XPOtool 30181 User manual

User’s manual
Loading Ramp
30181–30187, 30189, 30190, 30192–30196, 30199–30201
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.

https://www.XPOtool.com Item 30181–30187, 30189, 30190, 30192–30196, 30199–30201 Page 2
The Tool Experts
05 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.XPOtool.com Item 30181–30187, 30189, 30190, 30192–30196, 30199–30201 Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Always wear protective gloves!
Warning! Danger of injuries and damages if used improperly!
•Always respect and abide the safety instructions.
•Keep persons not involved in loading well away from the loading ramp.
•Avoid working alone. When working in pairs or with more persons, you will be able to assist one
another if anything unforeseen happens.
•Always make sure that the working zone is sufficiently lit.
•Wear suitable clothing. Do not wear loose clothing or jewellery. They could get caught by moving
parts. Wear non-conductive clothes, solid non-skid shoes, and work gloves.
•Protect long hair under a hairnet or tie it safely together.
•Wear protective goggles and hearing protection.
•Make for a secure footing to be able to keep your balance.
•Only use the device as described in the manual; otherwise, damages might occur and warranty
might expire. Never exceed the max. admissible capacity.
•Always be careful. Do not use the device when being tired or under the influence of alcohol,
drugs, or medicine.
•Before operating the device, check it for damages. Have all damaged components replaced by
an expert.
•Only use original spare parts. When using non-original spare parts, warranty will expire. Only
use spare parts suitable for the device.
•All maintenance work must be done by an expert.
•Only use the device on a flat, level, and solid surface. Make sure that the end with the
hooks/latch(es) rests completely on the rear flap or loading space of the vehicle.
•Make sure that the ramp is free of dirt, grease, and oil. Slip danger!
•After unpacking, check for completeness of components.
Use
•Keep animals and people away from the ramp and loading space.
•Never load a vehicle with the engine running. To be absolutely sure, wait for the engine to cool
down before loading.
•Never exceed the max. admissible weight rated. Load slowly. Do not drop anything onto the
ramp. Dropping a load onto the ramp might reduce the capacity and lead to damages and/or
injuries. Only use the device on a hard, level, solid surface.
Loading a motorcycle
•This work should be done by 3 individuals.
•Make sure that the ramp is free of dirt, grease, and oil. Slip danger!

https://www.XPOtool.com Item 30181–30187, 30189, 30190, 30192–30196, 30199–30201 Page 4
The Tool Experts
05 2022-1
•Make sure that the end with the hooks/latch(es) rests completely on the rear flap or loading
space of the vehicle.
•Make sure that there is one person at either side of the motorcycle. Each person must hold the
handlebar or front-wheel fork to guide the motorcycle.
•With the other hand, they must hold the rear side of the seat or the rear-wheel fork. The third
person must stand behind the motorcycle to push it. After that, the person must stand on the
loading space to guide the motorcycle.
•Set the motorcycle to idle cycle.
•During loading, make sure that the ramp cannot move and the hooks/latch(es) still rest com-
pletely on the rear flap. If they do not, roll the motorcycle back with care and repeat.
Cleaning and maintenance
•Remove all greasy substances from the ramp, e.g., dirt, fat, oil, to avoid any slip danger.
•Regularly check the device for damages.
•Tighten all screws and nuts before each use.
Technical specifications
Item number
30181
30182
30183
30184
30185
30186
Size (㎜)
opened
1820×305
2260×295
2260×305
2230×290
2260×305
2260×305
closed
910×305
1160×295
1160×305
1170×290
1160×305
1160×305
Max. capacity (㎏)
200
340
340
340
340
680
Weight (㎏)
7.3
8.5
8
8.4
8
9
Item number
30187
30189
30190
30192
30193
30194
Size (㎜)
opened
1830×380
3100×305
1600×177
2280×280
2150×280
2260×295
closed
920×380
1650×305
(1)
1156×280
1100×280
1160×295
Max. capacity (㎏)
110
540
270
680
340
410
Weight (㎏)
7.55
18.3
4.3
13
8.7
10.9
Item number
30195
30196
30199
30200
30201
Size (㎜)
opened
2260×305
2740×450
1920×163
1610×305
1630×163
closed
1160×305
1410×450
(1)
(1)
(1)
Max. capacity (㎏)
340
400
182
2025
182
Weight (㎏)
7.7
21.6
4.4
14.8
3.6
(1) = not folding
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.