Xerox WorkCentre M128 User manual

WorkCentre M128/M123 Reference Guide Page 1
dc05cc0364
Xerox DocuColor
Accessing Extended
Features
Overview
This document enables you to access the extended features of the WorkCentre
M128/M123 in environments where Xerox does not provide a custom driver.
NOTE: Some of the commands and syntax used in this documents requires
familiarity with either PostScript (PS) or Printer Command Language (PCL).
This document provides the Printer Description Language (PDL) commands
and syntax for each feature. The following items are also included:
• A PostScript tables that describes the PostScript features the WorkCentre
supports and the syntax to use the feature.
• A PCL table that describes the PCL features the WorkCentre supports and
the syntax to use the feature.
This document is not intended to be a complete PS or PCL reference manual: it
is a guide for using the PS and PCL commands with WorkCentre. Refer to
these additional reference materials: PostScript Language Reference Manual,
Third Edition, ISBN 0-201-38922-8, PCL5 Printer Language Technical
Reference Manual Hewlett-Packard manual and Printer Job Language
Technical Reference Manual, Hewlett-Packard manual.
Using this Guide
1. Search the Feature Table to determine whether the feature you wish to use
is supported.
2. Verify that the feature is supported by the platform. For example, the
WorkCentre must have the Finisher option installed to use stapling
commands.
3. Following across the table to find the syntax listed for the PDL examples
shown. Read the Dependencies/Caveats section.
Xerox WorkCentre
PDL Reference Guide for the
WorkCentre M128/M123 October 20, 2004
dc05cc0364

Page 2 WorkCentre M128/M123 Reference Guide
dc05cc0364
PostScript
This WorkCentre supports PostScript 3 commands that enable the features
listed in the following table.
Feature Description
Media Size Physical paper (media) size (width and height)
Media Direction Feed direction of paper
Media Source Feed tray
Media Source
from SMH Specify if you feed from SMH (Sheet Media Handler).
Media Color Paper color
Media Weight Media weight. Unit: (g/㎡) gram per square-meter
Media Class Specify a Media Class value to trigger media-related actions (for
example, half-speed).
Media Type Spefify a paper type (for example, cover stock).
Media Selection Specify if you apply the strict setpagedevice rule to media
selection.
Resolution Horizontal and vertical resolution
Duplex Delivers two-sided output. landscape documents read like a
calendar, and portrait documents read like a book.
Image
Enhancement Specify whether to apply edge-smoothing to output after
rendering.
Toner Save Specify whether to lighten output density to save toner.
Halftone Screen
Selection Screen type
Output Location Output bin
Quantity Number of copies. (maximum: 9999)
Collation Multiple pages in sequential sets (page 1, 2, 3, 4, etc.) or multiple
pages in sets of the same page (4 copies of page 1, 4 copies of
page 2, etc.)
Jog Deliversoffsetting document sets.
Stapling Indicates a staple position.
Interleaving
Paper Insert blank sheet between OHP (transparency) sheets
Process Color
Model Select process color model (DeviceGray, DeviceRGB, DeviceCMYK,)
Separations Specify to generate multiple color separations for each page of
output

WorkCentre M128/M123 Reference Guide Page 3
dc05cc0364
Feature Description
Separation Color
Names Specify the process colorant name.
Separation
Order Specify the order of process colorant name.
Use CIE Color Specify to apply CIE-based color space through color conversion
PostScript Implementation
This section describes the PostScript commands required to access specific
WorkCentre features. The following table lists each feature and the PostScript
syntax required to use the feature. After the table are examples of how to use
these commands and what the PostScript file looks like.
For more information about PostScript commands, refer to the PostScript
Language Reference Manual, Third Edition, ISBN 0-201-37992-8.
PostScript Print Features/Implementation
* = default value
Feature Implementation Values
Media Size <</PageSize [width height]>>
setpagedevice
[width x height] in 1/72 inch (points)
[842 1191] = A3
[595 842] = A4
[420 595] = A5 †
[729 1032] = B4
[516 729] = B5
[396 612] = Statement (5.5 x 8.5) †
[612 792] = Letter (8.5 x 11)
[612 936] = Legal 13 (8.5 x 13)
[612 1008] = Legal (8.5 x 14)
[792 1224] = 11 x 17
[522 756] = Executive (7.25 x 10.5) †
[765 1106] = 8Kai †
[757 1100] = 8Kai †
[553 765] = 16Kai †
[550 757] = 16Kai †
†: Each paper size is available based on
non-volatile memory setting.
The following paper sizes are only available
with SMH.
[297 420] = A6
[363 516] = B6
[576 720] = 8 x 10
[609 892] = 8.46 x 12.4
[792 1080] = 11 x 15
[632 842] = A4 Cover
[648 792] = Letter Cover (9 x 11)
[283 420] = Hagaki (Japanese PostCard)
[420 567] = Double Hagaki
[279 540] = Monarch
[297 684] = Com-10
[312 624] = DL
[288 432] = Postcard
[649 918] = C4

