40
Warranty and Service Options ............................................... 9-41
Limited Warranty ................................................................... 9-42

xviiibb ____________________________________________________
Effect of Consumables on Warranty ...................................... 9-43
Chapter 10 - Options .................................................................. 10-1
Introduction ............................................................................ 10-3
Printer Options ....................................................................... 10-3
Paper Handling Options ......................................................... 10-3
Lower Feeder Unit (LFU) ............................................... 10-4
Installing the LFU ..................................................... 10-4
Removing the LFU ................................................. 10-12
Duplexer ........................................................................ 10-13
Installing the Duplexer............................................ 10-13
Removing the Duplexer .......................................... 10-17
Controller Board Upgrades .................................................. 10-18
Removing the Controller Board .................................... 10-18
Installing SODIMM and Firmware Upgrades ............... 10-20
RAM Upgrades (SODIMMs) ................................. 10-20
Common Specifications for all Densities ............... 10-21
Supported Densities and Organizations .................. 10-21
Resolution Firmware Upgrade ................................ 10-22
Installing SODIMMs or SIMMs ............................. 10-22
10/100BaseT Upgrade ................................................... 10-25
Internal IDE Hard Drive Upgrade ................................. 10-28
Replacing the Controller Board Panel ........................... 10-28
Chapter 11- Troubleshooting .................................................... 11-1
Introduction ............................................................................ 11-3
Status Messages ..................................................................... 11-3
Power and Setup Issues........................................................ 11-13
Color Issues .......................................................................... 11-17
Print Quality Issues .............................................................. 11-19
Mechanical Issues ................................................................ 11-30
Media Jams .......................................................................... 11-31
Preventing Jams ............................................................. 11-31
Locating Jams ................................................................ 11-32
Clearing Jams ................................................................ 11-34
Clearing an Output Area Jam.................................. 11-34
Clearing a Paper Cassette Area Jam ....................... 11-35
Clearing a Back Cover Area Jam ............................ 11-36

_____________________________________________________ xix
◊◊◊
Clearing a Paper Exit Fuser Area Jam .................... 11-37
Clearing a Duplexer Top Cover Area Jam.............. 11-38
Clearing a Duplexer Lower Cover Area Jam.......... 11-40
Technical Support ................................................................ 11-42
Appendix —Application Notes and Page Design..................... A-1
Introduction ............................................................................. A-3
Application Notes ................................................................... A-3
Screen Frequency and Angle ............................................ A-3
QuarkXPress ........................................................................... A-4
QuarkXPress (PC) ............................................................ A-4
QuarkXPress 3.X Page Setup (PC) ............................ A-4
QuarkXPress 4.X Page Setup (PC) ............................ A-5
QuarkXPress (Macintosh) ................................................ A-5
QuarkXPress 3.X Page Setup (Macintosh) ................ A-5
QuarkXPress 4.X Page Setup (Macintosh) ................ A-6
PageMaker .............................................................................. A-7
PageMaker Setup (PC) ..................................................... A-7
PageMaker Setup (Macintosh) ......................................... A-7
Using PageMaker 6.0 and 6.5 .......................................... A-9
AutoCAD 12 for PostScript .................................................. A-10
Configuring AutoCAD 12 .............................................. A-10
Printing from AutoCAD 12 ............................................ A-11
MultiAd Creator .................................................................... A-13
Page Design .......................................................................... A-13
Typefaces and Fonts ....................................................... A-13
Italic, Oblique, Bold, Demi, Medium and Light FormsA-15
Other Elements of Design ..................................................... A-16
Orientation ...................................................................... A-16
Pitch ................................................................................ A-17
Point Size and x-Height .................................................. A-17
Spacing ........................................................................... A-18
Page Design Tips ............................................................ A-19
Glossary ........................................................................................ G-1
Index ..................................................................................................... I-1

xxbb ____________________________________________________