Xerox Phaser 8560 User manual

Xerox Phaser 8560 printer
Letter of Volatility
The chart below shows the corresponding memory types for the Xerox Phaser
8560 printer. Please note, there are no remnants of customer print data retained
in the printer when both of the following are true:
(a) The power is turned off
(b) The hard disk drive is removed (from printers with hard drives)
Phaser 8560
Model Number Memory Size Standard/
Maximum
Memory Type Volatility User Data
8560/N 256/1GB DDR SDRAM Volatile Yes
8560/DN 256/1GB DDR SDRAM Volatile Yes
8560/DP 256/1GB DDR SDRAM Volatile Yes
8560/DT 256/1GB DDR SDRAM Volatile Yes
8560/DX 256/1GB DDR SDRAM Volatile Yes
8560/DX 40GB Hard Disk
(Standard) Non-volatile Yes
8560/DT 40GB Hard Disk
(Optional) Non-volatile Yes
8560/DP 40GB Hard Disk
(Optional) Non-volatile Yes
All models 8K (Head) EEPROM Non-Volatile No***
All models 32 Byte
(Maintenance
kit)
EEPROM Non-Volatile No***
All models 32K(N/W,
Engine) EEPROM Non-Volatile No***
All models 24MB Flash Non-Volatile No***
All models 32K Configuration
Card(EEPROM) Non-Volatile No***
Note:
Flash is used for Firmware code and contains no user data.
*** All EEPROM’s do not contain user print data