XHDATA D-109 User manual

OPERATION MANUAL
FM ST/LW/MW/SW
D-109
GLOBAL BAND RADIO
WITH STEREO WIRELESS BT PLAYER
https://xhdata.com.cn/pages/d-109-manual
German.French.Spanish.Italian Operation manual

Earphone jack
FM/SW external
antenna jack
Type-c: DC IN 5V
Volume knob
Tuning knob
MEMORY: Memory radio frequency
12/24: 12/24 time system switching
9/10K: AM 9K/10K frequency step switching
DPY
:Key lock/display switch
A/B
p
oint re
p
eat function.
VM:Store radio frequency selection button.
VF:Manual tuning frequency of tuning knob
STB:FM stereo switch button / Beep tone switch
BW AM bandwidth switching/LCD backlight
SW - :Shortwave meter band switching/Automatic
search of shortwave meter band
SW + :Shortwave meter band switching/Automatic
search of shortwave meter band
MW/LW:AM/LW band selection/automatic tuning
storage
FM: FM/Automatic tuning storage
POWER: Power : switch
SLEEP: Sleep shutdown time setting
ALARM B:ALARM(B) setting/Alarm switch
ALARM A:ALARM(A) setting/Alarm switch
Time: Time setting/display time
BT/ Bluetooth function/wireless phone call
tuning.Select the previous next song when playing
Bluetooth music.
Play the pause selection
TF card play and repeat mode selection
MUSIC
DELETE: Delete radio frequency
FM SET: FM receiving frequency range switching
SCAN:Radio auto browsing function/MP3
permanently on and intelligent control switch
Radio memory station selection/and frequency
Function indication

System reset
Function indication
TF card
DISPLAY
Battery level displa
Full power
Sleep Scheduled Shutdown Start
Alarm A start icon
Alarm B start icon
Low power
yRadio signal field strength
AM/PM time display
SW meter wave display
Alarm A time display icon
Alarm B time display icon
Memory station number display icon
Temperature display
FM STERE
Small display area
O
Setting icon of radio station timing startup
TF card icon
AM/PM time display
Battery charging display
Radio signals strength scale
Radio Signal-to-noise ratio scale value
Mobile phone call prompt symbol
Radio search station frequency icon
Single Repetition
AM frequency unit
FM frequency unit
Disk locking symbol
Bluetooth function symbol
FM/MW/SW/LW:FM/MW/SW/LW band display ico
Main display area
Time/frequency/playback time display
n
2.

Operation introduction
POWER
Power on: short press power button,display screen shows "ON"
Please correctly install the positive and negative electrodes of
3.7V(18650)lithium battery into the battery box
POWER ON/OFF
External 5VType-c charging socket power supply
Power off: short press power button,display screen shows"OFF"
Different countries,medium wave,FM frequency coverage is different,please set
according to the situation of different countries
SET THE FREQUENCY COVERAGE
Long press the number key(3),you can switch the time to 24 hours or 12 hours
(It needs to be set in the power off state)
In this state, the temperature displays Celsius(℃)
FM frequency range setting:
After press and hold the number key(1),by short pressing the number key(1),the
screen will say 64,76,87,87.5,Denote frequency coverage
as:64-108MHZ,76-108MHZ,
87-108MHZ,87.5-108MHZ
MW frequency selection step interval:
Setting and temperature display synchronous switching
1. Long press the number key(2)for 3 seconds:
When it shows 9:the medium wave frequency will step to 9KHz. Frequency
coverage range:522-1620KHz.(suitable for Asia, Europe.Africa and Oceania)
Radio operation
3.

Select band
In this state, the temperature displays Fahrenheit(°F)
Search station frequency
Long press the(MW/LW)button,and the display(ON)indicates the
open (LW)band. Long press again Display(OFF) off
2.When it shows 10 :the medium wave frequency will step to 10KHz.
South America)
(POWER)key to (ON)
Adjust the volume to the appropriate position
open (LW)band. Long press again Display(OFF) off
Frequency coverage range:520-1710KHz(suitable for North and
Short press(FM)key,or(MW/LW or SW -/SW +),
Adjust the volume to the appropriate position
South America)
Tune the radio frequency
Switch short wave meter band:Repeated short press(SW -/SW +)
1. Manually tune the radio frequency(VF)
When receiving FM and SW,you can choose to use pull rod antenna
3. Scanning frequency(VF)
Short press(VF) key
or external antenna.(Plug the external antenna into the ANT socket)
2. Input the radio frequency with the number keys(VF)
Turn the fusela
g
e an
g
le when MW and LW are used to obtain the
Long press (SCAN) button to enter browsing.When the station
Turn the tuning knob slowly and quickly(TUNING)
best receiving sensitivity
The preferred current band radio frequency is entered directly with
is scanned, it will stop for 5 seconds.Short click (SCAN) to stop
the numeric key
searching
Enter radio mode
4.

