Xerox -05W User manual

TeemTalk
-05W, -07W & -11W
User's Guide

UK
Neoware UK Ltd
The Stables, Cosgrove
Milton Keynes MK19 7JJ
Tel: [phone]
Fax: [phone]
Email: [email protected]
USA
Neoware, Inc.
3200 Horizon Drive
King of Prussia, PA 19406
Tel: [phone]
Fax: [phone]
Email: [email protected]

TeemTalk
Software Support
Telephone: [phone]
Web: http://www.neoware.com/support/
Software Version 4.3.1
November 1999
Part number: TT6TM-4.3.1
Neoware UK Ltd,
The Stables, Cosgrove,
Milton Keynes, MK19 7JJ
Tel: [phone]
Fax: [phone]
TeemTalk © 1988-2003 Neoware UK Ltd, All Rights Reserved.

The material in this user's guide is for information purposes only
and is subject to change without notice. Neoware UK Ltd
accepts no responsibility for any errors contained herein.
Trademarks
TeemTalk is a registered trademark of Neoware UK Ltd.
ADDS Viewpoint A2 is a trademark of Applied Digital Data Systems Inc.
D100, D200 and D410 are trademarks of Data General.
DEC, VT52, VT100, VT131, VT220, VT300, VT320, VT340, VT420, ReGIS,
DECnet, LK250 and LK450 are registered trademarks of Digital Equipment
Corporation.
Ethernet is a registered trademark of Xerox Corporation.
Hazeltine is a trademark of Esprit Systems, Inc.
HP700/92, HP2392A and HP2622A are trademarks of Hewlett Packard Company.
IBM is a registered trademark of International Business Machines Corporation.
INFOConnect and Unisys are trademarks of Unisys Corporation.
Microsoft and MS-DOS are registered trademarks, and Windows and Excel are
trademarks of Microsoft Corporation.
NEWT is a trademark of NetManage, Inc.
OSLAN is a registered trademark of ICL.
PathWay is a trademark of the Wollongong Group, Inc.
PC/TCP is a registered trademark of FTP Software, Inc.
PowerStation is a trademark of KEA Systems.
Prime is a registered trademark and PT250 is a trademark of Prime Computer, Inc.
Reflection is a registered trademark of Walker Richer & Quinn, Inc.
Retrographics and VT640 are registered trademarks of Digital Engineering, Inc.
Sun, PC-NFS and NFS are registered trademarks of Sun Microsystems, Inc.
Tandem, NonStop and LXN are trademarks of Tandem Computers Inc.
TeleVideo is a registered trademark, and TeleVideo 910, 910+ and 925 are trademarks
of TeleVideo Systems, Inc.
Tektronix is a registered trademark of Tektronix, Inc.
Westward is a registered trademark of Telemetrix, Inc.
WordPerfect is a trademark of WordPerfect Corporation.
WYSE is a registered trademark, and WY-50, WY-50+ and WY-60 are trademarks of
Wyse Technology Inc.
All other product names are trademarks of their respective manufacturers.
© 1988-2003 Neoware UK Ltd, All Rights Reserved.
Before reproduction of this material in part or in whole, obtain
written consent from Neoware UK Ltd.

Contents-1
Contents
Contents
Introduction ....................................................... 1-1
What Is TeemTalk? ........................................................................ 1-1
About This User's Guide ............................................................... 1-2
Terms & Conventions .................................................................... 1-4
Getting Started.................................................. 2-1
Running TeemTalk......................................................................... 2-1
Quitting TeemTalk ......................................................................... 2-1
Host Communications ................................................................... 2-3
Creating A Communications Session ............................................... 2-3
Making A Serial Host Connection ............................................. 2-3
Making A Network Host Connection......................................... 2-4
Creating A Connection Template ..................................................... 2-6
Using Environment Variables To Locate Settings Files ........... 2-7
Selecting A Connection Template .................................................... 2-7
Selecting The Terminal Emulation ................................................ 2-9
Tablet & Mouse Configuration ................................................... 2-10
Primary Setup Mode .................................................................... 2-11
The TeemTalk Display ................................................................. 2-12
The Title Bar ................................................................................... 2-12
The Minimize & Maximize Buttons ............................................... 2-13
The Menu Bar .................................................................................. 2-13
Resizing The Window .............................................................. 2-14
The Toolbar ..................................................................................... 2-15
The Scroll Bar ................................................................................. 2-16
The Soft Buttons .............................................................................. 2-16
The Status Bar ................................................................................. 2-19

