Xerox Synergix 8850 User manual

03/2003
1
8850/ 510DP
Transmittal Page
Transmittal Page
........................................................................................................................................ 3

03/2003
28850/ 510DP
Transmittal Page

Transmittal Page
Product
8850/Wide Format
System 510DP
Printers
Title
Service Manual
Part Number
701P39271
Revision Date
March 2003
Please Read
Unless specified otherwise, all information provided in this service manual applies to both the 8850 and the Synergix Print System
SPS 510dp printers. Photographs and illustration may show the external view of the 8850, however the procedure can also be done
on the SPS 510dp. Some of the covers may latch and open differently, but when opened the internal components are serviced in the
same manner. The SPS 510dp differences are highlighted in blue. The product name Synergix Print System 510dp will be used inter-
changeably with SPS510dp within this manual.

CHANGE HIGHLIGHTS
Section 1: No Changes for 510dp
Section 2: No Changes for 510dp
Section 3: No changes for 510dp
Section 4:
Revised REP 3.1 to remove P193 Cover instead of the Controller for 510dp.
Add new repair procedure REP 3.3 510dp Control Panel.
Revised REP 7.1 Media Supply Drawer to add note that Drawers 2 and 3 are optional on
510dp.
Revise REP 7.9 Media Drive Motor to add new Media Drive Chain reference for 8850 W/Tag 11
and 510dp.
Revise REP 14.1Top Cover to show complete removal procedure and add 510dp differences.
Revised ADJ 3.2 Line Current Limit to add 115 VAC 20 Amp service for 510dp running 5 and 7
D/A1 size prints per minute..
Revised ADJ 10.2 Fuser Drive Interlock Switch 8850 W/O TAG 8. Interlock Switch is only
adjustable on 8850 without tag 8.
Added ADJ 10.3 Fuser Drive Motor. The Fuser Drive Motor is only adjustable on the 510DP.
Section 5: Updated to latest configuration for 8850 and added SPS 510 dp differences.
Section 6:
Revised System and Configuration table to include 510dp differences.
Revised the Installation Procedure to include 510dp differences.
Updated Product Specification to include the 510dp differences.
Section 7:
Revised BSDs 7.2, 7.3, and 7.4 to show new A3P609 connector wiring for 710dp.
Corrected Part List reference for Sheet Feed components

03/2003
1
8850/ 510DP
Title Pages
Title Pages
............................................................................

03/2003
28850/ 510DP
Title Pages

8850/Wide Format
System 510dp Printers
Service Manual
THE DOCUMENT COMPANY
XEROX
CAUTION
Certain components in the 8850 Printer and SPS
510dpare susceptibleto damagefromelectrostatic
discharge. Observe all ESD procedures to avoid
component damage.
701P39271
March,2003

03/2003
1
8850/ 510DP
Introduction
Introduction
About this Manual ........................................................................................................... iii
Organization.................................................................................................................... iii
How to Use This Manual................................................................................................. iv
Repair Analysis Procedures (RAPs) ............................................................................... v
Repair / Adjustment Procedures ..................................................................................... v
Reference Symbology..................................................................................................... vi

03/2003
28850/ 510DP
Introduction