Xiaomi MI 5G CPE Pro User manual

5G CPE Pro User Manual

Product Overview
Read this manual carefully before use, and retain it for future reference.
Thank you for choosing Xiaomi 5G CPE Pro. It provides a high-speed
5G experience. You can enjoy data service via Wi-Fi or ethernet cable.
This user manual briefly describes the appearance, usage, and procedures on how to configure
the settings of this product.
Note: Illustrations of product, accessories, and user interface in the user manual are for
reference purposes only. Actual product and functions may vary due to product enhancements.
1
1
2
3
4
5
6

Show the status of the 5G signal, 4G signal, Wi-Fi,
and SYSTEM of the router
Turn on: Press and hold the button for more than 3 seconds
when the router is off
Turn off: Press and hold the button for more than 3 seconds
when the router is on
Press and hold the button for more than 5 seconds to restore
factory settings
Open the cover, and then insert the SIM card
For endpoint device or broadband connections
For power input
Indicator
Power Button
4G
Wi-Fi
SYSTEM
Reset Button
SIM Card Slot
Ethernet Port
Power Port
White: Strong signal
Blinking white: Weak signal
Off: No signal
5G
White: Strong signal
Blinking white: Weak signal
Off: No signal
White: Wi-Fi is on
Off: Wi-Fi is off
White: Operating normally
Orange then turns into white: Starting normally
Orange: Error
Blinking orange: System updating
Off: The router is turned off
Indicator Descriptions
2
1
2
3
4
5
6
Parts Introduction

How to Use
1. Make sure to use nano-SIM card.
2. Open the SIM card cover on the back of the router.
3. Insert the SIM card into the slot as illustrated.
3
mini-SIM (2FF) micro-SIM (3FF) nano-SIM (4FF)
SIM card

4. Close the SIM card cover.
5. Plug the power adapter into the router, and the indicators will
light on when the router is connected to the network successfully.
4
Connecting to Wi-Fi
You can connect your smartphone or other electronic devices
to the Wi-Fi by the default Wi-Fi name and password. The Wi-Fi
name and password are on the bottom of the router.
Note: Please open the management page to change the default Wi-Fi name and password
in time. You need to reconnect to the Wi-Fi after the Wi-Fi name or password is changed.
Managing Your Router
Once the initial Wi-Fi is connected, Log in to the management page
at router.miwifi.com or 192.168.31.1 via a web browser to manage
your router. Follow the instructions on the page to complete the
configuration process. The default login password is on the bottom
of the router.
Note: Please open the management page to change the default login password in time.

1. How to reset the router to factory settings?
Make sure the router is turned on and starts working. Press and hold the Reset button
for more than 5 seconds, and release the button when the system indicator turns orange.
The reset will be completed after the router is successfully restarted.
Caution: Restoring to factory settings will cause a total loss of the data, including CPE
configuration and SMS. It is recommended to back up your data before restoring factory
settings.
2. What should I do if the 5G signal indicator and 4G signal indicator are off?
Step 1: Check whether the SIM card is correctly installed.
Step 2: Check whether the SIM card works well.
Step 3: If your SIM card requires a PIN, enter the correct code to unlock the card.
Step 4: Restore to factory settings and try again if the problem still exists.
3. What should I do if I forget the login password or Wi-Fi password?
Restore the router to factory settings. The default login password and Wi-Fi password
are on the bottom of the device.
4. What should I do if the Internet speed is slow?
Step 1: Check whether the indicator is blinking. If it is, move the router in a place
with better signal reception.
Step 2: Make sure to use the 5 GHz Wi-Fi network if your smart device is connected
to the internet via Wi-Fi.
Step 3: Check whether the cellular speed is limited by your operator.
Step 4: Restore to factory settings and try again if the problem still exists.
FAQ
5

Regulatory Compliance Information
Hereby, Xiaomi Communications Co., Ltd. declares
that the radio equipment type CB0401V2 is in compliance
with Directive 2014/53/EU.The full text of the EU
declaration of conformity is available at the following
internet address:
http://www.mi.com/global/service/support/declaration.html
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should
not be mixed with unsorted household waste. Instead, you should
protect human health and the environment by handing over your
waste equipment to a designated collection point for the recycling
of waste electrical and electronic equipment, appointed
by the government or local authorities. Correct disposal
and recycling will help prevent potential negative consequences
to the environment and human health. Please contact the installer
or local authorities for more information about the location as well
as terms and conditions of such collection points.
6
Europe - EU declaration of conformity
Disposal and recycling information

Warning
To comply with CE RF exposure requirements, the device must be installed and operated 20 cm
(8 inches) or more between the product and all person’s body.
Operation of this equipment in a residential environment could cause radio interference.
This device is restricted to indoor use only when operating in 5150-5350MHz frequency range
in following countries:
Privacy Policy
Privacy PolicyTo better understand how we use and protect your personal information,
please read the Privacy Policy at https://privacy.mi.com/support
To understand how we use and protect your personal information on this device, open
the web-based management page, access Statement about Xiaomi Privacy Agreement,
and read our privacy policy.
Software Update
By continuing to use this device, you indicate that you have read and agree to the following
content:In order to provide better service, this device will automatically obtain software update
information from Xiaomi or your carrier after connecting to the Internet. This process will use
mobile data, and requires access to your device's unique identifier (IMEI/SN) and the service
provider network ID (PLMN) to checkwhether your device needs to be updated.This device
supports the automatic update feature. Once enabled, the device will automatically download
and install critical updates from Xiaomi or your carrier. The function is enabled by default,
and can be disabled from the settings menu on the web-based management page.
7

Wi-Fi
5G NR NSA
LTE
2412 MHz–2472 MHz (≤20 dBm) 5150
MHz–5350 MHz (≤23 dBm) 5470
MHz–5725 MHz (≤30 dBm)
n1/n3/n7/n28/n38/n75/n77/n78 (≤26 dBm)
Band 1/3/7/8/20/28/32/38 (≤25.7 dBm)
Operating Frequency and Radio Frequency Power (radiated and/or
conducted) nominal limits applicable to this radio equipment
are as follows:
Manufactured by: Xiaomi Communications Co., Ltd.
Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road,
Haidian District, Beijing, China
Importer:
Beryko s.r.o., Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz
Xiaomi 5G CPE Pro
CB0401V2
-10°C to 45°C
Name
Model
Operating Temperature
8
Specifications