Xerox Nuvera 120 EA Specification sheet

X
Xe er ro ox x N Nu uv ve er ra a
™
™
1 10 00 0/ /1 12 20 0
D
Di ig gi it ta al l C Co op pi ie er r/ /P Pr ri in nt te er r
S
SY YS ST TE EM M R RE EL LE EA AS SE E 6 6. .0 0 ( (W WI IT TH H F FR RE EE EF FL LO OW W
™
™ D DO OC CU US SP P
®
® 5 5. .0 0) )
C
Cu us st to om me er r E Ex xp pe ec ct ta at ti io on ns s D Do oc cu um me en nt t
Versi n: f
April 12, 2006
Includes:
• Xerox Nuvera™ 100/120 Digital Copier/Printer
• Optional Professional Multifunction Finisher MFF)
• Optional Insertion Module
• Optional 2
nd
Sheet Feed Module
• Optional Foreign Device Interface

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 2 -
Copyright 2004, 2005, 2006 Xerox Corporation
Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation,
material generated from the software programs that are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.
XEROX®, The Document Company®, Nuvera™, DocuSP®, FreeFlow™, the digitized X, and all Xerox product names and product numbers mentioned in this publication are trademarks of
XEROX CORPORATION. All non-Xerox brands and product names may be trademarks or registered trademarks of the respective companies, and are hereby acknowledged.
Product appearance, build status and/or specifications are subject to change without notice.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 3 -
Table f C ntents
I
I
IN
N
NT
T
TR
R
RO
O
OD
D
DU
U
UC
C
CT
T
TI
I
IO
O
ON
N
N.................................................................................................................4
P
P
PR
R
RO
O
OD
D
DU
U
UC
C
CT
T
T O
O
OV
V
VE
E
ER
R
RV
V
VI
I
IE
E
EW
W
W.......................................................................................................4
CRUCIAL PERFORMANCE EXPECTATIONS...................................................................5
NEW CAPABILITIES IN XEROX NUVERA
TM
SYSTEM RELEASE 6.0..............................6
OPTIMUM PRODUCT PERFORMANCE ............................................................................7
ENVIRONMENTAL FACTORS ...........................................................................................7
PRODUCT SPACE & POWER REQUIREMENTS..............................................................8
SYSTEM CONFIGURATION AND INSTALLATION ...........................................................8
OPERATIONS.....................................................................................................................9
SUPPLIES AND COMPONENT YIELDS ............................................................................9
SYSTEM PERFORMANCE IMPACTS..............................................................................10
XEROX PRODUCTIVITY PLUS (XPP)..............................................................................11
PRINTERACT (FORMERLY REMOTE SERVICES).........................................................11
COMPATIBLE MEDIA LIST..............................................................................................11
PRODUCT SPECIFICATIONS OVERVIEW BY SUB-SYSTEM........................................16
FREEFLOW MAKEREADY, WEB SERVICES AND PROCESS MANAGER...................16
FREEFLOW VARIABLE INFORMATION (VI) SUITE .......................................................17
NETWORK CONNECTIVITY.............................................................................................18
SCANNER.........................................................................................................................19
DIGITAL FRONT END (DFE) - FREEFLOW™ DOCUSP® ..............................................21
PRINT FROM DIGITAL FILE ............................................................................................22
SCAN TO DIGITAL FILE...................................................................................................22
KIT LIMITATIONS .............................................................................................................23
SHEET FEED MODULE (SFM).........................................................................................24
PRINTER MODULE...........................................................................................................27
MULTIFUNCTION FINISHER: STANDARD & PROFESSIONAL.....................................29
MULTIFUNCTION FINISHER: STANDARD & PROFESSIONAL.....................................29
POST-PROCESS USES OF XEROX NUVERA™ OUTPUT.............................................34
FUTURE FEATURES - XEROX NUVERA™ 100/120 DIGITAL COPIER/PRINTER ........34

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 4 -
I
I
I
N
N
NT
T
TR
R
R D
D
DU
U
UC
C
CT
T
TI
I
I N
N
N
The purpose of this document is to help you understand the current features and capabilities of the
Xerox Nuvera™ 100/120 Digital opier/Printer (D /P). Review of this material is recommended prior to
your signing an order for a Xerox Nuvera™ 100/120 Digital opier/Printer.
This document addresses high-level expectations. Additional details are provided in the training
documentation.
P
P
P
R
R
R D
D
DU
U
UC
C
CT
T
T
V
V
VE
E
ER
R
RV
V
VI
I
IE
E
EW
W
W
The Xerox Nuvera™ 100/120 Digital opier/Printer sets a new benchmark in the world of on-demand
printing. It is a network-able copying and printing system comprised of multiple modules. The Xerox
FreeFlow™ Document Services Platform (FreeFlow™ DocuSP®) is integrated into the Printer Module.
The Scanner scans at 120 images per minute at 600 x 600 dpi, simplex or duplex, and has a 300 sheet
input tray. The standard Sheet Feed Module (SFM) has four drawers that will reliably feed a wide range
of stocks. Two optional Sheet Feed Modules (SFMs) are also available for use as a second SFM: one
with 2 trays (having more large format media capacity), the other with 4 (this latter is the same as the
standard SFM). A 4-tray SFM may also be installed after the printer module and used as an inserter.