Contents-2
Contents
The Window Border & Corners ...................................................... 2-20
The Emulation Workspace .............................................................. 2-21
Default Font Sizes .................................................................... 2-21
The Text Cursor ............................................................................... 2-22
The Selection Cursor ....................................................................... 2-22
The Gin Cursor ................................................................................ 2-23
Keyboard Configuration ................................... 3-1
Introduction ................................................................................... 3-1
DEC LK250 Keyboard Drivers ..................................................... 3-8
Keyboard Nationality .................................................................... 3-9
Cursor Keys ................................................................................... 3-9
Remapping The Keyboard ........................................................... 3-10
Programming A Key........................................................................ 3-12
Entering Control Characters ............................................................ 3-13
Key Combinations & Sequences ..................................................... 3-13
Entering Command Lines ............................................................... 3-14
Changing The Window Focus ......................................................... 3-14
Initiating A Script File .................................................................... 3-14
Action Locally Or Transmit To Host .............................................. 3-14
Default Key Definitions .................................................................. 3-15
Euro Sign ......................................................................................... 3-15
Compose Character Sequences ................................................... 3-16
Mouse Functions .............................................. 4-1
Introduction ................................................................................... 4-1
Redefining The Mouse Buttons ...................................................... 4-1
Selecting & Copying Text.............................................................. 4-3
Disabling The Copy & Paste Functions ....................................... 4-3
2-Button Mouse Emulating 3-Button ............................................ 4-4
Show & Action Hotspots ............................................................... 4-4
Send Keyword ................................................................................ 4-4
Moving The Cursor In Block Mode ............................................... 4-4
The Toolbar ........................................................ 5-1
Using The Toolbar ........................................................................ 5-1

Contents-3
Contents
The Predefined Button Tools ......................................................... 5-2
Redefining The Toolbar................................................................. 5-5
Adding Button Bitmaps ..................................................................... 5-5
Assigning Functions To Buttons ....................................................... 5-6
Removing Button Tools .................................................................... 5-8
Saving The Button Tools .................................................................. 5-8
Hotspots ............................................................ 6-1
Using Hotspots .............................................................................. 6-1
Defining Hotspots .......................................................................... 6-2
Setup Menus ..................................................... 7-1
Selecting & Closing Menus ........................................................... 7-1
Using The Menus ........................................................................... 7-2
Dialog Boxes ................................................................................. 7-3
Default Settings ............................................................................. 7-4
Creating A Connection Template .................................................. 7-5
Using Environment Variables To Locate Settings Files .................. 7-6
Selecting A Connection Template .................................................... 7-7
Menu Descriptions ........................................................................ 7-8
File Menu ........................................................................................... 7-8
Telnet Options ................................................................................. 7-19
Edit Menu ........................................................................................ 7-21
Settings Menu .................................................................................. 7-24
Emulation Settings .......................................................................... 7-25
Serial Settings .................................................................................. 7-27
NCSI Settings .................................................................................. 7-29
Terminal Settings ............................................................................ 7-31
Dialog Settings ................................................................................ 7-35
Gin Settings ..................................................................................... 7-38
Attributes ......................................................................................... 7-40
Keyboard Macros ............................................................................ 7-44
Euro Sign .................................................................................. 7-49
Soft Buttons ..................................................................................... 7-50
Mouse Button Actions ..................................................................... 7-54
Button Tools .................................................................................... 7-56
Help Menu ....................................................................................... 7-58