Page 4 WorkCentre M128/M123 Reference Guide
dc05cc0364
Feature Implementation Values
[459 649] = C5
[340 666] = Tyoukei You 3
Media
Direction <</LeadingEdge int >> setpagedevice Where int is one of the following:
0 = Short Edge; top of page in portrait
orientation.
1 = Long Edge; left side of page in portrait
orientation.
2 = Short Edge; bottom of page in portrait
orientation.
3 = Long Edge; right side of page in
portrait orientation.
null* = Auto
Media Source <</MediaPosition int>>
setpagedevice Where int is one of the following:
0 = Tray1
1 = Tray2
2 = Tray3
3 = Tray4
null* = Auto
Media Source
from SMH <</ManualFeed value>>
setpagedevice Where value is one of the following: true = Feed paper from SMH
false* = Feed paper from a tray other than
SMH
Media Color <</MediaColor (string) >>
setpagedevice Where string is any value.
Media Weight <</MediaWeight real >>
setpagedevice Where real is in g/㎡(gram per
square-meter) or null
Media Class <</MediaClass (string)>>
setpagedevice
Where string is one of the following:
Stationary = normal paper
recycled = recycled paper
transparency = OHP sheet
thick1 = thick paper 1
thick2 = thick paper 2
user1 = user defined paper 1
user2 = user defined paper 2
user3 = user defined paper 3
user4 = user defined paper 4
user5 = user defined paper 5
thin = thin paper
label = label paper
used = backing paper
Media Type <</MediaType (string)>>
setpagedevice
Where string is any value.

WorkCentre M128/M123 Reference Guide Page 5
dc05cc0364
Feature Implementation Values
Media
Selection <</DeferredMediaSelection value>>
setpagedevice
Where value is one of the following:
true* = Deferred media selection by
output device (more powerful and flexible
media selection)
false = Immediate media selection by
strict setpagedevice operator
Resolution <</HWResolution [x y]>>
setpagedevice
Where xand yare one of the following:
600 600*(dpi)
1200 1200
Duplex <</Duplex value>>
setpagedevice Where value is one of the following: true = Duplex
false* = Simplex
Tumble <</Tumble value>>
setpagedevice
This feature is effective only in
conjunction with Duplex = true.
Where value is one of the following:
true = Tumble (Short edge binding
Duplex)
false* = Duplex (Long edge binding
Duplex)
Image
Enhancement <</PostRenderingEnhance true /PostRenderingEnhanceDetails
<< /Type 32 /REValue int >>
>>
setpagedevice
Where int is one of the following:
0 = No image enhancement
1* = Activate image enhancement
Toner Save <</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /TonerSaver int >>
>>
setpagedevice
Where int is one of the following:
0* = No toner saving
1 = Lighten output density, toner saving
Halftone
Screen
Selection
<</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /EngineScreen int >>
>>
setpagedevice
Where int is one of the following:
0* = Low frequency screen
1 = High frequency screen
2 = Compatible screen with FX standard
PDL’s
Output
Location <</OutputType (string)>>
setpagedevice
Where string is one of the following:
CENTER TRAY: facedown tray #1 (w/o
finisher)
CENTER TRAY2: facedown tray #2 (w/
finisher)
SIDE TRAY: faceup tray
FINISHER TRAY1: finisher tray
Null = Not specified

