Xerox Legacy 4112 User manual

CustomXerox DocuColor
Accessing Extended Features
Xerox 4127/4110
PDL Reference Guide for the
Xerox 4127/4112
October 16, 2007
Overview
This document enables you to access the extended features of the Xerox 4127/4112
and in environments that do not have a custom driver.
NOTE: Some of the commands and syntax used in this documents requires some
familiarity with either PostScript (PS) or Printer Command Language (PCL).
This document provides the Printer Description Language (PDL) commands and
syntax for each feature. The following items are also included:
・ A PostScript tables that describes the PostScript features the Xerox 4127/4110
supports and the syntax to use the feature.
・ A PCL tables that describes the PCL features the Xerox 4127/4110 supports and
the syntax to use the feature.
This document is not intended to be a complete PS or PCL reference manual:
It is a guide for using the PS and PCL commands with Xerox 4127/4110.
Refer to these additional reference materials PostScript Language Reference Manual,
Third Edition, ISBN 0-201-38922-8, PCL5 Printer Language Technical Reference
Manual, Hewlett-Packard Manual and Printer Job Language Technical Reference
Manual, Hewlett-Packard Manual.
Using this Guide
1. Search the Feature Table to determine whether the feature you wish to use is
supported.
2. Verify that the feature is supported by the platform. For example, the Xerox
4127/4110 must have the Finisher option installed to use stapling commands.
3. Following across the table to find the syntax listed for the PDL examples shown.
Read the Dependencies/Caveats section.
Page 1 Xerox 4127/4112 PDL Reference Guide

PostScript
This Xerox 4127/4110 supports PS3 commands that enable the features listed in the
following table.
Feature Description
Media Size This command specifies the size of media on which to
print the job.
Media Direction This command specifies the edge of the input medium
that will enter the printing engine or imager first and
across which data will be imaged. Values reflect
positions relative to a canonical page in portrait
orientation (width smaller than height):
Media Source This command specifies the tray to supply the job’s
media.
Media Source from
Bypass tray This command indicates whether the input medium is to
be fed from bypass tray.
Media Color Use this command to indicate the color of the media
used to print a job.
Media Weight Media weight. Unit: (g/㎡) gram per square-meter
Media Class Paper class (ex. normal, thick, recycled)
Media Type Media types are used to distinguish the type of media a
job requires.
Media Selection Specify if you apply the strict setpagedevice rule to
media selection.
Resolution This command sets the resolution value.
Duplex Delivers two-sided output. Landscape documents read
like a calendar, and Portrait documents read like a book.
Tumble Deliver two-sided output. (Use combine with Duplex)
Landscape documents read like a book and Portrait
documents read like a calendar.
Image Enhancement Specify whether you apply edge-smoothing to output
after rendering
Toner Save Use this command to control toner consumption when
printing.
Halftone Screen
Selection This command specifies the screen type.
Output Location Indicates the output bin where the print job is sent.
Copies The number of copies to produce, either of each page
individually or of the document as a whole, depending
on the value of the Collate parameter.
Collation A flag specifying how the output is to be organized when
multiple copies are requested for a multiple-page
Page 2 Xerox 4127/4112 PDL Reference Guide

Page 3 Xerox 4127/4112 PDL Reference Guide
Feature Description
document. Output consists of page sets that are
delivered together. If Collate is true, a page set consists
of one copy of all pages of the document; if it is false, a
page set consists of all copies of one page of the
document.
Offset This feature provides a physical offset of hard copy that
distinguishes between sets or stacks within a job.
Stapling This command indicates use and location of staple(s).
Punch This command indicates hole punches for a print job on
a device with hole punch capability.
Booklet This command enables you to print documents as small
booklets. If available on your printer, you can also have
your job folded or stapled.
Interleaving Paper
(Transparency
Separator)
Insert blank sheet between OHP sheets.
Process Color Model Select process color model (DeviceGray, DeviceRGB,
DeviceCMYK,,,)
Separations Specify whether multiple color separations are
generated for each page of output.
Separation Color
Names Specify the process colorant name.
Separation Order Specify the order of process colorant name.
Use CIE Color Specify if you apply CIE-based color space through
color conversion
Job Name
Job Type
(Secure Print / Proof
Print)
Job Based
Accounting
Auditron
Delay Print
Banner Sheet
These features are same as ‘PCL/PJL Implementation’.
Please refer the section to leverage the features.