The Sheet Feed Module will reliably feed a wide range of stocks. The Printer module prints at 4800 x
600 dpi utilizing a state of the art dual beam laser ROS (Raster Output Scanner) with dedicated image
processing hardware. The Multifunction Finisher module has two models to choose from – the Standard
or the Professional.
The Nuvera Family of Products complies with the American Disability Act, Section 508 of the
Rehabilitation Act.
For the first time, FreeFlow™ DocuSP® not only controls the printer, it now also controls the scanner.
This provides the most flexible, stable copying and printing platform in the industry.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 5 -
Crucial Performance Expectations
The Xerox Nuvera™ 100/120 Digital opier/Printer is a “clean-sheet” design utilizing innovative
technologies. It is the new base platform for Xerox monochrome products.
The following expectations should be explicitly set. Please see the appropriate section of the ED for more
detail.
Availability
The Xerox Nuvera™ 100/120 Digital opier/Printer will be available on a monthly average 92% to 96%
of the time.
• Availability is defined as the amount of time the machine is not being serviced or waiting for service
by Xerox.
• Given similar service coverage, DocuTech® availability averages up to 95%.
Media Capability
• Reinforced stocks should be limited to less than 90 loaded in a tray at one time.
• Tab jobs must be run with reverse collated tabs. Also, Running tabs requires proper use of the
supplied Tab Guides.
• Tabs are supported when the number of segments is 10 or less.
• Envelopes
Envelopes should be limited to 60 loaded in a tray at one time. Nuvera feeder trays feed until almost
empty but not until empty, leaving 20~40 sheets remaining. When running envelopes frequent
reloading of the feeder trays will be required.
Very slight wrinkles (1/2 inch long) may occur on the trail edge of envelopes at the corners.
Due to the nature of feeding envelopes with flap open, some mis-stacking may occur in the top tray
as the envelopes catch on the open flaps.
Envelopes can only be sent to the Top Tray, with a maximum limitation of 15.
• Drilled Paper & Tab Jobs: urrently most jobs are delivered face down, with the bind edge trailing
to match the requirements of the finisher. When tabs are run to the MFF, the tabs must be delivered
with the tab leading and this requires an inversion at the exit of the paper path and entrance into the
finisher. It is quite common to run drilled paper when running tabbed jobs, and this requires the user
to reverse the loading of the drilled body stock in the tray such that the drilled edge is opposite what
the paper tray loading label for drilled body stock shows.
• Windowed stocks are not supported – performance (jams) maybe degraded.
• DocuCards
Docu ards can only be loaded 100 at a time in a tray. Nuvera feeder trays feed until almost empty
but not until empty, leaving 20~40 sheets remaining. When running Docu ards, frequent reloading
of the feeder trays will be required.
Docu ards can only be run to the Top Tray of the finisher. Some mis-stacking may occur as the
Docu ards catch on the edges of the stacked sheets.
Printer Module
• This is not a print to edge system due to potential image quality defects on the edge of the page.
• Printing on SRA3 can result in inboard and outboard edge image quality defects.
• Stocks with pre-printed Xerographic color inks are not suitable for feeding from the Sheet Feed
Module (SFM); such stocks can be fed from the Insertion Module (IM).

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 6 -
• It is highly recommended to avoid printing over pre-printed stocks with offset ink, whenever possible.
When printing over offset inks, image permanence may be compromised. Toner does not adhere to
pre-printed stock with heavy ink coverage. There are other factors that should be taken into account
to successfully print on pre-printed – please refer to the following web site for guidance:
http://www.xerox.com/go/xrx/template/009.jsp?view=Feature&ed_name=Supply_Library_pre_printing&Xcntry=USA&Xlang=en
_US
• Images printed on Mylar tabs are typically degraded by toner scatter.
• Productivity for 8.5” x 14” paper is less than that for 8.5” x 11” paper – refer to the System
Productivity section.
.
FreeFlow™DocuSP®
• The Token Ring option is no longer natively supported in DocuSp. ustomers requiring Token Ring
will need to acquire a bridge box from a vendor providing that capability to connect their Token Ring
to the DocuSP® Ethernet connection.
FreeFlow Digital Workflow Collection
FreeFlow Makeready, Web Services and Process Manager, versions 3.0 and higher, provide full
support for the Nuvera Digital opier/Printer, but customers with earlier versions of these applications
may need to upgrade since SPAR support will not be available.
New Capabilities in Xerox NuveraTM System Release 6.0
• New ontroller platform offering faster RIP performance for complex data streams, as well as improved GUI
response.
• Automatic adjustment of fuser temperature to paper weight around nominal 190 degrees centigrade, so as to
minimize curl for lighter weight stock, and to maximize fuse fix for heavier weight and rough stock. Minor
impacts to productivity may occur if there are large swings in paper weight.
• RUM ( ustomer Replaceable Unit Memory) function recognizes intended toner, and protects against
damage from accidental use of improper toner.
