XiaoPai FX801 User manual

Instruction Manual
Please carefully read this instruction manual
before you start to use this device.And please kindly
keep this manual for necessary check in the future.

1. Regular Information········································1
Buttons and Indicators··································1
Accessory and Interface································2
2. Download and Set up the App of Device··················3
3. Guide for Initial Usage····································4
Sign up and Sign in the Account·······················4
Forgot Password·········································5
Connect and Bind the Device··························6
4. General Instruction for APP·······························8
Homepage················································8
Feed ······················································9
Video····················································10
Settings··················································11
More ····················································14
5. Answers for Popular Questions in Usage·············15
Content

1
1
3
2
4
1. Switch button: Press it to open the feeder cover.
2. Setting button:
1) Press the Setting button in a short time: It will feed a share of feed when you
press once.
It is ineffective to press the buttons when the Motor rotating.
2) Hold the Setting button :The device will be reset after you hear Ding-Dong when
you press the button for about 5 seconds.
3. Red indicator light
1) Light is continuously on: The device is in a work status.
2) Light is off: The device is off power.
3) Light is flickering: There is a fault with the device.
4. Green indicator light
1) Light is off：System is in setup status.
2)Flicker slowly (flicker once in one second): The device is waiting for
connection,which means it is in AP mode.
3) Flicker quickly (flicker seven times in one second): The device is networking .
4) Light is continuously on: The device is successfully connecting to the network.
Please do not cut off the power supply and do not turn off the switch or even do
not disconnect the network when the light is in quickly flicker situation.
1.Regular Information
Buttons and Indicators

2
8
6
7
Accessory and Interface
1. Top Cove: With transparent and visible material , you can easily check the rest
quantity of food inside.
2. Mic: Record your voice.
3. Wide-angle lens:130°visible vision-angle.
4. Discharge outlet: Where food come through.
5. Bowl for holding food: Removable and with buckle-designed.
6. Power interface: Interface for power supply.
7. Battery compartment: The place to put backup battery.
8. Power switch: O means power off, —means power on.

3
（QR code for IOS PetFun ）（QR code for Android PetFun）
Method NO.2：Search the PetFun in Method NO.2：Search the PetFun in
Apple store to download and install it Google-play to download and install it.
Download and Installation for
Android System Phone
Two ways to download and install
the APP.
Method No.1: Scan QR code
below.
Download and Installation for
IOS System Phone
Two ways to download and
install the APP.
Method No.1: Scan QR code
below.
2.Download and Set up the App of Device

4
Sign up Account
1. Open PetFun App
2. Click Sign Up
3. Fill Information
To ensure that the mailbox
can be used to prevent password
loss, if lose,it can be used to
retrieve the password.
For your account security,
please fill in 6 or more passwords.
4. Click Submit to finish register.
Sign In Account
1. Sign in account
1) Enter your registered email
and password.
2) Click Sign In.
3) Log in successfully, jump to
binding page.
2. Authorized login
1) log in to
the button you want to select.
2) Operate with the authorized
login prompt.
3) Log in successfully, jump to
binding page.
3. Guide for Initial Usage

5
Forgot Password
1. Click Retrieve password.
2. Enter your registered email.
3. Click OK.
4. Open the mailbox to get the
password we sent you for
password reset.
5. Click Reset password
6. Enter the new password.
For your account
security,please fill in 6 or more
passwords.
7.Reset new password successfully.

6
Connect and Binding the
Device
1. Waiting for Connection
1) Plug in the power, and turn
on the switch.
2) Waiting the green indicator
light continuously on or
flicker.
3) Press the Set button for a
while (about 5 seconds) until u
hear Ding-Dong.Click the
Next when the green indicator
light is slowly flickering.
Make sure your mobile
device is connected to the
available WIFI network.
2. WIFI Connection
When the smart phone is
connected to the WIFI, the
WIFI name will be
automatically displayed, then
enter the corresponding WIFI
password and click Next.
3. Set the WIFI of the
device.
1）iPhone :
Enter the mobile phone
WIFI settings interface, and
connect the WIFI named
PETFUN_XXXXXX .After the
success of the connection,
double-click the phone HOME
key to return to the "PetFun"
program.

7
2) Phone with Android
System：
Click Next to enter the WIFI
settings,and connect WIFI
named PETFUN_XXXXXX
device WIFI.After the success
of the phone back to the button
to return to the "PetFun"
program.
4. Connected to the WIFI of
device, please click Next.
5.Mobile Phone is connecting
with the device.
6. Device connection is
finished.

8