Contents-4
Contents
File Transfer....................................................... 8-1
Introduction ................................................................................... 8-1
Protocols Supported ...................................................................... 8-1
Sending Files ................................................................................. 8-3
Receiving Files .............................................................................. 8-5
Cancelling A File Transfer ........................................................... 8-7
Setting Protocol Parameters ......................................................... 8-8
General Parameters ............................................................................ 8-8
Kermit Parameters ........................................................................... 8-10
ASCII Parameters ............................................................................ 8-12
ZMODEM Parameters..................................................................... 8-14
Kermit Remote Operations .......................................................... 8-17
Local Operation .......................................................................... 8-19
ICL FTF File Transfer ........................................ 9-1
Configuration Requirements ......................................................... 9-1
Sending & Receiving Files ............................................................ 9-2
Transfer Options ........................................................................... 9-4
Remote Host Options ..................................................................... 9-7
FTP File Transfer ............................................. 10-1
The Transfer Procedure .............................................................. 10-1
Menu & Toolbar Options ............................................................ 10-7
The File Menu ................................................................................. 10-7
The Session Menu ......................................................................... 10-10
The Configure Menu ..................................................................... 10-11
The View Menu ............................................................................. 10-12
FTP Initialization File Entries .................................................. 10-13
Use Asynchronous Calls................................................................ 10-13
Disable Delete Command ............................................................. 10-14
FTP Command Line Options .................................................... 10-14
Progress Bar ................................................................................... 10-14
Disabling The Include Subdirectories Option .............................. 10-14
Time Out ........................................................................................ 10-14

Contents-5
Contents
Initialization Commands ................................ 11-1
Introduction ................................................................................. 11-1
Initialization File ......................................................................... 11-1
Windows 3.1x .................................................................................. 11-1
TeemTalk Private Profile File .................................................. 11-2
Windows 95 & NT .......................................................................... 11-3
Command Line Option Format ................................................... 11-5
Command Summary .................................................................... 11-6
Network Connection .................................................................... 11-8
Telnet Commands ...................................................................... 11-12
Session Configuration ............................................................... 11-13
Display....................................................................................... 11-17
Keyboard & Mouse ................................................................... 11-25
Printing...................................................................................... 11-27
Creating A Script File ..................................... 12-1
Introduction ................................................................................. 12-1
Initiating A Script File ................................................................ 12-1
Assigning Values To Variables ................................................... 12-3
Script File Examples ................................................................... 12-4
Syntax Conventions ................................................................... 12-12
Script Operators ........................................................................ 12-14
Command Descriptions ............................................................. 12-18
Error Numbers .......................................................................... 12-67
Script Error Trapping Functions .............................................. 12-71
PSET & PGET Parameters & Values ....................................... 12-73
FTU SET & GET Parameters ................................................... 12-86
Dynamic Data Exchange ................................ 13-1
Introduction ................................................................................. 13-1
DDE Terminology ....................................................................... 13-3
Hot & Warm DDE Links ............................................................. 13-3
Using The Edit Menu DDE Functions ........................................ 13-4

Contents-6
Contents
File Transfer ................................................................................ 13-6
Slave Mode .................................................................................. 13-6
Additional DDE Functions ........................................................ 13-18
DDE Link To A Visual Basic Application ................................. 13-24
Troubleshooting ................................................A-1
Virtual Key Names ............................................B-1
Standard Virtual Key Names ......................................................... B-1
DEC VT220 Virtual Key Names.................................................... B-2
Tek Virtual Key Names.................................................................. B-2
Key Reference Numbers ..................................C-1
Character Sets ..................................................D-1
Host Command Summary................................ E-1
VT52 Mode .................................................................................... E-1
ANSI VT100 Mode ......................................................................... E-3
ANSI VT220 Mode ......................................................................... E-6
Tek Mode ....................................................................................... E-7
W3220 Mode................................................................................ E-13
TeemTalk Additional Commands ................................................ E-15