• Productivity enhancement for duplex unfinished jobs with appropriate media in N to 1 face up order.
• Xerox Productivity Plus enhancement, with two separate one-day training sessions.
• Note: ‘ url Improvement Mode’ is not recommended for use in the opier/Printer system.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 7 -
ptimum Product Performance
Print Volume Range
The Xerox Nuvera™ 100/120 Digital opier/Printer is designed for a range of monthly print volumes.
System Average M nthly
Print V lume (AMPV)
C nditi ns
Xerox Nuvera™ 100/120
Digital Copier/Printer
100K – 500K 8.5 in x 11 in/A4
Maximum duty cycle: Up to 700K prints per month
Duty cycle is defined as:
The maximum monthly copy / print volume support under standard vendor supplied service (1X5 shift
coverage). This defines the upper end of expected customer volume band for the device.
The ustomer should consider higher volume machines or multiple machines if average monthly volume
approaches duty cycle on a constant basis.
Prints between service calls on a digital mid-production system are dependent on customer requirements for
quality, volume, applications, and throughput material. Xerox Nuvera™ trained operators can optimize
performance output and help to minimize service calls.
Environmental Factors
Envir nmental Fact r Minimum Maximum
Temperature 50
o
F 10
o
C)
Tested to 60° F
15.6
o
C))
90
o
F 32.2
o
C)
Tested to 80° F
26.7
o
C))
Humidity 15% RH
Tested to 15%)
85% RH
Tested to 80%)
Heat Emissi n (appr ximate)
- SFM /PM/ MFF
2,465 BTU / HR
Standby)
17,537 BTU / HR
Running)
P wer C nsumpti n (appr ximate)
- SFM/ PM/ MFF
0.723 kw
Standby)
4.275 kw
Running)
N ise
(Appr ximate s und pressure level at perat r
p siti n)
42.5 dBA
Standby)
66.3 dBA
Running)
Altitude (ab ve sea level) 0 10,000 ft.
N minal V ltage (Pr cess r) 200 240

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 8 -
Product Space & Power Requirements
Item Xer x Nuvera™ 100/120 Digital
C pier/Printer
C mments
Size – Printer
w/ 1 SFM &
Pr fessi nal
MFF
131.3” W) x 30” D) x 61.6” H)
3336mm x 736mm x 1565.6mm
Width –
additi nal
SFM
31.7” 805mm) Optional
Service Space Fixed: 162” W) x 113” D)
4114.8mm x 2870.0mm)
Moveable: 162” W) x 92” D)
4114.8mm x 2336.8mm)
- Fixed stationary) installation: rear of the
system should be at least 30” from the wall.
- Moveable installation: rear of the system
should be at least 10” from the wall and must
be on mobility plates OR hard surface floor
AND 4 modules or less.
Weight 1,753 lb. 795.1 kg)
Additional SFM – 423 lbs. 191.9 kg)
With consumables loaded except media)
P wer and
Agency
Requirements
N rth America
208 Volts / 30 Amp sole use, 60 Hz
Two phase, 3 wire + PE L1, L2, N, GND)
• UL & cUL compliant
• Complies with the FEMP Federal Energy
Management Program) via the machine
circuit breaker CB); with the CB switched
off, the system consumes less than 1 watt.
• Energy Star eStar) compliant
• Environmental Choice Canada)
• omplies with Section 508 of the ADA
Rehabilitation Act
P wer
Requirements
Eur pe/Japan
200-240 Volts / 25 Amp sole use, 50 Hz
Single phase, 2 wire + PE L, N, GND)
• Energy Star eStar) compliant
• Units are compliant with applicable EU
directives and are CE marked
System Configuration and Installation
Installati n Preparati n D cument
This section should be used in conjunction with the Xerox Nuvera™ 100/120 Digital Copier/Printer
Installation Planning Guide (IPG) and the Xerox Nuvera™ 100/120 Digital Copier/Printer Installation
Preparation Do ument (IPD), which contain detailed specifications for size, weight, electric, and
environmental conditions. Only the most important requirements are stated here.
Customer Responsibilities
The following must be completed before the system can be delivered and will be assessed in the final site
check:
Item C mments
Identify placement f the system
Ensure the printer can be delivered t the site
Supply the appr priate electrical c nnecti ns Dedicated power required
Install an exhaust duct t vent h t air t the air
system r the utside if required
Heat Vent Kit is available for stationary system
installations only. The kit lowers the system’s output
from approximately 17,500 BTU/hour to 8,500 BTU/hr.
Verify the strength and sl pe f the fl r

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 9 -
Item C mments
Meet r m Envir nmental Specificati ns f r
temperature and relative humidity year r und
This is essential t the system’s ability t perf rm
as expected; Xer x will n t be able t res lve
perf rmance pr blems enc untered when the area
is n t maintained within this perating range
Install a netw rk dr p f r Internet access
C nnect system t netw rk including pr xy
server inf rmati n
System Installati n
Allow 4 to 6 hours to complete the system installation.
perations
Item Xer x Nuvera™ 100/120 Digital
C pier/Printer C mment
P wer Up
• Warm up from Power Saver -
3.5 minutes.