Search for memor
y
stations
1. Manual memory station(VF)
2. Fully automatic scanning memory
Select the preferred band
Select radio frequency to memory
Short press (MEMORY) key, radio station code flashes in the
upper right corner
Press the (MEMORY) key again to remember
Select band
Long press the corresponding band key to automatically scan
and memorize the radio frequency
Two modes of shortwave automatic search
Long press the (SW -) key for 3 seconds for the full meter band
—Tips —
Long press the (SW +) key for 3 seconds as the current meter
search memory mode
Band search memory mode
1. After the station search is completed, you can enter the memory
Access memory radio station(VM)
The radio signal will be affected by such factors as season/time period/weather,
receiving environment,electromagnetic interference and receiving antenna angle and
azimuth. Therefore, ATS memory should be updated frequently
Radio mode or press the (VM) key briefly
2. Turn the (TUNING) button to switch the memory radio frequency
3. Input the frequency number of the memory station directly with
the number keys
5.

Delete memory station method
Auto scan memory radio frequency(VM)
1.Select band, short press(VM) key, press and hold the(SCAN) key
Select Delete Memory Station
for 3 seconds to enter the automatic browse mode
2.Scan each memory radio station number for 5seconds,and short
press the SCAN key briefly to select listening. No action, continue
to scan the address number of the next radio station
1. Short press the (VM) key to enter the state of retrieving memory
station
2.Select band
3.Turn the (TUNING) button to select the radio station number
to confirm the deletion
[ALL] flash, and then press and hold the (BT) key for 3 seconds
the deletion of all
2. Press and hold the (DELETE) key for 3 seconds until [DEL] and
display (ALL), release it and press it briefly again to confirm
1. Turn off a machine
3. Press and hold the (DELETE) key until the sub display area
2. Select band
station
1. Short press the (VM) key to enter the state of retrieving memory
short press again to confirm deletion
Delete all memory radio frequencies
4.Long press(DELETE) key for 3 seconds to display [DEL], and
Delete all memory stations of the current band
frequency to be deleted
6.

Switch AM bandwidth
Continuous short press (BW/ ) can switch AM bandwidth
FM stereo switch
1. FM is mono radio mode when horn is used for radio reception
2. In the headset receiving FM state, short press the (ST/B) key,
stereo symbol( )display. Click the stereo symbol ( )
again to show cancel, stereo off
Stereo Headphone Output
This machine is equipped with FM and Bluetooth/MP3 stereo
headset output .Use the 3.5 headphone jack.
FM/SW external input jack
The machine is equipped with FM/SW external antenna 3.5
circularly
headphone socket to improve the indoor reception sensitivity
of FM/SW radio
—Tips —
Stereo will not be turned on when the radio station uses mono
radio or the reception signal is weak
Bluetooth/MP3 playback function
1.Insert TF card with music file
TF Card MP3 player
2.Press the(MUSIC) key briefly to enter the
TF card MP3 playing state
functions
3. Short press these two keys to select the
previous song and the next song [TUNING] can
also select songs. Long press for fast rewind and fast forward
4. Play/pause function button
7.

5. Long press and hold this key icon to display, which
radio frequency number
(timed boot time)alarm A and alarm B,(local time)and memory
can be switched to [signal strength/signal-to-noise ratio] value,
repeatedly and briefly, the display area on the upper right corner
can be switched to [signal strength/signal-to-noise ratio] value,(timed boot
When using the radio function: Short press the( )key
2.Long press again to reconnect the device
for 2 seconds to disconnect the current device.
1.When Bluetooth is connected, long press button( )
press once to end the call
briefly press ( ) to answer the call, and then briefly
When there is a phone call in Bluetooth connection status,
to select a song or directly select songs on your mobile phone
3.Short press( ) or ( ) key and turn the [TUNING] button
( )
and connect, and the successful connection is displayed
phone, search the Bluetooth connection name ( D-109 )
2.Open the Bluetooth connection interface of the mobile
1.Short press( )key to enter Bluetooth playing status
Press key(B) again to play again at point A/B
When MP3 player is playing, press key(SCAN) briefly to display(A)
for all song areas
icon ( )again to turn off, which is a cycle playback mode
Bluetooth forced disconnection
Wireless call
Music playing
is a single song cycle playback mode.Press and hold the
6.A/B point repeat function:
Display content switching
Bluetooth function operation
8.

turning off if the( )or( ) icon is not displayed
Short press (ALARM A) or (ALARM B), and the alarm will be
( ) ( ) respectively displays the alarm enabled
Short press the (ALARM A) or (ALARM B) key, and the icon
them respectively with the [TUNING] button
4.Input (hour) and (minute) with the number keys or adjust
3.Long press the (TIME) key, and the clock will flash
2.The time can be adjusted in the on/off state
set the 12/24 time system
1.Under the shutdown state, long press the number(3)key to
turn off the sleep shutdown setting
Select to turn ( ON ) the machine function again, and then
seconds for automatic confirmation
to select the boot time [01-120] minutes, and then flash for 3
press the (SLEEP) key continuously or turn the (TUNING) key
Short press the(SLEEP)key briefly, the ( ) icon flashes,
backlight on, and then press and hold again to turn it off
Press and hold the(BW/ )key for a long time to keep the
then turn off
Press any button in any state to light up for 5 seconds and
Cancel (SLEEP) shutdown function
Long bright mode
Press the (POWER) key to (ON)
Automatic backlight on
Switch (ALARM)
Display backlight switch
Sleep timed shutdown mode
Set clock
Alarm and timed power on function
9.