1-1
Introduction
1
Introduction
This chapter introduces TeemTalk terminal emulation software for
Microsoft Windows and the contents of this User's Guide.
What Is TeemTalk?
TeemTalk for Windows provides precise emulation of a wide range of industry
standard text and graphics terminals on any PC running Microsoft Windows. Multiple
concurrent sessions with different hosts can be conducted over serial RS232 lines or
local area networks (LANs) including DECnet, TCP/IP and Novell.
TeemTalk incorporates an impressive range of additional features formulated to
increase productivity and reduce network loading. These include file transfer, session
capture and replay, dynamic data exchange, a toolbar, hotspots, soft buttons, keyboard
mapping, mouse button definition, connection templates, customising capabilities, a
comprehensive script language, and an optional Application Programming Interface
(API).

1-2
Introduction
About This User's Guide
This User's Guide describes how to use TeemTalk-05W, TeemTalk-07W and
TeemTalk-11W version 4.3.1 for Windows 3.1x, 95 and NT. The information
contained in the following chapters applies equally to TeemTalk-05W, TeemTalk-
07W and TeemTalk-11W unless indicated otherwise.
The illustrations in this User's Guide that show the TeemTalk window or dialog boxes
are shown in the Windows NT style. The layout for Windows 3.1 and 95 will be very
similar, but if their are significant differences then these will be illustrated accord-
ingly.
If you require information on network protocols and facilities, refer to the TeemTalk
for Windows Networking Guide.
Chapter 1: Introduction
Introduces TeemTalk for Windows and the contents of this
User's Guide.
Chapter 2: Getting Started
Describes how to use TeemTalk and configure it for
compatibility with your hardware and the application.
Chapter 3: Keyboard Configuration
Describes how to configure TeemTalk for your particular
keyboard, remap key functions and compose special characters.
Chapter 4: Mouse Functions
Describes the special functions assigned to the mouse buttons
by TeemTalk and how to redefine the buttons.
Chapter 5: The Toolbar
Describes how to use the toolbar and redefine the buttons.
Chapter 6: Hotspots
Describes the hotspot facility which enables functions to be
performed by clicking on keywords displayed on the screen.
Chapter 7: Setup Menus
Describes all the commands and setup dialog boxes that can
be accessed via drop-down menus in the menu bar.
Chapter 8: File Transfer
Describes how to transfer files using the Kermit, XMODEM,
XMODEM-1K, YMODEM Batch, ZMODEM and ASCII
protocols.

1-3
Introduction
Chapter 9: ICL FTF File Transfer
Describes the ICL FTF file transfer utility supported by
TeemTalk for Windows 3.1x in all terminal emulation modes.
Chapter 10: FTP File Transfer
Describes the FTP interface for file transfer across Windows
Sockets based networks.
Chapter 11: Initialization Commands
Describes commands that can be included in the initialization
file and on the command line to specify the loading
configuration for TeemTalk.
Chapter 12: Creating A Script File
Describes how to create a script file to automate certain
activities such as logging onto remote computers.
Chapter 13: Dynamic Data Exchange
Describes the support of dynamic data exchange (DDE) by
TeemTalk.
Appendix A: Troubleshooting
Provides answers to the most commonly asked questions.
Appendix B: Virtual Key Names
Lists all the virtual key names that enable you to include a
specific key function in a user definition for key macros, soft
buttons, hotspots, etc.
Appendix C: Key Reference Numbers
Lists all the valid key reference numbers used for key
programming in Tek Primary Setup and host commands,
and the script language PSET and PGET commands.
Appendix D: Character Sets
Shows the character set code tables supported by TeemTalk.
Appendix E: Host Command Summary
Lists the host commands that are supported in each terminal
emulation mode.