• System ready to print queued jobs -
4 minutes, 45 seconds. From Off)
• System UI fully available for Copy programming -
7 minutes. From Off)
• The system may be powered down at night or for
any extended period of time as long as the space
is maintained at the specified temperature and RH.
If the environment does drift
outside the specified range
during the systems powered
down state, some period of
image degradation can be
expected at startup.
First C py Out
Time (FCOT) 8.5 seconds
Copy job sent to the top tray;
platen scan, simplex job, 8.5 x
11 LEF fed from tray 1; no
Insertion Module
First Print Out
Time (FPOT) 9.5 seconds.
Printer should not cycle down
as long as it receives an image
to print within 5 seconds of
completing the previous sheet.
Restart Time
• System ready to print queued jobs -
3 minutes 40 seconds.
• System UI fully available for Copy programming -
5 minutes, 45 seconds.
Billing Meters Available via the Administrati n wind w.
Vary by operating company /
country; ask local analyst or
sales representative to explain
your meter operation.
Automated reading of the billing
meter is available, If Remote
Services are enabled
Supplies and Component Yields
The consumable supplies listed below are engineered specifically for use in the Xerox Nuvera™ 100/120
Digital opier/Printer and provide the highest and most consistent image quality, maximum machine
productivity, and uptime.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 10 -
All yield estimates are based on the indicated 6% area coverage at standardized conditions using 8 ½” x 11”
/ A4 Xerox 20 lb. (75 gsm) stock. Please note that actual yields vary greatly depending on area coverage,
paper stock, and image quality control settings. The current estimates are shown below.
Consumables
Supply Yield Estimates
T ner 110,000 prints/ 10 lb. drum @ 6% AC
100 Sheet Staple
Cartridge
Comes installed in machine. Filled with 1 -
5,000 staple refill, this cartridge typically
lasts the life of machine.
100 Sheet Staple Refills 5,000 staples per refill, 3 refills per carton
50 Sheet Staple
Cartridge
Required for initial 50-sheet stapler capacity
order. Filled with 1 - 5,000 staple refill, this
cartridge typically lasts the life of machine.
50 Sheet Staple Refills 5,000 staples per refill, 3 refills per carton.
Staples Refills f r MFF
B klet Maker
(1 f r rear and 1 f r
fr nt stapler required)
2,000 staples per box; 16,000 per carton
8 Boxes per carton)
Customer Replaceable Units
CRU Yield Estimates
T ner Waste B ttle 750,000 prints
Waste Devel per B ttle 350,000 prints
Disposal Process
All Toner Waste Bottles include a prepaid return shipping label, plastic bag, and tie in the box. This is the
preferred method of disposal.
Empty dry ink containers and waste containers are safe and approved for local recycling with common
commercially used plastics.
More information can be found at www.Xerox.com, under Online Supplies Ordering; artridge Recycling
Program.
System Performance Impacts
The printer should not cycle down as long as it receives a page to print within five seconds of completing the
previous page. Depending on job characteristics, the following may or may not impact system performance.
Item Xer x Nuvera™ 100/120 Digital
C pier/Printer C mment
Print Quality
Adjustments
Brief pauses for registration or
xerographic process adjustments to
maintain high image quality

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 11 -
Item Xer x Nuvera™ 100/120 Digital
C pier/Printer C mment
Mixed Plex
Printing
Switching between one-sided and two-
sided printing does cause some loss of
productivity. The extent of the loss is
directly related to the frequency of the
switch.
Adding a blank side to the job can
minimize impact. Note that this is not
necessary when producing collated sets
run in 1 to N order; in that case the
system automatically optimizes
performance.
Xerox Productivity Plus (XPP)
The Productivity Plus option enables the capability for the advanced customer to carry out certain
maintenance activities. Before this capability can be enabled at a customer location, the designated
customer personnel who will be performing the maintenance will need to be trained and certified by Xerox.
The training is necessary, and available as an option.
prInteract (formerly Remote Services)
The Xerox Nuvera™ Digital opier/Printer is enabled with Remote Services features, including Automated
Remote Monitoring and On Demand Machine Data Transfer. These services provide the ability for the
Xerox Nuvera™ Digital opier/Printer to securely transport the device’s service and engineering data to a
Xerox support server within Xerox’s fire walled environment. Data is transported through the network using
industry standard 128-bit encryption and Secure Socket Layer (SSL) transport protocols.
Enablement of Remote Data Transfer requires two steps:
• Populating of the customer’s machine serial number into the Xerox server. This occurs at order
placement if the customer selects the ONNE T option.
• Installing the customer’s proxy server or Firewall information address on the machine. (Reference
the System Administration Guide for details.)
To sign up for Meter Assistant, customers or Sales Specialists should visit xerox.com: ustomer Resources:
Submit Meter Reads for more information.
Compatible Media List
The media listed on the following pages have been tested and approved for use in the Xerox Nuvera™
Digital opier/Printer.
The Xerox Nuvera Digital opier/Printer images on a wide range of uncoated papers. Results may vary
depending on the paper used. We are pleased to consult with you to help you maximize your objectives.