PostScript Implementation
This section describes the PostScript commands required to access specific Xerox
4127/4110 features. This table lists each feature and the PostScript syntax that is
required to use the feature. Following this table are some examples of how to use
these commands and what the PostScript file looks like.
For more information about PostScript commands, refer to the PostScript Language
Reference Manual, Third Edition, and ISBN 0-201-37992-8.
PostScript Print Features/Implementation
* = default value
Feature Implementation Values
Media Size <</PageSize [width height]>>
setpagedevice
[width x height] in 1/72 inch(points)
[842 1191] = A3 (297 x 420mm) †
[595 842] = A4 (210 x 297mm)
[420 595] = A5 (148 x 210mm) †
[729 1032] = B4 (257 x 364mm)
[516 729] = B5 (182 x 257mm)
[792 1224] = Tabloid (11 x 17")
[612 1008] = Legal (8.5 x 14")
[612 936] = 8.5 x 13"
[612 792] = Letter (8.5 x 11")
[522 756] = Executive (7.25 x 10.5")
[396 612] = Statement (5.5 x 8.5") †
[576 720] = 8 x 10"
[641 879] = 226 x 310mm †
[879 1225] = 310 x 432mm
[864 1296] = Oversized Tabloid (12 x
18") †
[907 1274] = SRA3 (320 x 450mm) †
[907 1383] = 12.6 x 19.2" †
[936 1296] = 13 x 18" †
[936 1368] = 13 x 19" †
[553 765] = 16K (195 x 270mm) †
[550 757] = 16K (194 x 267mm) †
[765 1106] = 8K (270 x 390mm) †
[757 1100] = 8K (267 x 388mm) †
†: Whether each paper is available
depends on NV memory setting.
The following paper sizes are only
available with Bypass tray.
[297 420] = A6 (105 x 148mm)
[363 516] = B6 (128 x 182mm)
[792 1080] = 11 x 15"
[288 432] = Postcard (4 x 6")
[360 504] = 5 x 7"
[609 892] = 215 x 315mm
[632 842] = A4 Cover (223 x 297mm)
[648 792] = 9 x 11"
[283 420] = Postcard (100 x 148mm)
[420 567] = Postcard (148 x 200mm)
Page 4 Xerox 4127/4112 PDL Reference Guide

Page 5 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
Media
Direction <</LeadingEdge int >> setpagedevice Where int is one of the following:
0 = Short Edge; top of canonical page
1 = Long Edge; right side of canonical
page
2 = Short Edge; bottom of canonical page
3 = Long Edge; left side of canonical
page
null* = Auto
Media Source <</MediaPosition int>>
setpagedevice Where int is one of the following:
0 = Tray1
1 = Tray2
2 = Tray3
3 = Tray4
4 = Tray6
5 = Tray7
null* = Auto(The values with the asterisk
is the default value)
Media Source
from Bypass
tray
<</ManualFeed value>>
setpagedevice Where value is one of the following: true = Feed paper from Bypass tray
false* = Feed paper from a tray other
than Bypass tray
Media Color <</MediaColor (string) >>
setpagedevice Where string is one of the following or null*:
white
blue
yellow
green
pink
ivory
gray
buff
goldenrod
red
orange
custom1 = Custom Color 1
custom2 = Custom Color 2
custom3 = Custom Color 3
custom4 = Custom Color 4
custom5 = Custom Color 5
transparent = Clear
other
Media Weight <</MediaWeight real >>
setpagedevice
Where real is in g/ ㎡(gram per
square-meter) or null*
(MediaWeight will not affect any tray
selection.)
Media Class <</MediaClass (string)>>
setpagedevice Where string is one of the following or null*: stationary = Plain
stationary[S1] = Plain S1