1-4
Introduction
Terms & Conventions
This User's Guide uses the following terms and conventions.
1. References to TeemTalk in the main text of this User's Guide apply
equally to TeemTalk-05W, TeemTalk-07W and TeemTalk-11W for
Windows 3.1x, 95 and NT unless indicated otherwise.
2. Some sections of this User's Guide assume you are using TeemTalk-07W
or TeemTalk-07W32 when describing various procedures. References to
TT07W in filenames and commands apply to TeemTalk-07W and
TeemTalk-07W32 and, unless indicated otherwise, should be substituted
with TT05W if you are using TeemTalk-05W or TeemTalk-05W32, or
TT11W if you are using TeemTalk-11W or TeemTalk-11W32.
3. An asterisk in a filename or directory name must be substituted with the
number indicating the version of your TeemTalk software unless specified
otherwise. For example, 07 for TeemTalk-07W.
4. When references to keys are shown linked by a + (plus sign), this means
that two or more keys have to be pressed at the same time. For example,
'press Ctrl + M' means press and hold down the Ctrl key, press the M
key then release both keys.
5. 'Click' means position the mouse pointer over an element on the display
then quickly press and release the specified mouse button.
6. 'Double click' means position the mouse pointer over an element on the
display then quickly press and release the specified mouse button twice
in quick succession.
7. 'Drag the pointer' means hold down the left mouse button (or button
assigned with the select function) and slide the mouse so that a selection
box is displayed.

2-1
Getting Started
2
Getting Started
This chapter describes how to run TeemTalk and configure it for
compatibility with your hardware and the application.
Running TeemTalk
To run TeemTalk, display the TeemTalk group window (or the window you specified
when installing the software) and select the icon shown below.
Mouse: Double-click the TT05W, TT07W or TT11W icon.
Keyboard: Press Ctrl + Tab until the icon is selected then press Return.
The screen will display a copyright message then the TeemTalk window (shown
overleaf) in which the DEC VT100 emulation is running by default.
Quitting TeemTalk
You can quit an instance of TeemTalk in one of two ways, from the File menu when
the window is displayed, or the Control menu when the window is displayed or
iconized.
Quitting using the File menu:
Mouse: Click on File in the menu bar to display the File menu, then click the
Exit option.
Keyboard: Press Alt + Fto display the File menu, then press Xto exit.

2-2
Getting Started
Quitting using the Control menu:
Mouse: If the window is displayed, click the box or icon in the top left corner of
the window to display the Control menu, then click the Close option.
If the window is iconized, click the icon to display the Control menu
then click the Close option.
Keyboard: If the window is displayed, press Alt + Spacebar to display the
Control menu. Press the down arrow key until the highlight rests over
Close then press Return.
If the window is iconized, press Alt + Esc until the icon title is
highlighted then Alt + Spacebar to display the Control menu. Press the
down arrow key until the highlight rests over Close then press Return.

2-3
Getting Started
Host Communications
Creating A Communications Session
When TeemTalk is loaded for the first time, a dialog box will be displayed which
enables you to configure TeemTalk for a serial or network host connection.
Note: If you do not wish to make a host connection at this moment,
just click the Cancel button to close the dialog box. You can
display the New Connection dialog box again later by
clicking File in the menu bar and selecting New
Connection... in the menu.
The Type option specifies whether a serial or network connection is to be made.
Clicking the arrow button will display a drop-down list box containing all the
possible settings.
The Services option specifies the port or network host node which TeemTalk is to
communicate with. This is a text box with an associated drop-down list box. You can
either make a selection from the list box or enter a valid host name or internet address
in the text box.
Note: If you are unfamiliar with using dialog boxes and setup
menus, refer to the beginning of the Setup Menus chapter.
Making A Serial Host Connection
To connect to a serial host, select Serial in the Type list box (default), then select the
Com port required in the Services list box.
Click the Configure... button to display the Serial Settings dialog box (shown
overleaf) and make sure the settings match that of the host.
Click OK to return to the New Connection dialog box then click the Connect button.