The Xerox Supplies Group will be available to test particular media in a customer’s application
For more information regarding specific substrates use in the Xerox Nuvera™ Digital opier/Printer, please
call Xerox Supplies at [phone].
For More Information and Pricing, contact your Xerox Supplies Representative, authorized Xerox merchant, or visit us on the web
at www.xerox.com.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 12 -
Digital C l r Xpressi ns+ (96 Bright)
Re rder N . Pr duct Descripti n
3R11380 24# 90 gsm) 8½ x 11
3R11381 24# 90 gsm) 8½ x 11 3-Hole
3R11382 24# 90 gsm) 8½ x 14
3R11383 24# 90 gsm) 17 x 11 SG
3R11386 28# 105 gsm) 8½ x 11
3R11392 28# 105 gsm) 8½ x 11 3-Hole
3R11386 28# 105 gsm) 17 x 11 SG
3R11394 28# 105 gsm) 18 x 12 SG
3R11387 32# 120 gsm) 8½ x 11
3R11388 32# 120 gsm) 17 x 11 SG
3R11389 32# 120 gsm) 18 x 12 SG
3R11390 60# Cover 163 gsm) 8½ x 11
3R11391 60# Cover 163 gsm) 17 x 11 SG
3R11384 60# Cover 163 gsm) 18 x 12 SG
3R11395 80# Cover 216 gsm) 8½ x 11
3R11396 80# Cover 216 gsm) 17 x 11 SG
3R11397 80# Cover 216 gsm) 18 x 12 SG
Digital C l r Xpressi ns 98 (98 Bright)
Re rder N . Pr duct Descripti n
3R5529 28# 105 gsm) 8½ x 11
3R5530 28# 105 gsm) 17 x 11 SG
3R5531 28# 105 gsm) 18 x 12 SG
3R5533 65# Cover 176 gsm) 8½ x 11
3R5534 65# Cover 176 gsm) 17 x 11 SG
3R5535 65# Cover 176 gsm) 18 x 12 SG
3R5537 80# Cover 216 gsm) 8½ x 11
3R5538 80# Cover 216 gsm) 17 x 11 SG
3R5539 80# Cover 216 gsm) 18 x 12 SG
Digital C l r Parchments
Re rder N . Pr duct Descripti n
3R11244 24# 90 gsm) 8½ x 11 White
3R11245 24# 90 gsm) 8½ x 11 Gold
Multipurp se S lar Flares
24# (90 gsm) 90# (163 gsm) Index
Super N va Blue 3R6389 3R6399
Galactic Green 3R6390 3R6400
Sunset Pink 3R6388 3R6398
Sunflare Yell w 3R6391 3R6401
Fireball Red 3R6392 3R6402
Gamma Green 3R6396 3R6406
C smic Orange 3R6397 3R6407
Rainb w 3R6393 3R6403

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 13 -
Business Multipurp se 4200 Paper
Re rder N . Pr duct Descripti n
3R2047 20# 75 gsm) 8½ x 11
3R2641 20# 75 gsm) 8½ x 11 3-Hole
3R2051 20# 75 gsm) 8½ x 14
3R3761 20# 75 gsm) 11 x 17
Multipurp se Recycled Paper (30% PCW)
Re rder N . Pr duct Descripti n
3R6296 20# 75 gsm) 8½ x 11
3R6297 20# 75 gsm) 8½ x 11 3-Hole
3R6298 20# 75 gsm) 8½ x 14
3R6299 20# 75 gsm) 11 x 17
Premium Multipurp se 4024 Paper
Re rder N . Pr duct Descripti n
3R721 20# 75 gsm) 8½ x 11
3R2193 20# 75 gsm) 8½ x 11 3-Hole
3R727 20# 75 gsm) 8½ x 14
3R729 20# 75 gsm) 11 x 17
3R2531 24# 90 gsm) 8½ x 11
3R3317 24# 90 gsm) 8½ x 11 3-Hole
3R3871 24# 90 gsm) 11 x 17
3R2353 28# 105 gsm) 8½ x 11
3R3873 28# 105 gsm) 11 x 17
3R3041 65# Cover 176 gsm) 8½ x 11
3R3004 90# Index 163 gsm) 8½ x 11
3R5102 90# Index 163 gsm) 11 x 17
3R6383 110# Index 203 gsm) 8½ x 11
Digital Color Graphics
Re rder N . Pr duct Descripti n
3R11164 28# 105 gsm) 8½ x 11 Cream White
3R11165 28# 105 gsm) 8½ x 11 Warm White
3R11168 28# 105 gsm) 17 x 11 SG Cream White
3R11169 28# 105 gsm) 17 x 11 SG Warm White
3R11172 28# 105 gsm) 18 x 12 SG Cream White
3R11173 28# 105 gsm) 18 x 12 SG Warm White
3R11176 80# Cover 216 gsm) 8½ x 11 Cream White
3R11177 80# Cover 216 gsm) 8½ x 11 Warm White
3R11180 80# Cover 216 gsm) 17 x 11 SG Cream White
3R11181 80# Cover 216 gsm) 17 x 11 SG Warm White
3R11184 80# Cover 216 gsm) 18 x 12 SG Cream White
3R11185 80# Cover 216 gsm) 18 x 12 SG Warm White
Digital Laser Opaque Paper
Re rder N . Pr duct Descripti n
3R5670 18# 67.5 gsm) 8½ x 11 White
3R5672 18# 67.5 gsm) 17 x 11 SG White
3R5664 20# 75 gsm) 8½ x 11 White
3R5666 20# 75 gsm) 17 x 11 SG White
3R5675 20# 75 gsm) 8½ x 11 Natural
3R5667 24# 90 gsm) 8½ x 11 White
3R5669 24# 90 gsm) 17 x 11 SG White
3R6279 24# 90 gsm) 8½ x 11 Natural
3R5725 28# 105 gsm) 8½ x 11 White
3R5673 65# Cover 176 gsm) 8½ x 11 White
3R5674 65# Cover 176 gsm) 17 x 11 SG White