Page 6 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
stationary side2 = Plain Reload
used[S1] = Plain S1 Reload
recycled = Recycled
recycled[S1] = Recycled S1
thin = Lightweight (52 - 63g/m2)
thick1 = Heavyweight (HW) (106 -
216g/m2)
thick1[S1] = Heavyweight (HW) S1 (106 -
216g/m2)
thick2 = Extra HW (X-EW) (217 -
253g/m2)
thick2[S1] = Extra HW (X-EW) S1 (217 -
253g/m2)
transparency = Transparency
holed = Punched
label1 = Labels (106 - 216g/m2)
label2 = HW Labels (217 - 253g/m2)
tabbed thick1 = Tab Stock (106 -
216g/m2)
tabbed thick2 = HW Tab Stock (217 -
253g/m2)
coating1 = Gloss (64 - 105g/m2)
coating1[A] = Gloss A (106 - 135g/m2)
coating1[B] = Gloss B (136 - 216g/m2)
coating2 = HW Gloss (217 - 253g/m2)
user1 = Custom 1
user2 = Custom 2
user3 = Custom 3
user4 = Custom 4
user5 = Custom 5
Media Type <</MediaType (string)>>
setpagedevice Where string is any value or null*. (MediaType will not affect any tray
selection.)
Media
Selection <</DeferredMediaSelection value>>
setpagedevice
Where value is one of the following:
true* = Deferred media selection by
output device (more powerful and flexible
media selection)
false = Immediate media selection by
strict setpagedevice operator
To select the appropriate media when
using MediaClass / Staple / Punch feature,
value must be set to true intentionally in the
beginning of header.
Print Mode <</HWResolution [x y]>> Where x and y are one of the following:

Page 7 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
setpagedevice [600 600]*(dpi)
[1200 1200]
Duplex <</Duplex value>>
setpagedevice
Where value is one of the following:
true = Duplex
false* = Simplex
Tumble <</Tumble value>>
setpagedevice This feature is effective only in conjunction
with that Duplex is true
Where value is one of the following:
true = Tumble (Short edge binding
Duplex)
false* = Duplex (Long edge binding
Duplex)
Image
Enhancement <</PostRenderingEnhance true /PostRenderingEnhanceDetails
<< /Type 32 /REValue int >>
>>
setpagedevice
Where int is one of the following:
0 = No image enhancement
1* = Activate image enhancement
Toner Save <</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /TonerSaver int >>
>>
setpagedevice
Where int is one of the following:
0* = No toner saving
1 = Lighten output density, toner saving
Halftone
Screen
Selection
<</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /EngineScreen int >>
>>
setpagedevice
Where int is one of the following:
0 = Low frequency screen
1* = High frequency screen
2 = Compatible screen with FX standard
PDL’s(Low frequency)
3 = Compatible screen with FX standard
PDL’s(High frequency)
Output
Location <</OutputType (string)>>
setpagedevice Where string is one of the following or null*:
FINISHER TOP TRAY = finisher top tray
(w/ D-Finisher)
FINISHER TRAY = finisher tray (w/
D-Finisher)
FOLDER TRAY = folder tray (w/
D-Finisher and folder module)
BOOKLET TRAY = booklet tray (w/
D-Finisher and booklet module)
HCS1 TOP TRAY = hcs top tray (w/
HCS)
HCS1 TRAY = hcs tray (w/ HCS)
BOOKLET TRAY = booklet tray (w/
C-Finisher and booklet module)
null* = Not specified