Page 6 WorkCentre M128/M123 Reference Guide
dc05cc0364
Feature Implementation Values
Quantity <</NumCopies value >>
setpagedevice Where value is one of the following:
integer from 1 to 9999: number of copies
null: Not specified
Collation <</Collate value >>
setpagedevice Where value is one of the following: true = collated
false* = uncollated
Jog <</Jog int >>setpagedevice Where int is one of the following:
0 = Do not offset
3 = Offset at the beginning of each page
[set]
Stapling <</Staple int1
/StapleDetails << /Type 7
/Location int2 >>
>>
setpagedevice
Where int1 is one of the following:
0* = Do not staple
3 = Staple at the end of each set
Where int2 is one of the following:
0* = top-left-single
1 = bottom-left-single
2 = top-right-single
3 = bottom-right-single
4 = top-double
5 = bottom-double
6 = left-double
7 = right-double
Interleaving
Paper <</SlipSheet int1
/SlipSheetDetails << /Type 1
/AutoTraySelect int2
/SheetTray int3
/MediaClass (string) >>
>>
setpagedevice
Where int1 is one of the following:
0 = Do not deliver interleaving paper.
4 = Deliver interleaving paper at the end
of each page
Where int2 is one of the following:
0 = SheetTray is referred and feed
interleaving paper from the SheetTray
1* = Feed interleaving paper from a tray
following system setting. SheetTray is
not referred.
Where int3 is one of the following:
0* = Feed interleaving paper from Tray1
1 = Tray2
2 = Tray3
3 = Tray4
100 = SMH
Where string is same as the “Media
Class” feature. It means media class for
the interleaving paper.

WorkCentre M128/M123 Reference Guide Page 7
dc05cc0364
Feature Implementation Values
Process Color
Model <</ProcessColorModel name >>
setpagedevice Where name is one of the following: /DeviceGray
/DeviceRGB (with Separations true)
/DeviceCMYK (with Separations true)
/DeviceCMY (with Separations true)
/DeviceRGBK (with Separations true)
Separations <</Separations value >>
setpagedevice Where value is one of the following:
true = Multiple color separations will be
generated for each page of output.
false* = All colorants will be combined into a
single composite page on a single
sheet of physical medium.
Separation
Color Names <</SeparationColorNames value>>
setpagedevice
Where value is an array.
Legal element values are the process
colorant names implied by the process
color model.
Valid colorant names for each process
color model are like the following in case
of separation
DeviceCMYK = Cyan, Magenta, Yellow,
Black
DeviceCMY = Cyan, Magenta, Yellow
DeviceRGB = Red, Green, Blue
DeviceRGBK = Red, Green, Blue, Gray
DeviceGray = Gray
Separation
Order <</SeparationOrder value>>
setpagedevice
Where value is an array.
Legal element values are the process
colorant names implied by the process color
model.
Use CIE Color <</UseCIEColor value>>
setpagedevice Where value is one of the following: true = Re-map each color from device
color space to device
independent’s CIE- based color
space
false* = Do not re-map color
Job Name
Job Type
Accounting
Delay Print
These features use PJL commands as described in “PCL/PJL Implementation.”
Refer to that section for information about these features.

Page 8 WorkCentre M128/M123 Reference Guide
dc05cc0364
Sample PostScript Headers
Example 1 Header for Simple Print
%!PS
Example 2 Header for Finishing
(Letter paper, duplex, 10 copies with collation, stapling with left-upper single
and stacker tray for output bin)
%!PS
<</PageSize [612 792]>>setpagedevice
<</Duplex true /Tumble false>>setpagedevice
<</OutputType (FINISHER TRAY1)>>setpagedevice
<</Collate true>>setpagedevice
<</NumCopies 10>>setpagedevice
<</Staple 3 /StapleDetails << /Type 7 /Location 0 >>
>>setpagedevice
PostScript Feature Dependencies/Caveats
• All DSC comments are ignored and not interpreted.
• The WorkCentre supports PostScript resolutions up to and including 1200 x
1200. Some PostScript jobs may not print if you use this resolution. If
printing stops, reprint the same job at a lower resolution.
• Valid media sizes for duplexing are between [253 x 360] and [841 x 1224]
(point) except Hagaki, Double Hagaki, Postcard, Tyou-Youkei 3, Com10,
Monarch, DL, C4, and C5.
• Valid media sizes for stapling includeA3, A4, B4, B5, 8.5x11, 8.5x13,
8.5x14, 11x17, 8-Kai, 16-Kai, and 7.25 x 10.5.
• Do not duplex transparency and recycled paper jobs.
• Do not staple any job with all paper class except stationary, recycled and
used (backing) paper.