2-4
Getting Started
Note: The options in this dialog box are described in the Serial
Settings section in the Setup Menus chapter and only apply
when the connection type is set to Serial.
The status bar along the bottom of the TeemTalk window displays two LEDs. The first
LED indicates whether or not you are connected to the host. It will show red when
not connected and green when you are connected. The second LED indicates
whether or not data is being sent to or from the host. It will show dull green when
there is no activity, red when data is being sent to the host, and bright green when
data is being received from the host.
Making A Network Host Connection
To connect to a network host, select the protocol required in the Type list box:
TeemTalk for Windows 95 and NT:
TCP/IP CTERM WinSock 2
NetBIOS MultiLan ISDN
LAT Microsoft SNA TeemTalk-OSI (option)
TeemTalk for Windows 3.1x:
LAT NetBIOS B and W. TCP INFOConnect
FTP PC/TCP OSLAN WinSock ISDN
Sun PC/NFS TELAPI Ext. NCSI DOSLANTI
LAN W/Place BAPI Eicon X25 MultiLan
NetManage Interrupt 14 IPX/SPX
PathWay INT6B / NASI NetWare for LAT
CTERM LanManager TeemTalk-OSI
Note: Refer to the Network Connection chapter in the Networking
Guide for a description of each protocol supported and for
any additional configuration required prior to making a
connection.

2-5
Getting Started
The Services list box (in the New Connection dialog box) will display the devices on
the network which use the currently selected protocol. Click the name of the device
required or, in the case of TELAPI, enter an Internet address in the text box (for
example, 128.127.126.2). Note that either the host name or IP address may be entered
for TCP/IP connections. When Eicon X25 is selected, TeemTalk requires you to enter
a valid X25 address as none will be listed.
The Telnet Options button becomes available when a Telnet protocol is selected in
the Type list box. The dialog box displayed when this button is clicked is described
in the Setup Menus chapter.
Clicking the Connect button or the name of the host in the Services list box twice
will cause TeemTalk to attempt to connect to the specified host. If a connection cannot
be made because the network driver is not installed or the host node name is invalid,
an error message will indicate this. Failure to connect for any other reason will result
in a Connection Failed message.
The status bar along the bottom of the TeemTalk window displays two LEDs. The first
LED indicates whether or not you are connected to the host. It will show red when
not connected and green when you are connected. The second LED indicates
whether or not data is being sent to or from the host. It will show dull green when
there is no activity, red when data is being sent to the host, and bright green when
data is being received from the host.
Connection to the network host node will close if you change the settings in the New
Connection dialog box and attempt to connect, if you log out of the host, or the host
closes the connection. When the host closes the connection a message box will be
displayed giving you the option of reconnecting to the network host node, cancelling
the message box and returning to TeemTalk, or exiting TeemTalk.
A warning message will be displayed if you attempt to open a new session while a
session is already open. If you attempt to exit TeemTalk while a network session is still
active, the following message box will be displayed:
Any of these message boxes can be disabled so that the current connection is
automatically closed when the host closes the connection, a new session is opened, or
TeemTalk is exited. Refer to the Initialization Commands chapter for details.

2-6
Getting Started
Creating A ConnectionTemplate
You can save the current session configuration as a connection template. To make
TeemTalk automatically attempt to make a host connection using the same settings the
next time it is loaded, click the File option in the menu bar to display the File menu,
then click the Save Session option.
TeemTalk enables you to create multiple connection templates, any one of which can
be used either when TeemTalk is loaded or while it is running. The procedure is as
follows:
1. In the File menu, select the Save Session As... option to display a dialog box.
2. In the Saved Items box, indicate which user preference settings are to be saved by
checking the boxes next to the relevant options.
3. In the Settings File text box, specify the name of the terminal emulation settings
file (and the directory path if different from the default) which is to store settings
only affecting the terminal emulation. The default filename is tt*w.nv where *is
05, 07 or 11, depending on your version of TeemTalk.
4. In the Save As File Name text box, specify the name of the workspace settings file
(and the directory path if different from the default) which is to store the user
preference settings selected by the Saved Items options. The default filename is
tt*w.wsp where *is 05, 07 or 11, depending on your version of TeemTalk.
Note: Splitting the saved settings into two files enables users to
share a common terminal emulation settings file while
allowing each user to have their own workspace settings
file.