Page 8 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
Quantity <</NumCopies value >>
setpagedevice
Where value is one of the following:
integer from 1 to 9999 : number of copies
null*: Not specified
Collation <</Collate value >>
setpagedevice Where value is one of the following: true = collated
false* = uncollated
Offset <</Jog int >>setpagedevice Where int is one of the following:
0* = Do not offset
3 = Offset at the beginning of each page
[set]
Stapling
(w/
D-Finisher)
<</Staple int1
/StapleDetails << /Type 7
/Location int2 >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not staple
3 = Staple at the end of each set
Where int2 is one of the following:
0* = top-left-single
1 = bottom-left-single
2 = top-right-single
3 = bottom-right-single
4 = top-double
5 = bottom-double
6 = left-double
7 = right-double
Punch
(w/
D-Finisher)
<</Punch int1
/PunchDetails << /Type 5
/Position int2
/Numholes int3 >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not punch
3 = Do punch by set unit.
Where int2 is one of the following:
0 = topside
1 = bottom side
2 = left side
3 = right side
Where int3 is one of the following:
2 = 2 holes
3 = 3 holes
4 = 4 holes
Fold
(w/ D-Finisher
and folding
module)
<</Fold int1
/FoldDetails << /Type 6
/FoldType int2
/ImageRotation int3
/PrintInside value4 >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not fold.
4 = Fold every page..
Where int2 is one of the following:
0* = Z Fold Half Sheets.
1 = Z Tri-Fold Single Sheets.
2 = C Tri-Fold Single Sheets.
Where int3 is one of the following:
0* = Do not rotate image.
1 = Roate image 180 degrees.
This feature is effective only in

Page 9 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
conjunction with that FoldType is 0.
Where value4 is one of the following:
true* = Print on inside.
false = Print on outside.
This feature is effective only in
conjunction with that FoldType is 1 or 2.
Booklet
(w/ D-Finisher
and booklet
module)
<</Booklet value1
/BookletDetails << /Type 3
/StapleType int
/PrintInside value2
/PageSet value3>>
>>
setpagedevice
Where value1 is one of the following:
true = Do Booklet.
false* = Do not Booklet.
Where int is one of the following:
0* = Do not file on inside.
1 = File on inside.
Where value2 is one of the following:
true* = Print on inside.
false = Print on outside.
This feature is effective only in conjunction
with that StapleType is 0.
Where value3 is one of the following:
true = Integrate several page and folds.
false = Fold every page.
This feature is effective only in conjunction
with that StapleType is 0.
Interleaving
Paper
(Transparency
Separator)
<</SlipSheet int1
/SlipSheetDetails << /Type 1
/AutoTraySelect int2
/SheetTray int3
/MediaClass (string) >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not deliver interleaving paper.
4 = Deliver interleaving paper at the end
of each page
Where int2 is one of the following:
0 = SheetTray is referred and feed
interleaving paper from the SheetTray
1* = Feed interleaving paper from a tray
following system setting. SheetTray is not
referred.
Where int3 is one of the following:
0* = Feed interleaving paper from Tray1
1 = Tray2
2 = Tray3
3 = Tray4
4 = Tray6
5 = Tray7
100 = Bypass tray
Where string is same as the “Media Class”
feature. It means media class for the
interleaving paper.

Page 10 Xerox 4127/4112 PDL Reference Guide
Feature Implementation Values
Process Color
Model <</ProcessColorModel name >>
setpagedevice
Where name is one of the following:
/DeviceGray
/DeviceRGB (with Separations true)
/DeviceCMYK (with Separations true)
/DeviceCMY (with Separations true)
/DeviceRGBK (with Separations true)
Separations <</Separations value >>
setpagedevice Where value is one of the following:
true = Multiple color separations will be
generated for each page of output.
false* = All colorants will be combined into a
single composite page on a single sheet of
physical medium.
Separation
Color Names <</SeparationColorNames value>>
setpagedevice
Where value is an array.
Legal element values are the process
colorant names implied by the process
color model.
Valid colorant names for each process
color model are like the following in case of
separation
DeviceCMYK = Cyan, Magenta, Yellow,
Black
DeviceCMY = Cyan, Magenta, Yellow
DeviceRGB = Red, Green, Blue
DeviceRGBK = Red, Green, Blue, Gray
DeviceGray = Gray
Separation
Order <</SeparationOrder value>>
setpagedevice
Where value is an array.
Legal element values are the process
colorant names implied by the process color
model.
Use CIE Color <</UseCIEColor value>>
setpagedevice
Where value is one of the following:
true = Re-map each color from device
color space to device independent’s CIE-
based color space
false* = Do not re-map color