WorkCentre M128/M123 Reference Guide Page 9
dc05cc0364
PostScript Fonts
The following PostScript fonts are resident with Adobe interpreter.
Albertus
Albertus Italic
Albertus Light
Antique Olive Roman
Antique Olive Italic
Antique Olive Bold
Antique Olive Compact
Apple Chancery
Arial
Arial Italic
Arial Bold
Arial Bold Italic
ITC Avant Garde Gothic Book
ITC Avant Garde Gothic Book Oblique
ITC Avant Garde Gothic Demi
ITC Avant Garde Gothic Demi Oblique
Bodoni Roman
Bodoni Italic
Bodoni Bold
Bodoni Bold Italic
Bodoni Poster
Bodoni Poster Compressed
ITC Bookman Light
ITC Bookman Light Italic
ITC Bookman Demi
ITC Bookman Demi Italic
Carta
Chicago
Clarendon Roman
Clarendon Bold
Clarendon Light
Cooper Black
Cooper Black Italic
Copperplate Gothic 32BC
Copperplate Gothic 33BC
Coronet
Courier
Courier Oblique
Courier Bold
Courier Bold Oblique
Eurostile Medium
Eurostile Bold
Eurostile Extended No. 2
Eurostile Bold Extended No. 2
Geneva
Gill Sans
Gill Sans Italic
Gill Sans Bold
Gill Sans Bold Italic
Gill Sans Light
Gill Sans Light Italic
Gill Sans Extra Bold
Gill Sans Condensed
Gill Sans Condensed Bold
Goudy Oldstyle
Goudy Oldstyle Italic
Goudy Bold
Goudy Bold Italic
Goudy Extra Bold
Helvetica
Helvetica Oblique
Helvetica Bold
Helvetica Bold Oblique
Helvetica Narrow
Helvetica Narrow Oblique
Helvetica Narrow Bold
Helvetica Narrow Bold Oblique
Helvetica Condensed
Helvetica Condensed Oblique
Helvetica Condensed Bold
Helvetica Condensed Bold Oblique
Hoefler Text
Hoefler Text Italic
Hoefler Text Black
Hoefler Text Black Italic
Hoefler Ornaments
Joanna
Joanna Italic
Joanna Bold
Joanna Bold Italic
Letter Gothic
Letter Gothic Slanted
Letter Gothic Bold
Letter Gothic Bold Slanted
ITC Lubalin Graph Book
ITC Lubalin Graph Book Oblique
ITC Lubalin Graph Demi
ITC Lubalin Graph Demi Oblique
Marigold
Monaco
ITC Mona Lisa Recut
New Century Schoolbook Roman
New Century Schoolbook Italic
New Century Schoolbook Bold
New Century Schoolbook Bold Italic
NewYork
OCR-B Letterpress M
Optima Roman
Optima Italic
Optima Bold
Optima Bold Italic
Oxford
Palatino Roman
Palatino Italic
Palatino Bold
Palatino Bold Italic
Stempel Garamond Roman
Stempel Garamond Italic
Stempel Garamond Bold
Stempel Garamond Bold Italic

Page 10 WorkCentre M128/M123 Reference Guide
dc05cc0364
Symbol
Tekton Regular
Times Roman
Times Italic
Times Bold
Times Bold Italic
Times New Roman
Times New Roman Italic
Times New Roman Bold
Times New Roman Bold Italic
Univers 45 Light
Univers 45 Light Oblique
Univers 55
Univers 55 Oblique
Univers 65 Bold
Univers 65 Bold Oblique
Univers 57 Condensed
Univers 57 Condensed Oblique
Univers 67 Condensed Bold
Univers 67 Condensed Bold Oblique
Univers 53 Extended
Univers 53 Extended Oblique
Univers 63 Extended Bold
Univers 63 Extended Bold Oblique
Wingdings
ITC Zapf Chancery Medium Italic
ITC Zapf Dingbat