3R5678 65# Cover 176 gsm) 8½ x 11 Natural
3R5679 65# Cover 176 gsm) 17 x 11 SG Natural

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 14 -
8.5 x 11 11” 3-HD 8.5 x 14 11 x 17
Blue 3R11050 3R11062 3R11074 3R11086
Green 3R11051 3R11063 3R11075 3R11087
Pink 3R11052 3R11064 3R11076 3R11088
Yellow 3R11053 3R11065 3R11077 3R11089
Buff 3R11054 3R11066 3R11078 3R11094
Goldenrod 3R11055 3R11067 3R11079 3R11093
Ivory 3R11056 3R11068 3R11080 3R11090
Gr y 3R11057 3R11069 3R11081 3R11091
S lmon 3R11058 N/A 3R11084 N/A
T n 3R11061 N/A 3R11085 N/A
Lil c 3R11059 3R11070 3R11082 3R11092
Cherry 3R11060 N/A 3R11083 N/A
R inbow 3R11100 N/A N/A N/A
Carb nless Papers
Re rder N . Pr duct Descripti n
3R12374 11”, 2 part str../rev., w/c
3R12375 11”, 2 part, str../rev., w/p
3R12377 14”, 2 part, str.,/rev., w/c
3R12378 17”, 2 part, str../rev., w/c
3R12380 11”, 3 part, str., w/c/p
3R12382 14”, 3 part, str., w/c/p
3R12383 17”, 3 part, str., w/c/p
3R12385 11”, 4 part, str., w/c/p/g
3R12386 14”, 4 part, str., w/c/p/g
3R12387 9” x 11”, vert. Perf., 3 part, str.,
w/c/p
3R12388 8.5” x 11”, vert. Perf., 3 part, str.,
w/c/p
Multipurp se Pastel C l rs
20# (75 gsm)
90# Index (163 gsm) 8.5 x 11
Blue
Yellow
Green
Gray
Ivory
3R5294 3R5295 3R55296 3R5297 3R5298
65# C ver (176 gsm) 8.5 x 11
Blue
Yellow
Green
Gray
Ivory
3R5301 3R5302 3R5303 3R5304 3R5305
NeverTear Paper
Re rder N . Pr duct Descripti n
3R3109 8½ x 11 3-Hole
3R3118 8½ x 11
Punched Papers
Re rder N . Pr duct Descripti n
3R4904 19-Hole for Binders ≥½” BMP 4200)
3R4905 19-Hole for Binders <½” BMP 4200)
3R5134 11-Hole BMP 4200)
3R5818 44-Hole BMP 4200)
3R12163 2-Hole short edge BMP 4200)
3R12164 5-Hole short edge BMP 4200)
3R12165 5-Hole long edge BMP 4200)
3R4299 3-Hole Ring Tuff PMP 4024)
Perf rated Papers
Re rder N . Pr duct Descripti n
3R4160 ½” from left 9 x 11 20# PMP 4024)
3R4175 ½” from left 8½ x 11 20# PMP 4024)
3R4900 3½” from bottom 8½ x 11 24# PMP 4024)
3R4901 3
2
⁄
3
” from bottom 8½ x 11 24# PMP 4024)
3R5125 3½” from bottom 8½ x 11 20# PMP 4024)
3R5126 3
2
⁄
3
” from bottom 8½ x 11 24# PMP 4024)
3R12166 5½” from bottom 8½ x 11 20# PMP 4024)
3R5430 Green Check Stock 8½ x 11 24# PMP 4024)
3R5431 Blue Check Stock 8½ x 11 24# PMP 4024)
Tabs
Re rder N . Pr duct Descripti n
3R4415 90# white 5-Bank 163 gsm)
Reverse Collated Paper
3R5520 90# clear plastic 5-Bank 163 gsm)
Reverse Collated Plastic
3R12366 60# Xpressions+ white 5-Bank 163
gsm) Reverse Collated Paper
3R5717 110# white 5-Bank 203 gsm)
Reverse Collated Paper

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 15 -
Laser/Inkjet Labels
Re rder N . Pr duct Descripti n
3R12050 33-up label 2.83 x 1.00) 8.5 x 11
3R12051 30-up label 2.59 x 1.00) 8.5 x 11
3R12052 24-up label 2.65 x 1.25) 8.5 x 11
3R12053 20-up label 4.00 x 1.00) 8.5 x 11
3R12055 10-up label 4.00 x 2.00) 8.5 x 11
3R12056 8-up label 4.25 x 2.74) 8.5 x 11
3R12057 1-up label 8.5 x 11) 8.5 x 11
Transparencies
Reorder No. Product Description
3R3108 Removable Stripe
3R6218 3-Hole Removable Stripe
3R3117 lear
3R2780 Painted Stripe
3R3028 Paperback
D cument F lders
Re rder N . Pr duct Descripti n
3R4885 90# Docupac
3R5105 65# Laser Docupac
High Speed Labels
Re rder N . Pr duct Descripti n
3R4476 1-up label 8.5 x 11) 8.5 x 11
3R3146 6-up label 4.25 x 3.66) 8.5 x 11
3R4475 8-up label 4.25 x 2.74) 8.5 x 11
3R5719 14-up label 4.25 x 1.59) 8.5 x 11
3R4474 24-up label 2.83 x 1.31) 8.5 x 11
3R3139 33-up label 2.83 x 1.00) 8.5 x 11
DuraPaper
Re rder N . Pr duct Descripti n
3R12063 11 x 17
3R12064 8½ x 11
3R12065 8½ x 11 3-Hole

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 16 -
Product Specifications verview by Sub-System
The following sections give more detailed descriptions of the capabilities and limitations of each of the major
system components.
