Xerox WorkCentre 3615 User manual

Xerox WorkCentre 3615

Machine Overview
Document
Feeder
Control Panel
Tray 1
Bypass Tray
Output Tray

Loading Paper in Tray 1
Make sure the
Green Guides are
right up again the
paper.
Keep an eye on the Max Line. We
do not want to over load the tray
with paper.
Note: You will need to confirm the paper size and type on the control panel once you close
the tray.

Bypass Tray
Bypass Tray: Use this option when feeding individual types of stock, for example,
letterhead, cardstock or labels. Make sure the grey guides are right up against the
paper.
Note: You will need to confirm the paper size and type on the control panel once you
place the media in the bypass tray.

Loading Originals
Document Feeder: The original will go in face up
and make sure the gray guides are right up
against the paper
Document Glass: The original will go face down
on the glass. For 2 sided copying the machine
will prompt you to flip the document and press
start again.

Confirming Paper Changes
Once you close a tray or put something into the bypass tray the confirmation screen will
appear and you will have the options to change the tray setting.
Adjust the paper size, paper type, and the color of the paper as needed.
8.5x11

Control Panel
Stop
Touch Screen
Keypad
Services Home: Will
always bring you back to
the screen shown below.
Machine Status:
Basic information
about the device. Job Status: Select this button to active job,
completed jobs, and retrieve Secure Print jobs.
Start: Press start
to began a copy
job, send a fax, or
an email.
Clear All: Will clear everything back to
default settings.
Energy Saver:
Press this
button when
the machine is
in low power
mode.

Services Home
Services Home is where you can access all the features available on the machine.

Standard Login
Swipe you’re Connecticut College ID Card to login
If user’s card number is not in the PaperCut Database the user will be
prompted to enter their Connecticut College User Name and
Password.

The first time you use your ID card you will need to register.
The machine will prompt you to enter both your Connecticut College User Name and
Password.
Hit done after each request. Your card will now be registered to all machines. You will now be
able to swipe to login and out of the machines.