FreeFlow Makeready, Web
Services and Process
Manager
Version 4.0 of FreeFlow Makeready, Web
Services and Process Manager is
available and provides full support for
Xerox Nuvera™ 100/120 Digital opier/Printer image quality and job ticketing, as well as IQI (Image Quality
Interoperability).
ustomers with earlier versions (prior to 3.0) of FreeFlow applications may need to upgrade since SPAR
support will not be available.
Earlier versions of DigiPath (3.X or below) have not and will not be changed to support the Xerox Nuvera™
100/120 opier / Printer as a “targeted device”. DigiPath customers with earlier software releases will be
provided a “best case” print path utilizing an existing supported printer to optimize image quality.
• When scanning with the “Document Scan and Makeready” application, best Image Quality results will be
achieved using “Generic Write White” when submitting from DigiPath.
• When scanning with the “Scan and Print” application, best Image Quality results will be achieved using
“DT75/90” when submitting from DigiPath.
• When Image Quality is not a primary concern, select the DT6180 printer when submitting a job, for the
most comprehensive set of Job Ticket Attributes.
Jobs sent from these DigiPath units will have to be held and re-programmed to ensure correct job attributes.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 17 -
FreeFlow Variable Information (VI) Suite
The FreeFlow VI Software Suite provides a variable data software suite with focus on VIPP (Variable data
Intelligent Postscript Printware) - a Xerox technology building on the power of postscript with the goal of a
powerful Variable Data solution that can make document creation as simple as just sending the data. Print
shop operators and supervisors can also easily print variable data applications in electronic format, as pdf
files, with the VI PDF Originator.
Print Speed/System Performance
In general, the Xerox Nuvera™ 100/120 is capable of efficiently handling variable data jobs. The exact size
of the run length will vary based on the amount of variable coverage and element demographics (size and
percentage of variable text vs. images/graphics).
Overall system performance (click-to-clunk) is dependent upon many factors, including the variable data
application and workflow, network environment, image quality settings, and RIP and print rates.
Variable Information Software Limitations
Note: The following limitations are specific to variable information, which may not be inclusive of the entire
system independent of whether a job includes variable data.
FreeFlow VI Interpreter
Adobe Portable Document Format (PDF)
• PDF cannot be used as a direct input resource for VI Interpreter. Direct printing of PDF files within a VIPP
workflow is not supported. PDF files can be converted to PostScript (using an Adobe compliant driver) and
the VIPP Resource onverter or other third party PDF to PostScript converter. PostScript is an input
resource supported by the VI Interpreter.
• The VI PDF Originator component of the VIPP workflow can output intelligent, interactive PDF files directly
from a VIPP data file. For more information on the capabilities of the VI PDF Originator contact your Xerox
representative .
Support for the FreeFlow VI Suite may also be obtained by contacting the Variable Information and
Solutions Services Group (VISSG). ustomers may call [phone].
FreeFlow Print Manager / IPP
The XDS software has been discontinued. A replacement is the FreeFlow Print Manager,
which is a separate, standalone product available for purchase.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 18 -
Network Connectivity
The Xerox Nuvera™ 100/120 Digital opier/Printer supports industry standard network protocols and Page
Description Languages (PDL).
Item Xer x Nuvera™ 100/120 Digital
C pier/Printer
C mments
C nnecti ns • Ethernet Interface 10/100/1000 BaseT)
− Licensed pti n
− Opti nal c nnecti n
− T ken Ring is n t natively supp rted
and requires a bridge b x
Netw rk
Pr t c ls
• TCP/IP
• LPR
• IPP
• HTTP
• Novell SPX,IPX)
• AppleTalk
• SNMP
− Pr t c ls available with Ethernet
license
Scan t
Netw rk Save
• SMB
• FTP
• Secure FTP
• NFS
− Set up Instructi ns f r Scan T File
with NFS (Netw rk File System) can
be f und in the Xer x Nuvera100/120
Digital C pier/Printer Hints & Tips
(701P25530)
PDLs • Adobe PostScript Level 3
• Adobe PDF
• HP/PCL 5e & PCL6
• TIFF
• Multi-Page TIFF
• ASCII
− PCL is bundled with the Netw rk
licenses in rder t supp rt ASCII
printing
D cument
Submissi n
• Microsoft Windows 95,98,ME, NT4.0, 2000, XP
Printer Drivers
• Apple Macintosh OS8, OS9, OSX Printer
Drivers
• Sun Microsystems Solaris 2.6, 7.x, 8.x , 9.0 , 10
• Linux 2.x
• Xerox FreeFlow
TM
Print Manager for direct PDL
submission from clients see previous section)
• Xerox Web User Interface
− Wind ws 95, 98, and ME are
supp rted via PPD nly.
− WHQL (Wind ws Hardware Quality
Lab) certified f r the P stScript and
PCL 6 drivers.
− Drivers are available f r d wnl ad
fr m the Xer x.c m web site.
− Mac OS X Classic M de supp rts the
drivers and FreeFl w™ Print Manager
− Mac OS X versi n 10.2.6 and ab ve
will supp rt FreeFl w™ Print Manager
− Mac OS X versi n 10.3 and up will
supp rt drivers natively in a future
s ftware release
− PPD files and FreeFl w™ Print
Manager f r S laris and Linux use.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 19 -
Scanner
Integrated scanner and document handler that utilizes a Xerox
patented Dual scan head array.
Item Xer x Nuvera™ 100/120 Digital
C pier/Printer
C mments
Simultane us Dual
D cument Feeder
(SDDF)
• 300 sheet capacity 20 lb. bond)
• 5.5” x 8.5” to 11” x 17” sheets
139.7 x 215.9 to 279.4 mm x 431.8mm)
• 13 lb. bond to 113 lb. index 49 to 220 gsm)
Scan Speed • 120 images per minute one sided 8.5” x 11”/A4
120 sheets per minute
• 120 images per minute two sided 8.5” x 11”/A4
60 sheets per minute
Scan Res luti n • 600 x 600 dpi
• 8-bit Gray 256 shades)
• C py j bs are saved at
1200 x 600 dpi, 1-bit depth
• C py j bs are n t
intended f r utput t
ther printers
Maximum Paper Size & Maximum Image Size
The maximum paper size that can be placed on the platen is 12.6” x 18.5” / 320mm x 470mm. The
maximum image size, however, is 12.0” x 18.0” / 305mm x 457mm
Color
This is not a color scanner.
Scan-to-Email
There is no “scan-to-email” feature.
Input Document substrates
Document substrates that are not recommended for use in the SDDF include envelopes, metallic cover
stock, transparencies, label stock, silver photographic paper, tab stock, Never Tear (or other manufacturers’
equivalent), and those substrates whose intrinsic characteristics limit or prevent the separation of
documents with friction-retard feeding mechanisms without causing mis-feeds, multi-feeds, jams or
document damage.
Carbonless paper
arbonless paper passed through the document feeder may be subject to marking in areas where the
document feeder’s paper handling elements come in contact with the carbonless stock due to the “marking
characteristics” of this stock. In extreme cases, this unintended marking could obliterate information from the
page being reproduced.
Hole punched paper
The SDDF may not reliably feed GB and similar type documents without damage to the original and
without registration/skew errors. The workaround for GB , spiral-bound and similarly punched papers is to
rotate the documents to feed the unbound edge first, and then rotate the image.
File Size Limitation
Files saved as Multi-page TIFF are limited to 2GB in size. This limit may be reached after a few hundred
images if the scanned originals contain many images and are scanned at 1200 x 1200 resolution.

Xer x Nuvera™ 100/120 Digital C pier/Printer Cust mer Expectati ns D cument
- 20 -
Scan to Digital
The system is capable of scanning to the hard drive, a NFS mounted drive, any network drive or desktop, or
the D-RW drive. The following resolutions are supported.
Exp rted
Res luti n
Halft ne Screen Frequency
(Ph t M de) Purp se
1200 x 1200 x 1 125 lpi @ 53°, 106 lpi @ 45°, 85 lpi @ 45° Xerox Nuvera™ 100/120 CP remote printing
1200 x 600 x 1 125 lpi @ 53°, 106 lpi @ 45°, 85 lpi @ 45° Saving Copy jobs
600 x 600 x 1 125 lpi @ 53°, 106 lpi @ 45°, 85 lpi @ 45° DocuTech 61XX printing
400 x 400 x 1 125 lpi @ 53°, 106 lpi @ 45°, 85 lpi @ 45° Good for some Fax applications
300 x 300 x1 125 lpi @ 53°, 106 lpi @ 45°, 85 lpi @ 45° Minimal file size